Skip to contentSkip to conversation

All M68K boards are broken

PATCH New Masahiro Yamada 4 participants 10 messages Oct 16, 2013 – Jun 19, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover All M68K boards are broken

Hello.

Even after applying the patch
"config.mk: fix -fstack-usage support test"
(http://patchwork.ozlabs.org/patch/283619/),
I still cannot compile m68k correctly.

The result of CROSS_COMPILE=m68k-linux- ./MAKEALL -a m68k is

    --------------------- SUMMARY ----------------------------
    Boards compiled: 50
    Boards with errors: 6 ( M5253DEMO M54455EVB M54455EVB_a66
    M54455EVB_i66 M54455EVB_intel M54455EVB_stm33 )
    Boards with warnings but no errors: 44 ( M52277EVB
    M52277EVB_stmicro M5235EVB M5235EVB_Flash32 idmr cobra5272
    eb_cpu5282 eb_cpu5282_internal TASREG M5208EVBE M5249EVB
    M5253EVBE M5271EVB M5272C3 M5275EVB M5282EVB astro_mcf5373l
    M53017EVB M5329AFEE M5329BFEE M5373EVB M54418TWR
    M54418TWR_nand_mii M54418TWR_nand_rmii M54418TWR_nand_rmii_lowfreq
    M54418TWR_serial_mii M54418TWR_serial_rmii M54451EVB M54451EVB_stmicro
    M5475AFE M5475BFE M5475CFE M5475DFE M5475EFE M5475FFE M5475GFE
    M5485AFE M5485BFE M5485CFE M5485DFE M5485EFE M5485FFE M5485GFE M5485HFE )
    ----------------------------------------------------------

I just took a look and
I found lots of files are left broken for a long term.

I pick up some them here.

(1) drivers/i2c/i2c_core.c
i2c_core.c: In function 'i2c_reloc_fixup':
i2c_core.c:63:20: warning: assignment from incompatible pointer type [enabled by default] i2c_core.c:67:21: warning: assignment from incompatible pointer type [enabled by default] i2c_core.c:71:20: warning: assignment from incompatible pointer type [enabled by default] i2c_core.c:76:21: warning: assignment from incompatible pointer type [enabled by default] i2c_core.c:81:29: warning: assignment from incompatible pointer type [enabled by default]

(2) arch/m68k/lib/bootm.c

bootm.c:53:8: warning: unused variable 'rd_len' [-Wunused-variable]
bootm.c:99:12: warning: 'initrd_start' may be used uninitialized in this function [-Wuninitialized] bootm.c:99:12: warning: 'initrd_end' may be used uninitialized in this function [-Wuninitialized] bootm.c:99:12: warning: 'cmd_start' may be used uninitialized in this function [-Wuninitialized] bootm.c:99:12: warning: 'cmd_end' may be used uninitialized in this function [-Wuninitialized]

(3) arch/m68k/cpu/mcf5445x/cpu_init.c

cpu_init.c:367:21: warning: unused variable 'info' [-Wunused-variable]

(4)
cpu_init.c:48:2: warning: passing argument 1 of 'out_be32' from incompatible pointer type [enabled by default] arch/m68k/include/asm/io.h:207:20: note: expected 'volatile unsigned int *' but argument is of type 'u16 *' cpu_init.c:49:2: warning: passing argument 1 of 'out_be32' from incompatible pointer type [enabled by default] arch/m68k/include/asm/io.h:207:20: note: expected 'volatile unsigned int *' but argument is of type 'u16 *'

(5)
include/configs/M5253DEMO.h:1:1: error: unknown type name 'TABILITY' include/configs/M5253DEMO.h:1:13: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'FITNESS' include/configs/M5253DEMO.h:1:13: error: unknown type name 'FITNESS' include/configs/M5253DEMO.h:2:2: error: stray '@' in program

(6)
cpu_init.c: In function 'cpu_init_f':
cpu_init.c:211:10: warning: unused variable 'wdog' [-Wunused-variable]

(7)
mcf5373l.c: In function 'initdram':
mcf5373l.c:83:5: warning: pointer targets in passing argument 1 of 'get_ram_size' differ in signedness [-Wpointer-sign] include/common.h:456:6: note: expected 'long int *' but argument is of type 'long unsigned int *'

(8)
fpga.c:168:2: warning: initialization from incompatible pointer type [enabled by default] fpga.c:168:2: warning: (near initialization for 'altera_fns.write') [enabled by default] fpga.c: In function 'astro5373l_altera_load':
fpga.c:196:20: warning: assignment from incompatible pointer type [enabled by default]

(9)
speed.c: In function 'setup_5441x_clocks':
speed.c:118:2: warning: passing argument 1 of 'in_be16' makes pointer from integer without a cast [enabled by default] arch/m68k/include/asm/io.h:177:19: note: expected 'volatile u16 *' but argument is of type 'u16'

(10)
fsl_i2c.c:50:39: error: 'CONFIG_SYS_FSL_I2C_OFFSET' undeclared here (not in a function)

I began to fix some of them and I gave up on the way.

