arm: socfpga: Set the SDMMC clock phase in system manager
Subsystems (6)
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
From: Dinh Nguyen <[email protected]>
Add functionality in the System Manager to set the SDR settings for the SD/MMC IP.
---
v2:
- Have socfpga_sysmgr_set_dwmmc_drvsel_smpsel() take in the SDR settings directly so that it does not have to walk the DTB.
--- arch/arm/mach-socfpga/Makefile | 2 +- arch/arm/mach-socfpga/core.h | 6 ++++++ arch/arm/mach-socfpga/system_mgr.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-socfpga/system_mgr.c
arch/arm/mach-socfpga/Makefile +1 -1
@@ -2,5 +2,5 @@ # Makefile for the linux kernel. # -obj-y := socfpga.o +obj-y := socfpga.o system_mgr.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o
arch/arm/mach-socfpga/core.h +6 -0
@@ -44,4 +44,10 @@ extern unsigned long cpu1start_addr;#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +/* SDMMC Group for System Manager defines */ +#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108 +#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7 +#define SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel) \ + ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0)) +#endif
arch/arm/mach-socfpga/system_mgr.c new file +28 -0
@@ -0,0 +1,28 @@ +/* +* Copyright Altera Corporation (C) 2013. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <linux/of_platform.h> +#include <asm/mach/map.h> + +#include "core.h" + +void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);
Signature · 1 line
1.7.9.5
PATCH RESEND v2 2/3 mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific functionality
From: Dinh Nguyen <[email protected]>
The SDR timing registers for the SD/MMC IP block for SOCFPGA is located in the system manager. This system manager IP block is located outside of the SD IP block itself. Therefore, the function to set the SDR timing register should be in the platform specific code so that the SD driver can be autonomous of any future System Manager changes.
Also, there is no need for "altr,dw-mshc-ciu-div" as the driver can get the value of the CIU clock from the common clock API.
---
v2:
- Let the mmc driver walk the DTB to get the SDR values
--- drivers/mmc/host/dw_mmc-socfpga.c | 38 +++++++++---------------------------- 1 file changed, 9 insertions(+), 29 deletions(-)
drivers/mmc/host/dw_mmc-socfpga.c +9 -29
@@ -24,16 +24,12 @@#include "dw_mmc.h" #include "dw_mmc-pltfm.h" -#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108 -#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7 -#define SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel) \ - ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0)) +extern void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel);/* SOCFPGA implementation specific driver private data */ struct dw_mci_socfpga_priv_data { -u8 ciu_div;/* card interface unit divisor */ -u32 hs_timing;/* bitmask for CIU clock phase shift */ -struct regmap *sysreg;/* regmap for system manager register */ +u32 drvsel;/*Phase shift for the Drive clock, or tx mode.*/ +u32 smplsel;/*Phase shift for the Sample clock, or rx mode.*/ };static int dw_mci_socfpga_priv_init (struct dw_mci *host)
@@ -45,14 +41,7 @@ static int dw_mci_socfpga_priv_init(struct dw_mci *host)dev_err (host->dev,"mem alloc failed for private data\n" );return -ENOMEM ; } - - priv->sysreg =syscon_regmap_lookup_by_compatible ("altr,sys-mgr" ); -if (IS_ERR (priv->sysreg)) { -dev_err (host->dev,"regmap for altr,sys-mgr lookup failed.\n" ); -return PTR_ERR (priv->sysreg); - } host->priv = priv; -return 0 ; }
