ARM: tegra: unify Tegra's Kconfig a bit more
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
From: Stephen Warren <[email protected]>
Move all common select clauses from ARCH_TEGRA_*_SOC to ARCH_TEGRA to eliminate duplication. The USB-related selects all should have been common too, but were missing from Tegra114 previously. Move these to ARCH_TEGRA too. The latter fixes a build break when only Tegra114 support was enabled, but not Tegra20 or Tegra30 support.
This is 20984c44b5a08620778ea14fa5807489170fd5ca in v3.12-rc1.
--- arch/arm/mach-tegra/Kconfig | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)
arch/arm/mach-tegra/Kconfig +6 -15
@@ -2,18 +2,24 @@ config ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_GIC select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL select SOC_BUS select SPARSE_IRQ + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY select USE_OF help This enables support for NVIDIA Tegra based systems.
@@ -27,15 +33,9 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_720789 select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA20 select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,14 +44,8 @@ config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -60,10 +54,7 @@ config ARCH_TEGRA_114_SOC bool "Enable support for Tegra114 family" select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 - select ARM_GIC select ARM_L1_CACHE_SHIFT_6 - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA114 help Support for NVIDIA Tegra T114 processor family, based on the
Signature · 1 line
1.8.1.5
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 8 lines · Stephen Warren
From: Stephen Warren <[email protected]>
Move all common select clauses from ARCH_TEGRA_*_SOC to
ARCH_TEGRAto eliminate duplication. The USB-related selects all should have been common too, but were missing from Tegra114 previously. Move these toARCH_TEGRAtoo. The latter fixes a build break when only Tegra114 support was enabled, but not Tegra20 or Tegra30 support.
Quoted 5 lines
This is
20984c44b5a08620778ea14fa5807489170fd5cain v3.12-rc1.Signed-off-by Stephen Warren <[email protected]>Reported-by Paul Walmsley <[email protected]>[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
Quoted 4 lines
Cc stable # v3.11--- arch/arm/mach-tegra/Kconfig | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)
This fails to apply to the 3.11-stable tree, if you want it there, can you provide a version that actually does apply, and that you have tested to work properly?
thanks,
greg k-h
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Hi Greg,
Quoted 3 lines · Greg KH
Quoted 1 line · Stephen Warren
[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
There's an experimental system here that automatically builds and test-boots -stable kernels on some Tegra platforms. The output isn't public yet -- that's planned, but there are still a few bugs left in the test system that would be good to clean up first.
The output is similar to this:
http://nvt.pwsan.com/pub/linux/testlogs/
Will certainly send you a link when it's ready to go.
- Paul
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 8 lines · Paul Walmsley
Hi Greg,
Quoted 3 lines · Greg KH
Quoted 1 line · Stephen Warren
[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
There's an experimental system here that automatically builds and test-boots -stable kernels on some Tegra platforms.
Well, here's a public link for it:
http://nvt.pwsan.com/pub/linux-stable/testlogs/
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
- Paul
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 11 lines · Paul Walmsley
Quoted 8 lines · Paul Walmsley
Hi Greg,
Quoted 3 lines · Greg KH
Quoted 1 line · Stephen Warren
[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
There's an experimental system here that automatically builds and test-boots -stable kernels on some Tegra platforms.
Quoted 8 lines
Well, here's a public link for it:
http://nvt.pwsan.com/pub/linux-stable/testlogs/
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
That's great to see. Testing the -rc stable releases would be great, to find if I break anything, as I don't have Tegra hardware to test them out on.
thanks,
greg k-h
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 16 lines · Greg KH
Quoted 15 lines · Paul Walmsley
Quoted 8 lines · Paul Walmsley
Hi Greg,
Quoted 3 lines · Greg KH
Quoted 1 line · Stephen Warren
[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
There's an experimental system here that automatically builds and test-boots -stable kernels on some Tegra platforms.
Well, here's a public link for it:
Quoted 8 lines
Quoted 4 lines
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
That's great to see. Testing the -rc stable releases would be great, to find if I break anything, as I don't have Tegra hardware to test them out on.
Greg, FYI... you might be interested in the ARM kernel build/boot reports being posted here:
http://lists.linaro.org/pipermail/kernel-build-reports/2013-October/thread.html
Along with mainline/next/arm-soc we're building/booting your stable queues for v3.10 and v3.11. See the "queue: build:..." and "queue:
boot:..." reports.
