em28xx: new board id [0213:0258]
Hello
Got this DVB-S2 USB stick from PCTV Model 461e.
Firmware for 460e does not work. Chipset must be different.
Here are data from Windows driver : PCTV Empia
PCTVEMP_x86_x64.inf
%PCTV461e.DeviceDesc% = USB28179_461e,USB\VID_2013&PID_0258 ; PCTV 461e
[USB28179_461e.NTx86]
Include = ks.inf, kscaptur.inf, ksfilter.inf, bda.inf
Needs = KS.Registration, KSCAPTUR.Registration.NT, BDA.Installation.NT
DelReg = OEM.DelReg, UTL.DelReg
AddReg = CAP.AddRegx86, OEM.AddReg, OEM.Defaults.AddReg, UTL.AddReg, OEM_461e.AddReg
CopyFiles = CAP.CopySYSx86, CAP.CopyDLLx86, UTL.CopyList
[USB28179_461e.NTx86.HW]
AddReg = InstFilter28xx
[USB28179_461e.NTx86.Interfaces]
AddInterface = %KSCATEGORY_BDA_RECEIVER%,%BDACapFilter%, BDACap28179.Interface AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilter%,BDATuner28179.Interface AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilterC%,BDATuner28179-C.Interface AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilterS%,BDATuner28179-S.Interface
lsusb -vvv
Bus 001 Device 002: ID 2013:0258 PCTV Systems Couldn't open device, some information will be missing Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2013 PCTV Systems idProduct 0x0258 bcdDevice 1.00 iManufacturer 3 iProduct 1 iSerial 2 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
dmesg
[ 1.283468] usb 1-1: New USB device found, idVendor=2013, idProduct=0258 [ 1.283473] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.283476] usb 1-1: Product: PCTV 461 [ 1.283478] usb 1-1: Manufacturer: PCTV [ 1.283481] usb 1-1: SerialNumber: 0011317106
Thanks for helping to get this work...
Cheerio
Rudy
Sorry for top posting, but I just posted driver for that stick! Look latest LMML messages.
regards
Antti
Quoted 127 lines · Rodolphe M
Hello
Got this DVB-S2 USB stick from PCTV Model 461e.
Firmware for 460e does not work. Chipset must be different.
Here are data from Windows driver : PCTV Empia
PCTVEMP_x86_x64.inf
%PCTV461e.DeviceDesc% = USB28179_461e,USB\VID_2013&PID_0258 ;
PCTV 461e[USB28179_461e.NTx86]
Include = ks.inf, kscaptur.inf, ksfilter.inf, bda.inf
Needs = KS.Registration, KSCAPTUR.Registration.NT,
BDA.Installation.NT
DelReg = OEM.DelReg, UTL.DelReg
AddReg = CAP.AddRegx86, OEM.AddReg, OEM.Defaults.AddReg,
UTL.AddReg, OEM_461e.AddReg
CopyFiles = CAP.CopySYSx86, CAP.CopyDLLx86, UTL.CopyList[USB28179_461e.NTx86.HW]
AddReg = InstFilter28xx[USB28179_461e.NTx86.Interfaces]
AddInterface = %KSCATEGORY_BDA_RECEIVER%,%BDACapFilter%, BDACap28179.Interface
AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilter%,BDATuner28179.Interface AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilterC%,BDATuner28179-C.Interface AddInterface = %KSCATEGORY_BDA_TUNER%, %BDATunerFilterS%,BDATuner28179-S.Interfacelsusb -vvv
Bus 001 Device 002: ID 2013:0258 PCTV Systems Couldn't open device, some information will be missing Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2013 PCTV Systems idProduct 0x0258 bcdDevice 1.00 iManufacturer 3 iProduct 1 iSerial 2 bNumConfigurations 1Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x84EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize0x00001x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x84EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize0x03ac1x 940 bytes
bInterval 1dmesg
[ 1.283468] usb 1-1: New USB device found, idVendor=2013, idProduct=0258 [ 1.283473] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.283476] usb 1-1: Product: PCTV 461 [ 1.283478] usb 1-1: Manufacturer: PCTV [ 1.283481] usb 1-1: SerialNumber: 0011317106Thanks for helping to get this work...
Cheerio
Rudy--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 1 line
http://palosaari.fi/