@@ -61,20 +50,15 @@ static int dw_mci_socfpga_setup_clock(struct dw_mci *host)struct dw_mci_socfpga_priv_data *priv = host->priv;clk_disable_unprepare (host->ciu_clk); -regmap_write (priv->sysreg,SYSMGR_SDMMCGRP_CTRL_OFFSET , - priv->hs_timing); +socfpga_sysmgr_set_dwmmc_drvsel_smpsel (priv->drvsel, priv->smplsel);clk_prepare_enable (host->ciu_clk); - host->bus_hz /= (priv->ciu_div +1 );return 0 ; }static void dw_mci_socfpga_prepare_command (struct dw_mci *host,u32 *cmdr) { -struct dw_mci_socfpga_priv_data *priv = host->priv; - -if (priv->hs_timing &DRV_CLK_PHASE_SHIFT_SEL_MASK ) - *cmdr |=SDMMC_CMD_USE_HOLD_REG ; + *cmdr |=SDMMC_CMD_USE_HOLD_REG ; }static int dw_mci_socfpga_parse_dt (struct dw_mci *host)
@@ -82,20 +66,16 @@ static int dw_mci_socfpga_parse_dt(struct dw_mci *host)struct dw_mci_socfpga_priv_data *priv = host->priv;struct device_node *np = host->dev->of_node;u32 timing[2 ]; -u32 div =0 ;int ret; - ret =of_property_read_u32 (np,"altr,dw-mshc-ciu-div" , &div); -if (ret) -dev_info (host->dev,"No dw-mshc-ciu-div specified, assuming 1" ); - priv->ciu_div = div; - ret =of_property_read_u32_array (np, -"altr,dw-mshc-sdr-timing" , timing,2 ); +"samsung,dw-mshc-sdr-timing" , timing,2 );if (ret)return ret; - priv->hs_timing =SYSMGR_SDMMC_CTRL_SET (timing[0 ], timing[1 ]); + priv->drvsel = timing[0 ]; + priv->smplsel = timing[1 ]; +return 0 ; }
Signature · 1 line
1.7.9.5
PATCH RESEND v2 3/3 arm: dts: socfpga: Add support for SD/MMC
In reply to dinguyen at altera.comFrom: Dinh Nguyen <[email protected]>
Add bindings for SD/MMC for SOCFPGA.
---
v2:
- Fix documentation s/binding/property and s/Synopsis/Synopsys
--- .../devicetree/bindings/mmc/socfpga-dw-mshc.txt | 38 ++++++++++++++++++++ arch/arm/boot/dts/socfpga.dtsi | 11 ++++++ arch/arm/boot/dts/socfpga_cyclone5.dts | 12 +++++++ arch/arm/boot/dts/socfpga_vt.dts | 12 +++++++ 4 files changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt new file +38 -0
@@ -0,0 +1,38 @@ +* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the SOCFPGA specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "altr,socfpga-dw-mshc": for controllers with Altera SOCFPGA + specific extensions. + +* samsung,dw-mshc-sdr-timing: See exynos-dw-mshc.txt for more information about + this property. + +Example: + dwmmc0 at ff704000 { + compatible = "altr,socfpga-dw-mshc", "snps,dw-mshc"; + reg = <0xff704000 0x1000>; + interrupts = <0 139 4>; + fifo-depth = <0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4_mp_clk>, <&sdmmc_clk>; + clock-names = "biu", "ciu"; + num-slots = <1>; + supports-highspeed; + broken-cd; + samsung,dw-mshc-sdr-timing = <3 0>; + + slot at 0 { + reg = <0>; + bus-width = <4>; + }; + };
arch/arm/boot/dts/socfpga.dtsi +11 -0
@@ -468,6 +468,17 @@ cache-level = <2>; }; + mmc: dwmmc0 at ff704000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff704000 0x1000>; + interrupts = <0 139 4>; + fifo-depth = <0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4_mp_clk>, <&sdmmc_clk>; + clock-names = "biu", "ciu"; + }; + /* Local timer */ timer at fffec600 { compatible = "arm,cortex-a9-twd-timer";
arch/arm/boot/dts/socfpga_cyclone5.dts +12 -0
@@ -48,6 +48,18 @@ }; }; + dwmmc0 at ff704000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + samsung,dw-mshc-sdr-timing = <3 0>; + + slot at 0 { + reg = <0>; + bus-width = <4>; + }; + }; + ethernet at ff702000 { phy-mode = "rgmii"; phy-addr = <0xffffffff>; /* probe for phy addr */
arch/arm/boot/dts/socfpga_vt.dts +12 -0
@@ -41,6 +41,18 @@ }; }; + dwmmc0 at ff704000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + samsung,dw-mshc-sdr-timing = <3 0>; + + slot at 0 { + reg = <0>; + bus-width = <4>; + }; + }; + ethernet at ff700000 { phy-mode = "gmii"; status = "okay";
Signature · 1 line
1.7.9.5
Jaehoon Chung
maintainerPATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
In reply to dinguyen at altera.comHi Dinh,
Quoted 48 lines · dinguyen at altera.com
From: Dinh Nguyen <[email protected]>
Add functionality in the System Manager to set the SDR settings for the SD/MMC IP.
