i.MX6 and Nitrogen6x updates
cover i.MX6 and Nitrogen6x updates
This patch series updates U-Boot and the Linux kernel for the Boundary Devices Nitrogen6x board to the latest production-ready releases and also updates Freescale-provided packages to the matching versions to maintain ABI compatibility.
Eric Nelson (4):
nitrogen6x: bump U-Boot to latest production version (2013.07)
nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
nitrogen6x: bump kernel to latest version (3.0.35-4.1.0) i.MX6: Update Freescale hardware-acceleration bits to latest versions
board/boundarydevices/nitrogen6x/6q_bootscript | Bin 455 -> 0 bytes board/boundarydevices/nitrogen6x/6q_upgrade | Bin 1587 -> 0 bytes board/boundarydevices/nitrogen6x/6x_bootscript | Bin 0 -> 1653 bytes board/boundarydevices/nitrogen6x/6x_upgrade | Bin 0 -> 1744 bytes board/boundarydevices/nitrogen6x/post-build.sh | 14 +++++++------ configs/nitrogen6x_defconfig | 4 ++-- package/freescale-imx/freescale-imx.mk | 4 ++-- .../gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk | 8 +++++--- package/freescale-imx/imx-lib/imx-lib.mk | 11 ++++++++++- .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk | 4 ++-- package/libfslcodec/libfslcodec.mk | 4 ++-- package/libfslparser/libfslparser.mk | 8 +++++--- package/libfslvpuwrap/libfslvpuwrap.mk | 22 +++++++++++++++++++-- 13 files changed, 56 insertions(+), 23 deletions(-) delete mode 100644 board/boundarydevices/nitrogen6x/6q_bootscript delete mode 100644 board/boundarydevices/nitrogen6x/6q_upgrade create mode 100644 board/boundarydevices/nitrogen6x/6x_bootscript create mode 100644 board/boundarydevices/nitrogen6x/6x_upgrade
Signature · 1 line
1.8.1.2
PATCH 1/4 nitrogen6x: bump U-Boot to latest production version (2013.07)
--- configs/nitrogen6x_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/nitrogen6x_defconfig +1 -1
@@ -15,7 +15,7 @@ BR2_TARGET_ROOTFS_EXT2_2r1=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q" BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/7176d07/u-boot-7176d07.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/4034391/u-boot-4034391.tar.gz" # kernel BR2_LINUX_KERNEL=y
Signature · 1 line
1.8.1.2
PATCH 1/4 nitrogen6x: bump U-Boot to latest production version (2013.07)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Eric> Signed-off-by: Eric Nelson <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
In reply to Eric Nelson--- board/boundarydevices/nitrogen6x/6q_bootscript | Bin 455 -> 0 bytes board/boundarydevices/nitrogen6x/6q_upgrade | Bin 1587 -> 0 bytes board/boundarydevices/nitrogen6x/6x_bootscript | Bin 0 -> 1653 bytes board/boundarydevices/nitrogen6x/6x_upgrade | Bin 0 -> 1744 bytes board/boundarydevices/nitrogen6x/post-build.sh | 14 ++++++++------ 5 files changed, 8 insertions(+), 6 deletions(-) delete mode 100644 board/boundarydevices/nitrogen6x/6q_bootscript delete mode 100644 board/boundarydevices/nitrogen6x/6q_upgrade create mode 100644 board/boundarydevices/nitrogen6x/6x_bootscript create mode 100644 board/boundarydevices/nitrogen6x/6x_upgrade
board/boundarydevices/nitrogen6x/6q_bootscript deleted binary +0 -0
board/boundarydevices/nitrogen6x/6q_upgrade deleted binary +0 -0
board/boundarydevices/nitrogen6x/6x_bootscript new file binary +0 -0
zf+HWq5AYGJ9Xn}4p+dR9Ue at -^zMc0x^IjZ2zy0##+xXE<@ZLTdD5uXv#<8S;X$+E zOQ|3WQkJMXw6izc#fJ<PiWwB?G#zJvg8Cfq?kQ7uu?*3ZQDjs}0&^8e0c2npEP_cG zvk(;wKuu5>tz9T<4LZ|#(u?yT@~uUMvOEoO<o#W<Mv7Z+9jhmJz}%SySY4byKB72 zk1+<b+&s5GG6$<ro}^G$WYrI^z%h_#XtXexNHE*w0wLl3#pnuRDVUO}hKQKv;0B<J z0JmUMyd<gg5lBwDdy(RyZ(m=WwLe}CD>}Vi&uHmO6lMxcVnQ1~L0xpMUoGGkVTY82 zSDdyptVNl*v~Zr(uB(JU&_>Ma%-q5ki(FoX%@)wiP+<@2!YK+-}|@5C8JND@$GM zpH=DZsY(#q=hwqw@*j&?$XF@@}8(C~kxx_4H6eXRRh;JUAM$Aoe{#%nWp$-WY zz!M{<DnF2)W-A(wpGr?FA3)6cI{-D<mf3i*UseFj&tG?0<)NME(5QtI~A%NpHngQ z2&CF23uiP-|67sHsG=r#U|Ne%%@bUjznzo^mlsH0N1IP43#p at zRIXKdsQCz^&5<| zd_E;fc}~y0HiB%)B@Lmjp?F}~bb0E4L-dc+3pxd6=krxe#|TG9rRB$)u&$tV%(rPO TQz+1w7{e4(fgD(I$TWTea_I@(
literal 0
HcmV?d00001
board/boundarydevices/nitrogen6x/6x_upgrade new file binary +0 -0
ztnxV1(IQ- at A_Zk|Gkyn?_g5ulO6+)3q5ihlr?Sz4c2>ty@!2e$@ELvVVrcQRPdsh zRhZ({>(ecc)7Wt<GZfaSG?zj{9GGx^BstAmYRoEUZ;R#7tS)dwMu3xU|54;lU)2* zNeYUA3%I0K3#DNCL_#DL2p2ej=g@~98P8;$mQ++q&=!Tyh0<c9mxzglsl#AWpw}wB zL=|XiwiDv0Yit05PljBkP7Yo66EGV|hY1r6MpB>Q8ij$W;^Bhusua{Nwixk)G#kYY z(Uh*&bW9bL4CT at 8G~~avVP4Ds(2hCOW=^NJ(ws-_#JZr6CJh;3-EYy#eC+%7j$l&j za=4=_o at n1Z%(dmjj*ql*JPZt-2Xa?Qb;5j8}Yg(dXUXgjVv&|QpZjLvI$0@%>?u z%ezl=_ at s{TkjIgv-vT?GQMs{L%UWO!&V=;D){s{I*Vf#OZXE*)H!|=AQC6m?1=R NB^XeVE3=uX{{YL7tK|Ry
literal 0
HcmV?d00001
board/boundarydevices/nitrogen6x/post-build.sh +8 -6
@@ -1,18 +1,20 @@ #!/bin/sh # post-build fixups -# for furthe details, see -# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/ +# for further details, see +# +# http://boundarydevices.com/u-boot-on-i-mx6/ +# TARGET_DIR=$1 IMAGES_DIR=$1/../images BOARD_DIR="$(dirname $0)" # bd u-boot looks for bootscript here -cp $BOARD_DIR/6q_bootscript $TARGET_DIR +cp $BOARD_DIR/6x_bootscript $TARGET_DIR # u-boot / update script for bd upgradeu command -if [ -e $IMAGES_DIR/u-boot.bin ]; +if [ -e $IMAGES_DIR/u-boot.imx ]; then - cp $IMAGES_DIR/u-boot.bin $TARGET_DIR - cp $BOARD_DIR/6q_upgrade $TARGET_DIR + cp $IMAGES_DIR/u-boot.imx $TARGET_DIR + cp $BOARD_DIR/6x_upgrade $TARGET_DIR fi
