No longer able to build kernel into RPM on Fedora
Hello folks,
My usual approach to testing git snapshots of Linus's tree (with custom patches applied on top) is to make rpm and install this into my system for a clean add/remove of test kernels.
However, the developers of rpm removed the --target and -ta options, so I can't take tarball and build into RPM anymore.
Since I last built custom RPM builds of Linus's tree was likely Fedora 18, it seems the option target got removed by 19.
Any ideas, fixes?
Thanks,
Shawn
PATCH 1/1 Force check for rpm-build where package is not installed
Quoted 9 lines · Shawn Starr
Hello folks,
My usual approach to testing git snapshots of Linus's tree (with custom patches applied on top) is to make rpm and install this into my system for a clean add/remove of test kernels.
However, the developers of rpm removed the --target and -ta options, so I can't take tarball and build into RPM anymore.
Quoted 7 lines
Since I last built custom RPM builds of Linus's tree was likely Fedora 18, it seems the option target got removed by 19.
Any ideas, fixes?
Thanks,
Shawn
Sorry for noise, I was missing rpm-build. That said, here's a patch to force check for rpm-build as any modern RPM distribution should be be using a newer rpm release.
Thanks,
Shawn
--- scripts/package/Makefile | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletion(-)
scripts/package/Makefile +7 -1
@@ -23,7 +23,7 @@ # Do we have rpmbuild, otherwise fall back to the older rpm RPM := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \ - else echo rpm; fi) + else echo none; fi) # Remove hyphens since they have special meaning in RPM filenames KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
@@ -51,6 +51,12 @@ rpm-pkg rpm: FORCE rm -f $(objtree)/.scmversion $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version mv -f $(objtree)/.tmp_version $(objtree)/.version + @if test "$(RPM)" != "rpmbuild"; then \ + echo "To build the kernel you must install the rpm-build package from your distri + echo "aborting package creation." ; \ + false; \ + fi + $(RPM) $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz rm $(KERNELPATH).tar.gz kernel.spec
resend [PATCH][BUILD] Force check for rpm-build where package is not installed
Quoted 18 lines · Shawn Starr
Quoted 9 lines · Shawn Starr
Hello folks,
My usual approach to testing git snapshots of Linus's tree (with custom patches applied on top) is to make rpm and install this into my system for a clean add/remove of test kernels.
However, the developers of rpm removed the --target and -ta options, so I can't take tarball and build into RPM anymore.
Quoted 7 lines
Since I last built custom RPM builds of Linus's tree was likely Fedora 18, it seems the option target got removed by 19.
Any ideas, fixes?
Thanks,
Shawn
Quoted 7 lines
Sorry for noise, I was missing rpm-build. That said, here's a patch to force check for rpm-build as any modern RPM distribution should be be using a newer rpm release.
Thanks,
Shawn
--- scripts/package/Makefile | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletion(-)
scripts/package/Makefile +3 -1
@@ -23,7 +23,7 @@ # Do we have rpmbuild, otherwise fall back to the older rpm RPM := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \ - else echo rpm; fi) + else echo none; fi) # Remove hyphens since they have special meaning in RPM filenames KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
@@ -51,6 +51,12 @@ rpm-pkg rpm: FORCE rm -f $(objtree)/.scmversion $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version mv -f $(objtree)/.tmp_version $(objtree)/.version + @if test "$(RPM)" != "rpmbuild"; then \ + echo "To build the kernel you must install the rpm-build
package from your distribution" ;\
+ echo "aborting package creation." ; \
+ false; \
+ fi
+
$(RPM) $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz
rm $(KERNELPATH).tar.gz kernel.specAs a temporary work around, can you revert to the older version of RPM?
Regards
Quoted 22 lines · Shawn Starr
Hello folks,
My usual approach to testing git snapshots of Linus's tree (with custom patches applied on top) is to make rpm and install this into my system for a clean add/remove of test kernels.
However, the developers of rpm removed the --target and -ta options, so I can't take tarball and build into RPM anymore.
Since I last built custom RPM builds of Linus's tree was likely Fedora 18, it seems the option target got removed by 19.
Any ideas, fixes?
Thanks,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 5 lines
Chris Jones Founder and Lead Software Architect Paradise Software [email protected]
Quoted 2 lines · Chris Jones
As a temporary work around, can you revert to the older version of RPM?
Hi Chris,
I was missing rpm-build, I have a patch submitted to force use of rpm-build. AFAIK, nobody uses legacy rpm anymore since falling back to just rpm will fail since it does not have --target or -ta options.
Thanks,
Shawn
Quoted 25 lines
Regards
Quoted 21 lines · Shawn Starr
Hello folks,
My usual approach to testing git snapshots of Linus's tree (with custom patches applied on top) is to make rpm and install this into my system for a clean add/remove of test kernels.
However, the developers of rpm removed the --target and -ta options, so I can't take tarball and build into RPM anymore.
Since I last built custom RPM builds of Linus's tree was likely Fedora 18, it seems the option target got removed by 19.
Any ideas, fixes?
Thanks,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/