Signed-off-by Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>CC Arnd Bergmann <[email protected]>CC Olof Johansson <[email protected]>Cc Rob Herring <[email protected]>Cc Pawel Moll <[email protected]>Cc Mark Rutland <[email protected]>Cc Stephen Warren <[email protected]>Cc Ian Campbell <[email protected]>Cc Chris Ball <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Seungwon Jeon <[email protected]>Cc devicetree at vger.kernel.orgCc linux-mmc at vger.kernel.orgCC linux-arm-kernel at lists.infradead.org---
v2:
- Havesocfpga_sysmgr_set_dwmmc_drvsel_smpsel()take in the SDR settings directly so that it does not have to walk the DTB.--- arch/arm/mach-socfpga/Makefile | 2 +- arch/arm/mach-socfpga/core.h | 6 ++++++ arch/arm/mach-socfpga/system_mgr.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-socfpga/system_mgr.carch/arm/mach-socfpga/Makefile +1
-1@@ -2,5 +2,5 @@ # Makefile for the linux kernel. # -obj-y := socfpga.o +obj-y := socfpga.o system_mgr.o obj-$(CONFIG_SMP) += headsmp.o platsmp.oarch/arm/mach-socfpga/core.h +0
-0
arch/arm/mach-socfpga/core.h extern unsigned long cpu1start_addr; · line 49
Quoted 6 lines
arch/arm/mach-socfpga/core.h +3
-0@@ -44,4 +44,10 @@ extern unsigned long cpu1start_addr;#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +/* SDMMC Group for System Manager defines */ +#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108 +#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7
I didn't see where this define is used. When do this use?
Best Regards,
Jaehoon Chung
Quoted 39 lines
arch/arm/mach-socfpga/core.h +3
-0+#define SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel) \ + ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0)) +#endif arch/arm/mach-socfpga/system_mgr.c new file +28
-0@@ -0,0 +1,28 @@ +/* +* Copyright Altera Corporation (C) 2013. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <linux/of_platform.h> +#include <asm/mach/map.h> + +#include "core.h" + +void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Hi Jaehoo,
Quoted 52 lines · Jaehoon Chung
Hi Dinh,
Quoted 49 lines · dinguyen at altera.com
From: Dinh Nguyen <[email protected]>
Add functionality in the System Manager to set the SDR settings for the SD/MMC IP.