Signature · 1 line
1.8.1.2
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Hi Eric,
Eric> Signed-off-by: Eric Nelson <[email protected]>
Eric> +++ b/board/boundarydevices/nitrogen6x/post-build.sh
Eric> @@ -1,18 +1,20 @@
Eric> #!/bin/sh
Eric> # post-build fixups
Eric> -# for furthe details, see
Eric> -# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
Eric> +# for further details, see
Eric> +#
Eric> +# http://boundarydevices.com/u-boot-on-i-mx6/
Eric> +#
Eric> TARGET_DIR=$1 Eric> IMAGES_DIR=$1/../images Eric> BOARD_DIR="$(dirname $0)"
Eric> # bd u-boot looks for bootscript here
Eric> -cp $BOARD_DIR/6q_bootscript $TARGET_DIR
Eric> +cp $BOARD_DIR/6x_bootscript $TARGET_DIR
Eric> # u-boot / update script for bd upgradeu command Eric> -if [ -e $IMAGES_DIR/u-boot.bin ];
Eric> +if [ -e $IMAGES_DIR/u-boot.imx ];
Eric> then
Eric> - cp $IMAGES_DIR/u-boot.bin $TARGET_DIR Eric> - cp $BOARD_DIR/6q_upgrade $TARGET_DIR Eric> + cp $IMAGES_DIR/u-boot.imx $TARGET_DIR Eric> + cp $BOARD_DIR/6x_upgrade $TARGET_DIR
Hmm, how is that supposed to work? I don't know the details of the imx6 boot sequence, but:
- We don't currently have an option in the u-boot package to install u-boot.imx to IMAGES_DIR/, so this will never run
- Comparing 6q_upgrade and 6x_upgrade I see we used to write the raw u-boot.bin to offset 0 in the spi flash, and now are writing u-boot.imx (which presumably is u-boot.bin with a freescale header) to offset 1K. I see that the .imx file is 4K bigger than the .bin file, so that's presumably the size of the freescale header.
I'll go and add a option for u-boot.imx to the u-boot package, but would like to hear if 6x_upgrade is doing the right thing here.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
Hi Peter,
Quoted 37 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Hi Eric,
Eric> Signed-off-by: Eric Nelson <[email protected]>
Eric> +++
b/board/boundarydevices/nitrogen6x/post-build.sh
Eric> @@ -1,18 +1,20 @@
Eric> #!/bin/sh
Eric> # post-build fixups
Eric> -# for furthe details, see
Eric> -# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
Eric> +# for further details, see
Eric> +#
Eric> +# http://boundarydevices.com/u-boot-on-i-mx6/
Eric> +#Eric> TARGET_DIR=$1 Eric> IMAGES_DIR=$1/../images Eric> BOARD_DIR="$(dirname $0)"Eric> # bd u-boot looks for bootscript here
Eric> -cp $BOARD_DIR/6q_bootscript $TARGET_DIR
Eric> +cp $BOARD_DIR/6x_bootscript $TARGET_DIREric> # u-boot / update script for bd upgradeu command Eric> -if [ -e $IMAGES_DIR/u-boot.bin ]; Eric> +if [ -e $IMAGES_DIR/u-boot.imx ]; Eric> then Eric> - cp $IMAGES_DIR/u-boot.bin $TARGET_DIR Eric> - cp $BOARD_DIR/6q_upgrade $TARGET_DIR Eric> + cp $IMAGES_DIR/u-boot.imx $TARGET_DIR Eric> + cp $BOARD_DIR/6x_upgrade $TARGET_DIRHmm, how is that supposed to work? I don't know the details of the imx6 boot sequence, but:
Quoted 9 lines
- We don't currently have an option in the u-boot package to install u-boot.imx to IMAGES_DIR/, so this will never run
- Comparing 6q_upgrade and 6x_upgrade I see we used to write the raw u-boot.bin to offset 0 in the spi flash, and now are writing u-boot.imx (which presumably is u-boot.bin with a freescale header) to offset 1K. I see that the .imx file is 4K bigger than the .bin file, so that's presumably the size of the freescale header.
The switch from "u-boot.bin" to "u-boot.imx" occurred when we switched from using a Freescale-derived U-Boot 2009.08 to main-line U-Boot sources (currently 2013.07).
Details in this post:
http://boundarydevices.com/switching-u-boot-versions-on-i-mx6/
Quoted 3 lines
I'll go and add a option for u-boot.imx to the u-boot package, but would like to hear if 6x_upgrade is doing the right thing here.
A short description of the change is that Freescale's build process generated u-boot.bin with 512 bytes of padding at the beginning, while main-line U-Boot generates u-boot.imx without the padding.
There are also a handful of discrepancies in the syntax for various commands between the two versions, especially in the areas of SPI NOR (sf probe command), which prompted us to switch the name of the upgrade script (6q_upgrade == old/6x_upgrade == new) when switching to main-line based code.
Note that unlike many ARM-based boards out there, our devices boot to SPI-NOR, so building U-Boot is a convenience. It's not needed to build an SD card image and the choice of when to upgrade should largely be based on the need for features or bug fixes and not tied to each userspace build.
The 6x_bootscript is required though, and provides the distribution- specifics of how/where to load kernel, DTS file, ram disk, et cetera.
Regards,
Eric
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Hi Eric,
Quoted 6 lines
Quoted 6 lines
- Comparing 6q_upgrade and 6x_upgrade I see we used to write the raw u-boot.bin to offset 0 in the spi flash, and now are writing u-boot.imx (which presumably is u-boot.bin with a freescale header) to offset 1K. I see that the .imx file is 4K bigger than the .bin file, so that's presumably the size of the freescale header.
