Cannot shutdown power use from built in webcam in thinkpad T530 questions]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Oleksij Rempel
Quoted 2 lines
Understood, just making sure this was still potentially useful considering what I found out since my last message.
Which version of powertop are you actually using? None of current
The latest, i.e. 2.4.
Quoted 1 line
versions would show you Watt usage for devices.
Sure it does :)
Summary: 3182.2 wakeups/second, 82.5 GPU ops/seconds, 0.0 VFS ops/sec and 33.5%
Power est. Usage Events/s Category Description
9.82 W 100.0% Device USB device: Yubico Yubike 2.67 W 4.1 ms/s 43.2 Process /usr/bin/pulseaudio --sta 2.58 W 100.0% Device USB device: Integrated Ca 2.35 W 100.0% Device USB device: BCM20702A0 (B 2.32 W 32.9% Device Display backlight 1.39 W 100.0% Device Radio device: btusb 343 mW 100.0% Device Radio device: thinkpad_ac
Now, I've found those values to be often wrong or questionable.
Quoted 4 lines
you can use "watch grep . *" instead and check fallowing fields:
runtime_suspended_time- suspend time. If it is growing device is suspendedruntime_active_kids- if not zero, some program use it
control - if "on" then autosuspend is disabled.
Understood.
Thanks,
Marc
Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/ Am 28.09.2013 20:08, schrieb Marc MERLIN:
Quoted 14 lines · Oleksij Rempel
Quoted 4 lines
Quoted 2 lines
Understood, just making sure this was still potentially useful considering what I found out since my last message.
Which version of powertop are you actually using? None of current
The latest, i.e. 2.4.
Quoted 1 line
versions would show you Watt usage for devices.
Sure it does :)
Summary: 3182.2 wakeups/second, 82.5 GPU ops/seconds, 0.0 VFS ops/sec and 33.5%
Quoted 8 lines
Power est. Usage Events/s Category Description
9.82 W 100.0% Device USB device: Yubico Yubike 2.67 W 4.1 ms/s 43.2 Process /usr/bin/pulseaudio --sta 2.58 W 100.0% Device USB device: Integrated Ca 2.35 W 100.0% Device USB device: BCM20702A0 (B 2.32 W 32.9% Device Display backlight 1.39 W 100.0% Device Radio device: btusb 343 mW 100.0% Device Radio device: thinkpad_ac
ah ok, i see, you right. In usb.cpp:
double usbdevice::power_usage(struct result_bundle *result, struct parameter_bundle *bundle)
{
double power;
double factor;
double util;
if (rootport || !cached_valid)
return 0.0;
power = 0;
factor = get_parameter_value(index, bundle);
util = get_result_value(r_index, result);
power += util * factor / 100.0;
return power;
}but, if i understand it correctly, this values are not provided by usb. If you start "powertop --calibrate" it will switch on/off some devices and measure global power usage.
Signature · 2 lines
Regards, Oleksij