Signed-off-by Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>CC Arnd Bergmann <[email protected]>CC Olof Johansson <[email protected]>Cc Rob Herring <[email protected]>Cc Pawel Moll <[email protected]>Cc Mark Rutland <[email protected]>Cc Stephen Warren <[email protected]>Cc Ian Campbell <[email protected]>Cc Chris Ball <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Seungwon Jeon <[email protected]>Cc devicetree at vger.kernel.orgCc linux-mmc at vger.kernel.orgCC linux-arm-kernel at lists.infradead.org---
v2:
- Havesocfpga_sysmgr_set_dwmmc_drvsel_smpsel()take in the SDR settings directly so that it does not have to walk the DTB.--- arch/arm/mach-socfpga/Makefile | 2 +- arch/arm/mach-socfpga/core.h | 6 ++++++ arch/arm/mach-socfpga/system_mgr.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+), 1 deletion(-)create mode 100644
arch/arm/mach-socfpga/system_mgr.carch/arm/mach-socfpga/Makefile +1
-1@@ -2,5 +2,5 @@ # Makefile for the linux kernel. # -obj-y := socfpga.o +obj-y := socfpga.o system_mgr.o obj-$(CONFIG_SMP) += headsmp.o platsmp.oarch/arm/mach-socfpga/core.h +0
-0@@ -44,4 +44,10 @@ extern unsigned long cpu1start_addr;
Quoted 6 lines
arch/arm/mach-socfpga/core.h extern unsigned long cpu1start_addr; · line 49
Quoted 5 lines
arch/arm/mach-socfpga/core.h +3
-0#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +/* SDMMC Group for System Manager defines */ +#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108 +#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7I didn't see where this define is used. When do this use?
It's not used at all. I will remove.
Thanks for the review.
Dinh
Quoted 43 lines
Best Regards,
Jaehoon ChungQuoted 39 lines
arch/arm/mach-socfpga/core.h +3
-0+#define SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel) \ + ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0)) +#endif arch/arm/mach-socfpga/system_mgr.c new file +28
-0@@ -0,0 +1,28 @@ +/* +* Copyright Altera Corporation (C) 2013. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <linux/of_platform.h> +#include <asm/mach/map.h> + +#include "core.h" + +void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
In reply to dinguyen at altera.comarch/arm/mach-socfpga/system_mgr.c line 28
Quoted 8 lines · dinguyen at altera.com
arch/arm/mach-socfpga/system_mgr.c new file +8
-0+void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);
This looks like the wrong approach. What are you trying to do? If you want to set a clock, please use the clk API.
Arnd
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Hi Arnd,
Quoted 11 lines · Arnd Bergmann
arch/arm/mach-socfpga/system_mgr.c line 28
Quoted 8 lines · dinguyen at altera.com
arch/arm/mach-socfpga/system_mgr.c new file +8
-0+void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);This looks like the wrong approach. What are you trying to do? If you want to set a clock, please use the clk API.
I can't use the clk API because this function is setting up a clock phase bit for the SD/MMC
clock that is used to clock the card, not the IP. This register is located outside the SD/MMC
and the clock manager.
Just to refresh your memory on this topic:
I tried to use the syscon approach that you suggested:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/168470.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/170423.html
But this approach was rejected by Stephen Warren because we wanted to the SD driver to be automonous
of registers outside its IP:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/194014.html
So I went with the approach of exposing a platform API so that the SD/MMC platform specific
code can call it.
The system manager has a plethora of registers that controls other IPs on the SOC, so I kinda thought
syscon was the way to go with this. A driver for this IP did not make sense to me.
Please advise if you know of another approach?
Thanks,
Dinh
Quoted 2 lines
Arnd
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Quoted 20 lines · Dinh Nguyen
Hi Arnd,
Quoted 11 lines · Arnd Bergmann
arch/arm/mach-socfpga/system_mgr.c line 28
Quoted 8 lines · dinguyen at altera.com
arch/arm/mach-socfpga/system_mgr.c new file +8
-0+void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);This looks like the wrong approach. What are you trying to do? If you want to set a clock, please use the clk API.
I can't use the clk API because this function is setting up a clock phase bit for the SD/MMC
clock that is used to clock the card, not the IP. This register is located outside the SD/MMC
and the clock manager.
Quoted 5 lines
Just to refresh your memory on this topic:
I tried to use the syscon approach that you suggested:http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/168470.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/170423.html
Ah, thanks. I knew this problem had come up before, I just didn't remember it was for socfpga.