Eric> The switch from "u-boot.bin" to "u-boot.imx" occurred when we Eric> switched from using a Freescale-derived U-Boot 2009.08 to Eric> main-line U-Boot sources (currently 2013.07).
Ahh, I guess the confusion comes from the fact that I missed the change to u-boot.imx when I updated the u-boot version back in April:
http://git.buildroot.net/buildroot/commit/configs/nitrogen6x_defconfig?id=184850a4239c967742
Eric> Details in this post:
Eric> http://boundarydevices.com/switching-u-boot-versions-on-i-mx6/
Quoted 3 lines
Quoted 3 lines
I'll go and add a option for u-boot.imx to the u-boot package, but would like to hear if 6x_upgrade is doing the right thing here.
Eric> A short description of the change is that Freescale's build process Eric> generated u-boot.bin with 512 bytes of padding at the beginning, Eric> while main-line U-Boot generates u-boot.imx without the padding.
I guess you mean 1K of padding to match the new script?
hexdump -C u-boot.bin|head /tmp/boundarydevices-u-boot-2009-08-1f7edab
00000000 c6 01 00 ea 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 d1 00 20 40 20 07 80 27 00 00 00 00 2c 04 80 27 |.. @ ..'....,..'| 00000410 20 04 80 27 00 04 80 27 00 00 00 00 00 00 00 00 | ..'...'........| 00000420 00 00 80 27 74 30 03 00 00 00 00 00 d2 02 f0 40 |...'t0.........@| 00000430 cc 02 ec 04 02 0e 05 a8 00 00 00 30 02 0e 05 b0 |...........0....| 00000440 00 00 00 30 02 0e 05 24 00 00 00 30 02 0e 05 1c |...0...$...0....| 00000450 00 00 00 30 02 0e 05 18 00 00 00 30 02 0e 05 0c |...0.......0....| 00000460 00 00 00 30 02 0e 05 b8 00 00 00 30 02 0e 05 c0 |...0.......0....|
Eric> There are also a handful of discrepancies in the syntax for Eric> various commands between the two versions, especially in the Eric> areas of SPI NOR (sf probe command), which prompted us to switch Eric> the name of the upgrade script (6q_upgrade == old/6x_upgrade == new) Eric> when switching to main-line based code.
Eric> Note that unlike many ARM-based boards out there, our devices boot Eric> to SPI-NOR, so building U-Boot is a convenience. It's not needed Eric> to build an SD card image and the choice of when to upgrade should Eric> largely be based on the need for features or bug fixes and not Eric> tied to each userspace build.
Yes, I know. My nitrogen6x board still runs the original 2009.08 bootloader it was shipped with (which has problems using ext2 rev0 filesystems among others), so I should probably upgrade ;)
Thanks for the info.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
Hi Peter,
Quoted 10 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Hi Eric,
Quoted 6 lines
Quoted 6 lines
- Comparing 6q_upgrade and 6x_upgrade I see we used to write the raw u-boot.bin to offset 0 in the spi flash, and now are writing u-boot.imx (which presumably is u-boot.bin with a freescale header) to offset 1K. I see that the .imx file is 4K bigger than the .bin file, so that's presumably the size of the freescale header.
Quoted 9 lines
Eric> The switch from "u-boot.bin" to "u-boot.imx" occurred when we Eric> switched from using a Freescale-derived U-Boot 2009.08 to Eric> main-line U-Boot sources (currently 2013.07).
Ahh, I guess the confusion comes from the fact that I missed the change to u-boot.imx when I updated the u-boot version back in April:
http://git.buildroot.net/buildroot/commit/configs/nitrogen6x_defconfig?id=184850a4239c967742
I'll try to post updates to the ML with each quarterly release.
The next upgrade will be 2013-10, that I hope enables USB OTG support.
Quoted 14 lines
Eric> Details in this post:
Eric> http://boundarydevices.com/switching-u-boot-versions-on-i-mx6/Quoted 3 lines
Quoted 3 lines
I'll go and add a option for u-boot.imx to the u-boot package, but would like to hear if 6x_upgrade is doing the right thing here.
Eric> A short description of the change is that Freescale's build process Eric> generated u-boot.bin with 512 bytes of padding at the beginning, Eric> while main-line U-Boot generates u-boot.imx without the padding.
I guess you mean 1K of padding to match the new script?
hexdump -C u-boot.bin|head
/tmp/boundarydevices-u-boot-2009-08-1f7edab
Quoted 11 lines
00000000 c6 01 00 ea 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 d1 00 20 40 20 07 80 27 00 00 00 00 2c 04 80 27 |.. @ ..'....,..'| 00000410 20 04 80 27 00 04 80 27 00 00 00 00 00 00 00 00 | ..'...'........| 00000420 00 00 80 27 74 30 03 00 00 00 00 00 d2 02 f0 40 |...'t0.........@| 00000430 cc 02 ec 04 02 0e 05 a8 00 00 00 30 02 0e 05 b0 |...........0....| 00000440 00 00 00 30 02 0e 05 24 00 00 00 30 02 0e 05 1c |...0...$...0....| 00000450 00 00 00 30 02 0e 05 18 00 00 00 30 02 0e 05 0c |...0.......0....| 00000460 00 00 00 30 02 0e 05 b8 00 00 00 30 02 0e 05 c0 |...0.......0....|
Yep. 1k (0x400)
Quoted 13 lines
Eric> There are also a handful of discrepancies in the syntax for Eric> various commands between the two versions, especially in the Eric> areas of SPI NOR (sf probe command), which prompted us to switch Eric> the name of the upgrade script (6q_upgrade == old/6x_upgrade == new) Eric> when switching to main-line based code.
Eric> Note that unlike many ARM-based boards out there, our devices boot Eric> to SPI-NOR, so building U-Boot is a convenience. It's not needed Eric> to build an SD card image and the choice of when to upgrade should Eric> largely be based on the need for features or bug fixes and not Eric> tied to each userspace build.
Quoted 4 lines
Yes, I know. My nitrogen6x board still runs the original 2009.08 bootloader it was shipped with (which has problems using ext2 rev0 filesystems among others), so I should probably upgrade ;)
Upgrading is definitely recommended.
The other notable enhancements are display support and support for SATA.