This builds all the ARM defconfigs, and does minimal boot test on a pile of different ARM boards.
Kevin
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 30 lines · Kevin Hilman
Quoted 16 lines · Greg KH
Quoted 15 lines · Paul Walmsley
Quoted 8 lines · Paul Walmsley
Hi Greg,
Quoted 3 lines · Greg KH
Quoted 1 line · Stephen Warren
[auto-builders for 3.11.x are failing due to this]
What autobuilders? I haven't heard of this before.
There's an experimental system here that automatically builds and test-boots -stable kernels on some Tegra platforms.
Well, here's a public link for it:
Quoted 8 lines
Quoted 4 lines
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
That's great to see. Testing the -rc stable releases would be great, to find if I break anything, as I don't have Tegra hardware to test them out on.
Greg, FYI... you might be interested in the ARM kernel build/boot reports being posted here:
Quoted 8 lines
http://lists.linaro.org/pipermail/kernel-build-reports/2013-October/thread.html
Along with mainline/next/arm-soc we're building/booting your stable queues for v3.10 and v3.11. See the "queue: build:..." and "queue:
boot:..." reports.This builds all the ARM defconfigs, and does minimal boot test on a pile of different ARM boards.
Thanks, I'll try to watch this, thanks for letting me know about it.
greg k-h
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
In reply to Greg KHHi Greg,
Quoted 6 lines · Greg KH
Quoted 4 lines · Paul Walmsley
Well, here's a public link for it:
Quoted 7 lines
Quoted 4 lines
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
That's great to see. Testing the -rc stable releases would be great, to find if I break anything, as I don't have Tegra hardware to test them out on.
Could you point out the -rc stable releases that you're referring to? Took a look at the linux-stable.git and stable-queue.git trees but was unsure what matched that description.
Would this be something like applying the queue-* patches and testing on a nightly basis?
- Paul
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
Quoted 13 lines · Paul Walmsley
Hi Greg,
Quoted 10 lines · Greg KH
Quoted 8 lines · Paul Walmsley
Well, here's a public link for it:
http://nvt.pwsan.com/pub/linux-stable/testlogs/
So far it's seeded with v3.11.[34]. It should update automatically as new releases come out. So far the tests are quite basic (build + boot to minimal userspace). Please let Stephen and I know if you have any comments or suggestions.
Quoted 7 lines
Quoted 3 lines
That's great to see. Testing the -rc stable releases would be great, to find if I break anything, as I don't have Tegra hardware to test them out on.
Could you point out the -rc stable releases that you're referring to? Took a look at the linux-stable.git and stable-queue.git trees but was unsure what matched that description.
The -rc releases do not end up in a git tree, they show up in the kernel.org/pub/linux/kernel/v3.0/stable-review/ directory when I announce a -rc release is out for testing.
Quoted 2 lines
Would this be something like applying the queue-* patches and testing on a nightly basis?
Yes, that is good to do as well, as that is what the -rc releases are created from.
thanks,
greg k-h
PATCH 1/1 ARM: tegra: unify Tegra's Kconfig a bit more
In reply to Greg KHQuoted 17 lines · Greg KH
Quoted 8 lines · Stephen Warren
From: Stephen Warren <[email protected]>
Move all common select clauses from ARCH_TEGRA_*_SOC to
ARCH_TEGRAto eliminate duplication. The USB-related selects all should have been common too, but were missing from Tegra114 previously. Move these toARCH_TEGRAtoo. The latter fixes a build break when only Tegra114 support was enabled, but not Tegra20 or Tegra30 support.Quoted 5 lines
This is
20984c44b5a08620778ea14fa5807489170fd5cain v3.12-rc1.Signed-off-by Stephen Warren <[email protected]>Reported-by Paul Walmsley <[email protected]>[auto-builders for 3.11.x are failing due to this]What autobuilders? I haven't heard of this before.
Quoted 8 lines
Quoted 4 lines
Cc stable # v3.11--- arch/arm/mach-tegra/Kconfig | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)This fails to apply to the 3.11-stable tree, if you want it there, can you provide a version that actually does apply, and that you have tested to work properly?
Sorry about that. I've sent V2.