Quoted 10 lines
But this approach was rejected by Stephen Warren because we wanted to the SD driver to be automonous
of registers outside its IP:http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/194014.html
So I went with the approach of exposing a platform API so that the SD/MMC platform specific
code can call it.
Quoted 6 lines
The system manager has a plethora of registers that controls other IPs on the SOC, so I kinda thought
syscon was the way to go with this. A driver for this IP did not make sense to me.Please advise if you know of another approach?
I don't remember the details of what we have gone through before, but I think this should still work:
1 Create a "syscon" backend driver to control your "system manager", which
lets other drivers hook into it without calling a private API.
2 Create a trivial clock driver that is independent of your existing
clock driver and independent of the other drivers using the system manager, by using syscon as the low-level interface.
3 Make the sdmmc driver use the normal clock API and link its clock to the
driver from step 2 in the device tree.
Is this what you have tried before?
Arnd
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Hi Arnd,
Quoted 44 lines · Arnd Bergmann
Quoted 20 lines · Dinh Nguyen
Hi Arnd,
Quoted 11 lines · Arnd Bergmann
arch/arm/mach-socfpga/system_mgr.c line 28
Quoted 8 lines · dinguyen at altera.com
arch/arm/mach-socfpga/system_mgr.c new file +8
-0+void socfpga_sysmgr_set_dwmmc_drvsel_smpsel (u32 drvsel,u32 smplsel) +{ +u32 hs_timing; + + hs_timing =SYSMGR_SDMMC_CTRL_SET (smplsel, drvsel); +writel (hs_timing, sys_manager_base_addr +SYSMGR_SDMMCGRP_CTRL_OFFSET ); +} +EXPORT_SYMBOL (socfpga_sysmgr_set_dwmmc_drvsel_smpsel);This looks like the wrong approach. What are you trying to do? If you want to set a clock, please use the clk API.
I can't use the clk API because this function is setting up a clock phase bit for the SD/MMC
clock that is used to clock the card, not the IP. This register is located outside the SD/MMC
and the clock manager.Quoted 5 lines
Just to refresh your memory on this topic:
I tried to use the syscon approach that you suggested:http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/168470.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/170423.htmlAh, thanks. I knew this problem had come up before, I just didn't remember it was for socfpga.
Quoted 15 lines
But this approach was rejected by Stephen Warren because we wanted to the SD driver to be automonous
of registers outside its IP:http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/194014.html
So I went with the approach of exposing a platform API so that the SD/MMC platform specific
code can call it.The system manager has a plethora of registers that controls other IPs on the SOC, so I kinda thought
syscon was the way to go with this. A driver for this IP did not make sense to me.
Quoted 6 lines
Quoted 1 line
Please advise if you know of another approach?
I don't remember the details of what we have gone through before, but I think this should still work:
1 Create a "syscon" backend driver to control your "system manager", which
lets other drivers hook into it without calling a private API.
Yes, if you look at drivers/mmc/host/dw_mmc-socfpga.c that is in the mainline,
it is hooking into the "system manager" through "syscon". Is this what you mean here?
The problem is because of the SYSMGR_SDMMCGRP_CTRL_OFFSET define in this file. This means the SD/MMC driver needs information that is outside of its IP.
Dinh
Quoted 9 lines
2 Create a trivial clock driver that is independent of your existing
clock driver and independent of the other drivers using the system manager, by using syscon as the low-level interface.
3 Make the sdmmc driver use the normal clock API and link its clock to the
driver from step 2 in the device tree.Is this what you have tried before?
Arnd
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Quoted 7 lines · Dinh Nguyen
Quoted 3 lines
1 Create a "syscon" backend driver to control your "system manager", which
lets other drivers hook into it without calling a private API.Yes, if you look at
drivers/mmc/host/dw_mmc-socfpga.cthat is in the mainline,
it is hooking into the "system manager" through "syscon". Is this what you mean here?
No, because you directly hook into the syscon driver, rather than using a clock driver as the middle-man, see steps 2 and 3 below.