Regards,
Eric
PATCH 2/4 nitrogen6x: use 6x_bootscript/6x_upgrade instead of older 6q_ versions
In reply to Eric NelsonQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Eric> Signed-off-by: Eric Nelson <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 3/4 nitrogen6x: bump kernel to latest version (3.0.35-4.1.0)
In reply to Eric Nelson--- configs/nitrogen6x_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/nitrogen6x_defconfig +1 -1
@@ -20,6 +20,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-bo # kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/linux-imx6/tarball/2dc5560/linux-imx6-2dc5560.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/linux-imx6/tarball/5809938/linux-imx6-5809938.tar.gz BR2_LINUX_KERNEL_DEFCONFIG="nitrogen6x" BR2_LINUX_KERNEL_INSTALL_TARGET=y
Signature · 1 line
1.8.1.2
PATCH 3/4 nitrogen6x: bump kernel to latest version (3.0.35-4.1.0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Eric> Signed-off-by: Eric Nelson <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
In reply to Eric NelsonThis patchset updates the Freescale gstreamer and GPU libraries to the latest release (3.0.35_4.1.0).
Note that the package names refer to and are compatible with an alpha release of kernel version 3.5.7.
The primary release package (based on LTIB) is available here and includes documentation.
https://community.freescale.com/docs/DOC-95560
The 3.5.7 kernel sources are available here:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/log/?h=imx_3.5.7_1.0.0_alpha
--- package/freescale-imx/freescale-imx.mk | 4 ++-- .../gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk | 8 +++++--- package/freescale-imx/imx-lib/imx-lib.mk | 11 ++++++++++- .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk | 4 ++-- package/libfslcodec/libfslcodec.mk | 4 ++-- package/libfslparser/libfslparser.mk | 8 +++++--- package/libfslvpuwrap/libfslvpuwrap.mk | 22 ++++++++++++++++++++-- 7 files changed, 46 insertions(+), 15 deletions(-)
package/freescale-imx/freescale-imx.mk +2 -2
@@ -4,9 +4,9 @@ # ################################################################################ -FREESCALE_IMX_VERSION = 1.1.0 +FREESCALE_IMX_VERSION = 3.5.7-1.0.0 # No official download site from freescale, just this mirror -FREESCALE_IMX_MIRROR_SITE = http://download.ossystems.com.br/bsp/freescale/source +FREESCALE_IMX_MIRROR_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/ include $(sort $(wildcard package/freescale-imx/*/*.mk))
package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk +5 -3
@@ -3,8 +3,12 @@ # gpu-viv-bin-mx6q # ################################################################################ +ifeq ($(BR2_ARM_EABIHF),y) +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-hfp +else +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-sfp +endif -GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION) GPU_VIV_BIN_MX6Q_SITE = $(FREESCALE_IMX_MIRROR_SITE) GPU_VIV_BIN_MX6Q_SOURCE = gpu-viv-bin-mx6q-$(GPU_VIV_BIN_MX6Q_VERSION).bin
@@ -30,8 +34,6 @@ endif # The archive is a shell-self-extractor of a bzipped tar. It happens # to extract in the correct directory (gpu-viv-bin-mx6q-x.y.z) # The --force makes sure it doesn't fail if the source dir already exists. -# The --auto-accept skips the license check - not needed for us -# because we have legal-info. define GPU_VIV_BIN_MX6Q_EXTRACT_CMDS (cd $(BUILD_DIR); \ sh $(DL_DIR)/$(GPU_VIV_BIN_MX6Q_SOURCE) --force --auto-accept)
package/freescale-imx/imx-lib/imx-lib.mk +10 -1
@@ -6,7 +6,8 @@ IMX_LIB_VERSION = $(FREESCALE_IMX_VERSION) IMX_LIB_SITE = $(FREESCALE_IMX_MIRROR_SITE) -IMX_LIB_LICENSE = LGPLv2.1+ +IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin +IMX_LIB_LICENSE = Freescale Semiconductor Software License Agreement # No license file included IMX_LIB_INSTALL_STAGING = YES
@@ -25,6 +26,14 @@ IMX_LIB_MAKE_ENV = \ PLATFORM=$(BR2_PACKAGE_IMX_LIB_PLATFORM) \ INCLUDE="$(IMX_LIB_INCLUDE)" +# The archive is a shell-self-extractor of a bzipped tar. It happens +# to extract in the correct directory (imx-lib-x.y.z) +# The --force makes sure it doesn't fail if the source dir already exists. +define IMX_LIB_EXTRACT_CMDS + (cd $(BUILD_DIR); \ + sh $(DL_DIR)/$(IMX_LIB_SOURCE) --force --auto-accept) +endef + define IMX_LIB_BUILD_CMDS $(IMX_LIB_MAKE_ENV) $(MAKE1) -C $(@D) endef
package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk +2 -2
@@ -4,9 +4,9 @@ # ################################################################################ -GST_FSL_PLUGINS_VERSION = 3.0.1 +GST_FSL_PLUGINS_VERSION = 3.5.7-1.0.0 # No official download site from freescale, just this mirror -GST_FSL_PLUGINS_SITE = http://download.ossystems.com.br/bsp/freescale/source +GST_FSL_PLUGINS_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/ # Most is LGPLv2+, but some sources are copied from upstream and are # LGPLv2.1+, which essentially makes it LGPLv2.1+
package/libfslcodec/libfslcodec.mk +2 -2
@@ -4,9 +4,9 @@ # ################################################################################ -LIBFSLCODEC_VERSION = 3.0.1 +LIBFSLCODEC_VERSION = 3.5.7-1.0.0 # No official download site from freescale, just this mirror -LIBFSLCODEC_SITE = http://download.ossystems.com.br/bsp/freescale/source +LIBFSLCODEC_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/ LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers) LIBFSLCODEC_LICENSE_FILES = EULA EULA.txt
package/libfslparser/libfslparser.mk +5 -3
@@ -4,9 +4,9 @@ # ################################################################################ -LIBFSLPARSER_VERSION = 3.0.1 +LIBFSLPARSER_VERSION = 3.5.7-1.0.0 # No official download site from freescale, just this mirror -LIBFSLPARSER_SITE = http://download.ossystems.com.br/bsp/freescale/source +LIBFSLPARSER_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/ LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement LIBFSLPARSER_LICENSE_FILES = EULA EULA.txt
@@ -31,7 +31,9 @@ define LIBFSLPARSER_EXTRACT_CMDS /<<EOEULA/ { start=1; }'\ $(DL_DIR)/$(LIBFSLPARSER_SOURCE) > $(@D)/EULA cd $(BUILD_DIR); \ - sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept + sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept ; \ + cd libfslparser-3.5.7-1.0.0; \ + pwd && sh ./autogen.sh endef # The Makefile installs several versions of the libraries, but we only
package/libfslvpuwrap/libfslvpuwrap.mk +20 -2
@@ -4,9 +4,10 @@ # ################################################################################ -LIBFSLVPUWRAP_VERSION = 1.0.17 +LIBFSLVPUWRAP_VERSION = 3.5.7-1.0.0 # No official download site from freescale, just this mirror -LIBFSLVPUWRAP_SITE = http://download.ossystems.com.br/bsp/freescale/source +LIBFSLVPUWRAP_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/ +LIBFSLVPUWRAP_SOURCE = libfslvpuwrap-$(LIBFSLVPUWRAP_VERSION).bin LIBFSLVPUWRAP_LICENSE = Freescale Semiconductor Software License Agreement LIBFSLVPUWRAP_LICENSE_FILES = EULA.txt LIBFSLVPUWRAP_REDISTRIBUTE = NO
@@ -15,4 +16,21 @@ LIBFSLVPUWRAP_INSTALL_STAGING = YES LIBFSLVPUWRAP_DEPENDENCIES += imx-lib +# The archive is a shell-self-extractor of a bzipped tar. It happens +# to extract in the correct directory (libfslvpuwrap-x.y.z) +# The --force makes sure it doesn't fail if the source dir already exists. +# The --auto-accept skips the license check - not needed for us +# because we have legal-info +# Since the EULA in the bin file differs from the one in the tar file, +# extract the one from the bin file as well. +define LIBFSLVPUWRAP_EXTRACT_CMDS + awk 'BEGIN { start=0; } \ + /^EOEULA/ { start = 0; } \ + { if (start) print; } \ + /<<EOEULA/ { start=1; }'\ + $(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE) > $(@D)/EULA + cd $(BUILD_DIR); \ + sh $(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE) --force --auto-accept +endef + $(eval $(autotools-package))
Signature · 1 line
1.8.1.2
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Eric> This patchset updates the Freescale gstreamer and GPU libraries Eric> to the latest release (3.0.35_4.1.0).
Eric> Note that the package names refer to and are compatible with Eric> an alpha release of kernel version 3.5.7.
Eric> The primary release package (based on LTIB) is available Eric> here and includes documentation.
Eric> https://community.freescale.com/docs/DOC-95560
Eric> The 3.5.7 kernel sources are available here:
Eric> http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/log/?h=imx_3.5.7_1.0.0_alpha
Eric> # No official download site from freescale, just this mirror
Eric> -FREESCALE_IMX_MIRROR_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +FREESCALE_IMX_MIRROR_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
That sounds pretty official to me, so the comment should probably go and the variable perhaps renamed to FREESCALE_IMX_SITE?
The page btw seems to be down at the moment as I just get:
The system is currently unavailable.
Please accept our apologies for any inconvenience this may cause. Feel free to contact our Technical Helpline at one of the following numbers:
...
Eric> +++ b/package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk Eric> @@ -3,8 +3,12 @@
Eric> # gpu-viv-bin-mx6q Eric> # Eric> ################################################################################
Eric> +ifeq ($(BR2_ARM_EABIHF),y)
Eric> +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-hfp Eric> +else
Eric> +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-sfp Eric> +endif
NIT: There should be an empty line after the ##### line.
Eric> -GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)
Eric> GPU_VIV_BIN_MX6Q_SITE = $(FREESCALE_IMX_MIRROR_SITE) Eric> GPU_VIV_BIN_MX6Q_SOURCE = gpu-viv-bin-mx6q-$(GPU_VIV_BIN_MX6Q_VERSION).bin
Eric> @@ -30,8 +34,6 @@ endif
Eric> # The archive is a shell-self-extractor of a bzipped tar. It happens Eric> # to extract in the correct directory (gpu-viv-bin-mx6q-x.y.z) Eric> # The --force makes sure it doesn't fail if the source dir already exists. Eric> -# The --auto-accept skips the license check - not needed for us Eric> -# because we have legal-info. Eric> define GPU_VIV_BIN_MX6Q_EXTRACT_CMDS Eric> (cd $(BUILD_DIR); \ Eric> sh $(DL_DIR)/$(GPU_VIV_BIN_MX6Q_SOURCE) --force --auto-accept)
Did you remove this on purpose? If the --auto-accept option is gone then it should also be removed from here.
Eric> diff --git a/package/freescale-imx/imx-lib/imx-lib.mk b/package/freescale-imx/imx-lib/imx-lib.mk Eric> index bd7e174..e3c29b1 100644
Eric> --- a/package/freescale-imx/imx-lib/imx-lib.mk
Eric> +++ b/package/freescale-imx/imx-lib/imx-lib.mk
Eric> @@ -6,7 +6,8 @@
Eric> IMX_LIB_VERSION = $(FREESCALE_IMX_VERSION)
Eric> IMX_LIB_SITE = $(FREESCALE_IMX_MIRROR_SITE)
Eric> -IMX_LIB_LICENSE = LGPLv2.1+
Eric> +IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin
Eric> +IMX_LIB_LICENSE = Freescale Semiconductor Software License Agreement Eric> # No license file included
Sigh, back to self extracting binaries? :/
Eric> IMX_LIB_INSTALL_STAGING = YES
Eric> @@ -25,6 +26,14 @@ IMX_LIB_MAKE_ENV = \
Eric> PLATFORM=$(BR2_PACKAGE_IMX_LIB_PLATFORM) \
Eric> INCLUDE="$(IMX_LIB_INCLUDE)"
Eric> +# The archive is a shell-self-extractor of a bzipped tar. It happens Eric> +# to extract in the correct directory (imx-lib-x.y.z)
Eric> +# The --force makes sure it doesn't fail if the source dir already exists. Eric> +define IMX_LIB_EXTRACT_CMDS
Eric> + (cd $(BUILD_DIR); \
Eric> + sh $(DL_DIR)/$(IMX_LIB_SOURCE) --force --auto-accept)
Eric> +endef
Does it have an --auto-accept option? If so, please document it, if not remove it here.
Eric> +++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################
Eric> -GST_FSL_PLUGINS_VERSION = 3.0.1
Eric> +GST_FSL_PLUGINS_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -GST_FSL_PLUGINS_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +GST_FSL_PLUGINS_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Is this still for gstreamer 0.10?
Eric> +++ b/package/libfslcodec/libfslcodec.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################
Eric> -LIBFSLCODEC_VERSION = 3.0.1
Eric> +LIBFSLCODEC_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLCODEC_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLCODEC_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Maybe this should use FREESCALE_IMX_SITE
Eric> LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin Eric> LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers) Eric> LIBFSLCODEC_LICENSE_FILES = EULA EULA.txt
Eric> diff --git a/package/libfslparser/libfslparser.mk b/package/libfslparser/libfslparser.mk Eric> index 3e27a6a..66068fe 100644
Eric> --- a/package/libfslparser/libfslparser.mk
Eric> +++ b/package/libfslparser/libfslparser.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################
Eric> -LIBFSLPARSER_VERSION = 3.0.1
Eric> +LIBFSLPARSER_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLPARSER_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLPARSER_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Same here (and comment dropped).