Quoted 3 lines
The problem is because of the
SYSMGR_SDMMCGRP_CTRL_OFFSETdefine in this file. This means the SD/MMC driver needs information that is outside of its IP.
Yes, this is not ideal because you don't really want that information in the sd/mmc driver. That driver should only know about the fact that it talks to a clock controller, not how it's implemented.
Arnd
Quoted 7 lines
Quoted 7 lines
2 Create a trivial clock driver that is independent of your existing
clock driver and independent of the other drivers using the system manager, by using syscon as the low-level interface.
3 Make the sdmmc driver use the normal clock API and link its clock to the
driver from step 2 in the device tree.Is this what you have tried before?
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Quoted 10 lines · Arnd Bergmann
Quoted 6 lines · Dinh Nguyen
Quoted 2 lines
1 Create a "syscon" backend driver to control your "system manager", which
lets other drivers hook into it without calling a private API.Yes, if you look at
drivers/mmc/host/dw_mmc-socfpga.cthat is in the mainline,
it is hooking into the "system manager" through "syscon". Is this what you mean here?No, because you directly hook into the syscon driver, rather than using a clock driver as the middle-man, see steps 2 and 3 below.
Ok, now I understand.
Quoted 14 lines
Quoted 3 lines
The problem is because of the
SYSMGR_SDMMCGRP_CTRL_OFFSETdefine in this file. This means the SD/MMC driver needs information that is outside of its IP.Yes, this is not ideal because you don't really want that information in the sd/mmc driver. That driver should only know about the fact that it talks to a clock controller, not how it's implemented.
Arnd
Quoted 5 lines
Quoted 5 lines
2 Create a trivial clock driver that is independent of your existing
clock driver and independent of the other drivers using the system manager, by using syscon as the low-level interface.
3 Make the sdmmc driver use the normal clock API and link its clock to the
driver from step 2 in the device tree.
This makes sense for the SD/MMC driver, but do you think I can use the same approach for
other drivers that this system manager touches? i.e. The ethernet IP's PHY setting is controlled
by a register that is in the system manager as well.
I have submitted this patch for enabling ethernet. It is making use of the driver platform specific
driver calls to touch the system manager.
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/200173.html
Just wondering if that is right approach for the ethernet driver? If not, then I think I may have
to come up with a generic system manager driver so that it can be used for other IPs.
Thanks,
Dinh
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Is this what you have tried before?
PATCH RESEND v2 1/3 arm: socfpga: Set the SDMMC clock phase in system manager
Quoted 3 lines · Dinh Nguyen
This makes sense for the SD/MMC driver, but do you think I can use the same approach for
other drivers that this system manager touches?
It might not be as straightforward for every driver, but something like this should work at least for some of the more interesting ones. For the rest, you can have a system manager driver that exports functions.
Quoted 9 lines
i.e. The ethernet IP's
PHY setting is controlled
by a register that is in the system manager as well.I have submitted this patch for enabling ethernet. It is making use of the driver platform specific
driver calls to touch the system manager.http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/200173.html
I definitely don't want to see auxdata getting used for stuff like this.
In case of the ethernet driver, I suspect an SoC specific PHY driver would be the right approach.
Quoted 4 lines
Just wondering if that is right approach for the ethernet driver? If not, then I think I may have
to come up with a generic system manager driver so that it can be used for other IPs.
The general way of handling this should be to see if there is a subsystem available for handling a particular feature. In case of clk and phy, we have those subsystems, so it's a matter of writing an appropriate driver that communicates with the high-level drivers using that.
I don't know what other features are provided by the system manager that might need a different solution, but if you can't come up with a nice solution, you can either have an soc specific portion in the device driver (as you suggested for sdmmc first), or you can have that platform specific mfd driver exporting some functions.
If the functionality is actually something common but doesn't have a subsystem in Linux yet, the "right" approach might also be to introduce a new subsystem, which I realize can be a lot of work.
Arnd