Eric> LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin
Eric> LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement
Eric> LIBFSLPARSER_LICENSE_FILES = EULA EULA.txt
Eric> @@ -31,7 +31,9 @@ define LIBFSLPARSER_EXTRACT_CMDS
Eric> /<<EOEULA/ { start=1; }'\
Eric> $(DL_DIR)/$(LIBFSLPARSER_SOURCE) > $(@D)/EULA
Eric> cd $(BUILD_DIR); \ Eric> - sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept
Eric> + sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept ; \
Eric> + cd libfslparser-3.5.7-1.0.0; \
Eric> + pwd && sh ./autogen.sh
Eric> endef
Why the pwd?
We do have generic autoreconf support in Buildroot. Normally you can just set:
LIBFSLPARSERS_AUTORECONF = YES
And Buildroot will take care of building the proper auto* packages for the host and running autoreconf.
Eric> +++ b/package/libfslvpuwrap/libfslvpuwrap.mk
Eric> @@ -4,9 +4,10 @@
Eric> #
Eric> ################################################################################
Eric> -LIBFSLVPUWRAP_VERSION = 1.0.17
Eric> +LIBFSLVPUWRAP_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLVPUWRAP_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLVPUWRAP_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Same comment as elsewhere.
Care to fix these issues and resubmit? Thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
Hi Peter,
Quoted 12 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
Eric> This patchset updates the Freescale gstreamer and GPU libraries Eric> to the latest release (3.0.35_4.1.0).
Eric> Note that the package names refer to and are compatible with Eric> an alpha release of kernel version 3.5.7.
Eric> The primary release package (based on LTIB) is available Eric> here and includes documentation.
Eric> https://community.freescale.com/docs/DOC-95560
Quoted 8 lines
Eric> The 3.5.7 kernel sources are available here:
Eric> http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/log/?h=imx_3.5.7_1.0.0_alphaEric> # No official download site from freescale, just this mirror
Eric> -FREESCALE_IMX_MIRROR_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +FREESCALE_IMX_MIRROR_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
OT: How do you get this nifty formatting? It's about time for me to retire my crusty Mozilla Thunderbird...
Quoted 10 lines
That sounds pretty official to me, so the comment should probably go and the variable perhaps renamed to
FREESCALE_IMX_SITE?The page btw seems to be down at the moment as I just get:
The system is currently unavailable.Please accept our apologies for any inconvenience this may cause. Feel free to contact our Technical Helpline at one of the following numbers:
...
There's no page at http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/.
This is simply the repository used to feed packages to the Yocto project, with a mirror at O.S. Systems:
https://github.com/Freescale/meta-fsl-arm/blob/master/conf/layer.conf#L14
Quoted 12 lines
Eric> +++ b/package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk Eric> @@ -3,8 +3,12 @@ Eric> # gpu-viv-bin-mx6q Eric> # Eric> ################################################################################ Eric> +ifeq ($(BR2_ARM_EABIHF),y) Eric> +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-hfp Eric> +else Eric> +GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-sfp Eric> +endif
Quoted 2 lines
NIT: There should be an empty line after the ##### line.
Ok.
Quoted 14 lines
Eric> -GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION) Eric> GPU_VIV_BIN_MX6Q_SITE = $(FREESCALE_IMX_MIRROR_SITE) Eric> GPU_VIV_BIN_MX6Q_SOURCE = gpu-viv-bin-mx6q-$(GPU_VIV_BIN_MX6Q_VERSION).binEric> @@ -30,8 +34,6 @@ endif
Eric> # The archive is a shell-self-extractor of a bzipped tar. It happens Eric> # to extract in the correct directory (gpu-viv-bin-mx6q-x.y.z) Eric> # The --force makes sure it doesn't fail if the source dir already exists. Eric> -# The --auto-accept skips the license check - not needed for us Eric> -# because we have legal-info. Eric> define GPU_VIV_BIN_MX6Q_EXTRACT_CMDS Eric> (cd $(BUILD_DIR); \ Eric> sh $(DL_DIR)/$(GPU_VIV_BIN_MX6Q_SOURCE) --force --auto-accept)
Quoted 3 lines
Did you remove this on purpose? If the --auto-accept option is gone then it should also be removed from here.
I actually meant to, but hadn't yet started a discussion on the topic.
We should be able to get rid of these comments:
http://git.buildroot.net/buildroot/tree/package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk#n15
By following the lead of the meta-fsl-arm project and allowing the first of any packages with the Freescale EULA to prompt the user for acceptance, but I'm not sure how to accomplish that.
In the Yocto world, a tag ("ACCEPT_FREESCALE_EULA") placed in local.conf is sufficient to bypass the prompt, which requires action by the user.
Quoted 14 lines
Eric> diff --git a/package/freescale-imx/imx-lib/imx-lib.mk b/package/freescale-imx/imx-lib/imx-lib.mk Eric> index bd7e174..e3c29b1 100644 Eric> --- a/package/freescale-imx/imx-lib/imx-lib.mk Eric> +++ b/package/freescale-imx/imx-lib/imx-lib.mk Eric> @@ -6,7 +6,8 @@ Eric> IMX_LIB_VERSION = $(FREESCALE_IMX_VERSION) Eric> IMX_LIB_SITE = $(FREESCALE_IMX_MIRROR_SITE) Eric> -IMX_LIB_LICENSE = LGPLv2.1+ Eric> +IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin Eric> +IMX_LIB_LICENSE = Freescale Semiconductor Software License Agreement Eric> # No license file included
Quoted 2 lines
Sigh, back to self extracting binaries? :/
Yep. The tar-balls are gone. This one (imx-lib) is a bit misleading, since the extracted files say very clearly that all of the components are released under LGPL.
I think somebody in the packaging department was in the "EULA zone"...
Quoted 14 lines
Eric> IMX_LIB_INSTALL_STAGING = YES Eric> @@ -25,6 +26,14 @@ IMX_LIB_MAKE_ENV = \ Eric> PLATFORM=$(BR2_PACKAGE_IMX_LIB_PLATFORM) \ Eric> INCLUDE="$(IMX_LIB_INCLUDE)"Eric> +# The archive is a shell-self-extractor of a bzipped tar. It happens Eric> +# to extract in the correct directory (imx-lib-x.y.z)
Eric> +# The --force makes sure it doesn't fail if the source dir already exists. Eric> +defineIMX_LIB_EXTRACT_CMDS
Eric> + (cd $(BUILD_DIR); \
Eric> + sh $(DL_DIR)/$(IMX_LIB_SOURCE) --force --auto-accept)
Eric> +endef
Quoted 3 lines
Does it have an --auto-accept option? If so, please document it, if not remove it here.
Okay, will do.
Quoted 5 lines
Eric> +++
b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################
Quoted 8 lines
Eric> -GST_FSL_PLUGINS_VERSION = 3.0.1
Eric> +GST_FSL_PLUGINS_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -GST_FSL_PLUGINS_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +GST_FSL_PLUGINS_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/Is this still for gstreamer 0.10?
Yes, but version "1.0.0" of the "3.5.7" package and to make things even more confusing, this is the binary that matches up with kernel version 3.0.35_4.1.0....
Have you noticed how the Freescale packages often name things "MXC-something"... I think the "MXC" stands for "Mobile eXtreme Confusion"...
Quoted 6 lines
Eric> +++
b/package/libfslcodec/libfslcodec.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################
Quoted 8 lines
Eric> -LIBFSLCODEC_VERSION = 3.0.1
Eric> +LIBFSLCODEC_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLCODEC_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLCODEC_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/Maybe this should use
FREESCALE_IMX_SITE
Agreed. I'm also confused about why this isn't in the freescale-imx/ directory.
Quoted 28 lines
Eric> LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin Eric> LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers) Eric> LIBFSLCODEC_LICENSE_FILES = EULA EULA.txtEric> diff --git
a/package/libfslparser/libfslparser.mkb/package/libfslparser/libfslparser.mkEric> index 3e27a6a..66068fe 100644
Eric> ---a/package/libfslparser/libfslparser.mk
Eric> +++b/package/libfslparser/libfslparser.mk
Eric> @@ -4,9 +4,9 @@
Eric> #
Eric> ################################################################################Eric> -LIBFSLPARSER_VERSION = 3.0.1
Eric> +LIBFSLPARSER_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLPARSER_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLPARSER_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/Same here (and comment dropped).
Eric> LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin Eric> LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement Eric> LIBFSLPARSER_LICENSE_FILES = EULA EULA.txt Eric> @@ -31,7 +31,9 @@ define LIBFSLPARSER_EXTRACT_CMDS Eric> /<<EOEULA/ { start=1; }'\ Eric> $(DL_DIR)/$(LIBFSLPARSER_SOURCE) > $(@D)/EULA Eric> cd $(BUILD_DIR); \
Quoted 8 lines
Eric> - sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept
Eric> + sh $(DL_DIR)/$(LIBFSLPARSER_SOURCE) --force --auto-accept ; \
Eric> + cd libfslparser-3.5.7-1.0.0; \
Eric> + pwd && sh ./autogen.sh
Eric> endefWhy the pwd?
'Cause I was debugging ;)
Quoted 8 lines
We do have generic autoreconf support in Buildroot. Normally you can just set:
LIBFSLPARSERS_AUTORECONF= YESAnd Buildroot will take care of building the proper auto* packages for the host and running autoreconf.
Thanks for the tip. I'll re-try with that bit.
Quoted 12 lines
Eric> +++
b/package/libfslvpuwrap/libfslvpuwrap.mk
Eric> @@ -4,9 +4,10 @@
Eric> #
Eric> ################################################################################Eric> -LIBFSLVPUWRAP_VERSION = 1.0.17
Eric> +LIBFSLVPUWRAP_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLVPUWRAP_SITE = http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLVPUWRAP_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Quoted 4 lines
Same comment as elsewhere.
Care to fix these issues and resubmit? Thanks.
Will do.
Regards,
Eric
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
Quoted 4 lines · Eric Nelson
Hi Peter,
Quoted 1 line · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
[snip]
Quoted 19 lines
Quoted 4 lines
Eric> @@ -30,8 +34,6 @@ endif
Eric> # The archive is a shell-self-extractor of a bzipped tar. It happens Eric> # to extract in the correct directory (gpu-viv-bin-mx6q-x.y.z) Eric> # The --force makes sure it doesn't fail if the source dir already exists.Quoted 9 lines
Eric> -# The --auto-accept skips the license check - not needed for us Eric> -# because we have legal-info.
Eric> defineGPU_VIV_BIN_MX6Q_EXTRACT_CMDS
Eric> (cd $(BUILD_DIR); \
Eric> sh $(DL_DIR)/$(GPU_VIV_BIN_MX6Q_SOURCE) --force --auto-accept)Did you remove this on purpose? If the --auto-accept option is gone then it should also be removed from here.
I actually meant to, but hadn't yet started a discussion on the topic.
We should be able to get rid of these comments:
http://git.buildroot.net/buildroot/tree/package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk#n15
Quoted 6 lines
By following the lead of the meta-fsl-arm project and allowing the first of any packages with the Freescale EULA to prompt the user for acceptance, but I'm not sure how to accomplish that.
In the Yocto world, a tag ("
ACCEPT_FREESCALE_EULA") placed in local.conf is sufficient to bypass the prompt, which requires action by the user.
We prefer to avoid that the build stops after half an hour or so
because it is waiting for user input. Also, I don't see a reason why we have to explicitly ask the user to accept this license. If we do that, we should probably do the same for all the other packages.
If we do want explicit acceptance, then it can be done similar to the
Qt license, i.e. add a config option that enables the --auto-accept.
Quoted 17 lines
Quoted 17 lines
Eric> diff --git
a/package/freescale-imx/imx-lib/imx-lib.mkb/package/freescale-imx/imx-lib/imx-lib.mk
Eric> index bd7e174..e3c29b1 100644
Eric> ---a/package/freescale-imx/imx-lib/imx-lib.mkEric> +++b/package/freescale-imx/imx-lib/imx-lib.mkEric> @@ -6,7 +6,8 @@Eric>
IMX_LIB_VERSION= $(FREESCALE_IMX_VERSION)
Eric>IMX_LIB_SITE= $(FREESCALE_IMX_MIRROR_SITE)
Eric> -IMX_LIB_LICENSE = LGPLv2.1+
Eric> +IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin Eric> +IMX_LIB_LICENSE = Freescale Semiconductor Software License
Agreement
Eric> # No license file included
Quoted 6 lines
Quoted 2 lines
Sigh, back to self extracting binaries? :/
Yep. The tar-balls are gone. This one (imx-lib) is a bit misleading, since the extracted files say very clearly that all of the components are released under LGPL.
In that case, the license is still LGPL. The EULA text specifies:
This Agreement does not concern your use of any files that are subject to an "open source" software license, such as the Free Software Foundation "General Public License," or "GNU GPL."
Since only GPL stuff is included in imx-lib, the rest of the EULA
essentially doesn't apply.
[snip]
Quoted 8 lines
Quoted 8 lines
Eric> -LIBFSLCODEC_VERSION = 3.0.1
Eric> +LIBFSLCODEC_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLCODEC_SITE =
http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLCODEC_SITE =
http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Quoted 5 lines
Quoted 2 lines
Maybe this should use
FREESCALE_IMX_SITEAgreed. I'm also confused about why this isn't in the freescale-imx/ directory.
Because the libfslcodec fits in the multimedia libraries menu more than
in the hardware handling menu.
Note that it is not necessary to put the libfslcodec package under the
freescale-imx directory for it to use the FREESCALE_IMX_SITE variable. At least, I think so :-)
Regards,
Arnout
[snip]
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
Hi Arnout,
Quoted 37 lines · Arnout Vandecappelle
Quoted 4 lines · Eric Nelson
Hi Peter,
Quoted 1 line · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Eric" == Eric Nelson <[email protected]> writes:
[snip]
Quoted 24 lines
Quoted 13 lines
Eric> @@ -30,8 +34,6 @@ endif
Eric> # The archive is a shell-self-extractor of a bzipped tar. It
happens
Eric> # to extract in the correct directory (gpu-viv-bin-mx6q-x.y.z) Eric> # The --force makes sure it doesn't fail if the source dir
already exists.
Eric> -# The --auto-accept skips the license check - not needed for us Eric> -# because we have legal-info.
Eric> defineGPU_VIV_BIN_MX6Q_EXTRACT_CMDS
Eric> (cd $(BUILD_DIR); \
Eric> sh $(DL_DIR)/$(GPU_VIV_BIN_MX6Q_SOURCE) --force
--auto-accept)Quoted 3 lines
Did you remove this on purpose? If the --auto-accept option is gone then it should also be removed from here.
I actually meant to, but hadn't yet started a discussion on the topic.
We should be able to get rid of these comments:
Quoted 6 lines
By following the lead of the meta-fsl-arm project and allowing the first of any packages with the Freescale EULA to prompt the user for acceptance, but I'm not sure how to accomplish that.
In the Yocto world, a tag ("
ACCEPT_FREESCALE_EULA") placed in local.conf is sufficient to bypass the prompt, which requires action by the user.
Quoted 8 lines
We prefer to avoid that the build stops after half an hour or so
because it is waiting for user input. Also, I don't see a reason why we have to explicitly ask the user to accept this license. If we do that, we should probably do the same for all the other packages.If we do want explicit acceptance, then it can be done similar to the
Qt license, i.e. add a config option that enables the --auto-accept.
I'll take a whack at that, but it may take a week or so.
Quoted 24 lines
Quoted 17 lines
Quoted 17 lines
Eric> diff --git
a/package/freescale-imx/imx-lib/imx-lib.mkb/package/freescale-imx/imx-lib/imx-lib.mk
Eric> index bd7e174..e3c29b1 100644
Eric> ---a/package/freescale-imx/imx-lib/imx-lib.mkEric> +++b/package/freescale-imx/imx-lib/imx-lib.mkEric> @@ -6,7 +6,8 @@Eric>
IMX_LIB_VERSION= $(FREESCALE_IMX_VERSION)
Eric>IMX_LIB_SITE= $(FREESCALE_IMX_MIRROR_SITE)
Eric> -IMX_LIB_LICENSE = LGPLv2.1+
Eric> +IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin Eric> +IMX_LIB_LICENSE = Freescale Semiconductor Software License
Agreement
Eric> # No license file includedQuoted 6 lines
Quoted 2 lines
Sigh, back to self extracting binaries? :/
Yep. The tar-balls are gone. This one (imx-lib) is a bit misleading, since the extracted files say very clearly that all of the components are released under LGPL.
Quoted 9 lines
In that case, the license is still LGPL. The EULA text specifies:
This Agreement does not concern your use of any files that are subject to an "open source" software license, such as the Free Software Foundation "General Public License," or "GNU GPL."
Since only GPL stuff is included in imx-lib, the rest of the EULA
essentially doesn't apply.
Right.
Quoted 9 lines
[snip]
Quoted 8 lines
Quoted 8 lines
Eric> -LIBFSLCODEC_VERSION = 3.0.1
Eric> +LIBFSLCODEC_VERSION = 3.5.7-1.0.0
Eric> # No official download site from freescale, just this mirror Eric> -LIBFSLCODEC_SITE =
http://download.ossystems.com.br/bsp/freescale/source
Eric> +LIBFSLCODEC_SITE =
http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
Maybe this should use
FREESCALE_IMX_SITEAgreed. I'm also confused about why this isn't in the freescale-imx/ directory.
Because the libfslcodec fits in the multimedia libraries menu more
than in the hardware handling menu.
I'm not sure. It shows up under Packages/Libraries/Multimedia and I found the packages difficult to locate.
Quoted 4 lines
Note that it is not necessary to put the libfslcodec package under the
freescale-imx directory for it to use theFREESCALE_IMX_SITEvariable. At least, I think so :-)
That variable (currently FREESCALE_IMX_MIRROR_SITE) is defined in the parent makefile:
http://git.buildroot.net/buildroot/tree/package/freescale-imx/freescale-imx.mk
... so it's not appropriate to include from the other tree.
Can you take a look at the more recent patch set? Things seem much cleaner by having this all in the same tree.
Thanks,
Eric
PATCH 4/4 i.MX6: Update Freescale hardware-acceleration bits to latest versions
In reply to Arnout VandecappelleDear Arnout Vandecappelle,
Quoted 7 lines · Arnout Vandecappelle
Quoted 6 lines
By following the lead of the meta-fsl-arm project and allowing the first of any packages with the Freescale EULA to prompt the user for acceptance, but I'm not sure how to accomplish that.
In the Yocto world, a tag ("
ACCEPT_FREESCALE_EULA") placed in local.conf is sufficient to bypass the prompt, which requires action by the user.
Quoted 7 lines
We prefer to avoid that the build stops after half an hour or so
because it is waiting for user input. Also, I don't see a reason why we have to explicitly ask the user to accept this license. If we do that, we should probably do the same for all the other packages.If we do want explicit acceptance, then it can be done similar to the
Qt license, i.e. add a config option that enables the --auto-accept.
Agreed.
Quoted 5 lines
Quoted 2 lines
Agreed. I'm also confused about why this isn't in the freescale-imx/ directory.
Because the libfslcodec fits in the multimedia libraries menu more than
in the hardware handling menu.
I don't quite agree here. The location of the package in the menu has nothing to do with the location of the package .mk file and directory. So if the libfslcodec is downloaded from the same site and with the same version as the other package/freescale-imx/ stuff and therefore re-use the same variables, it could very well be moved under this directory.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com