Who is the custodian of M68K?
I doubt M68K is maintained.

Masahiro Yamada (3):
i2c: eliminate warnings in i2c_reloc_fixup function
m68k: eliminate warnings in do_bootm_linux function
m68k: eliminate a warning in cpu_init

 arch/m68k/cpu/mcf5445x/cpu_init.c |  2 +-
 arch/m68k/lib/bootm.c             |  7 ++++++-
 drivers/i2c/i2c_core.c            | 12 +++++-------
 3 files changed, 12 insertions(+), 9 deletions(-)
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/3 i2c: eliminate warnings in i2c_reloc_fixup function

The prototype of handlers had changed.
This commit uses cast with (void *) rather than
the handler-specific prototype.

---

Note:
The body of i2c_reloc_fixup function is surrounded by
#if defined(CONFIG_NEEDS_MANUAL_RELOC) ... #endif

avr32, m68k, nds32, sparc defines this macro.

 drivers/i2c/i2c_core.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/i2c/i2c_core.c +5 -7
index d1072e8..b853ac2 100644
@@ -60,25 +60,23 @@ void i2c_reloc_fixup(void)
 		/* i2c_init() */
 		addr = (unsigned long)i2c_adap_p->init;
 		addr += gd->reloc_off;
-		i2c_adap_p->init = (void (*)(int, int))addr;
+		i2c_adap_p->init = (void *)addr;
 		/* i2c_probe() */
 		addr = (unsigned long)i2c_adap_p->probe;
 		addr += gd->reloc_off;
-		i2c_adap_p->probe = (int (*)(uint8_t))addr;
+		i2c_adap_p->probe = (void *)addr;
 		/* i2c_read() */
 		addr = (unsigned long)i2c_adap_p->read;
 		addr += gd->reloc_off;
-		i2c_adap_p->read = (int (*)(uint8_t, uint, int, uint8_t *,
-					int))addr;
+		i2c_adap_p->read = (void *)addr;
 		/* i2c_write() */
 		addr = (unsigned long)i2c_adap_p->write;
 		addr += gd->reloc_off;
-		i2c_adap_p->write = (int (*)(uint8_t, uint, int, uint8_t *,
-					int))addr;
+		i2c_adap_p->write = (void *)addr;
 		/* i2c_set_bus_speed() */
 		addr = (unsigned long)i2c_adap_p->set_bus_speed;
 		addr += gd->reloc_off;
-		i2c_adap_p->set_bus_speed = (uint (*)(uint))addr;
+		i2c_adap_p->set_bus_speed = (void *)addr;
 		/* name */
 		addr = (unsigned long)i2c_adap_p->name;
 		addr += gd->reloc_off;
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH 1/3 i2c: eliminate warnings in i2c_reloc_fixup function

Hello Masahiro,

Am 16.10.2013 06:53, schrieb Masahiro Yamada:

Quoted 11 lines

The prototype of handlers had changed.
This commit uses cast with (void *) rather than
the handler-specific prototype.

---
Note:
The body of i2c_reloc_fixup function is surrounded by
#if defined(CONFIG_NEEDS_MANUAL_RELOC) ... #endif

Quoted 5 lines

avr32, m68k, nds32, sparc defines this macro.

  drivers/i2c/i2c_core.c | 12 +++++-------
  1 file changed, 5 insertions(+), 7 deletions(-)

Applied to u-boot-i2c.git

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#3 lore raw

PATCH 2/3 m68k: eliminate warnings in do_bootm_linux function

In reply to Masahiro Yamada

- delete an unused variable
- set forcibly some variables to zero

---

*** CAUTION ***
I do not think I am doing right thing.
(I post this patch just to raise the flag.)

Experts of M68K architecture, please fix this correctly.

 arch/m68k/lib/bootm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
arch/m68k/lib/bootm.c +6 -1
index 804e01d..e71f593 100644
@@ -50,7 +50,6 @@ void arch_lmb_reserve(struct lmb *lmb)
 
 int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
 {
-	ulong rd_len;
 	ulong initrd_start, initrd_end;
 	int ret;
 
@@ -87,6 +86,12 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
 
+	/* Workaround to eliminate warnings: FIX ME */
+	initrd_start = 0;
+	initrd_end = 0;
+	cmd_start = 0;
+	cmd_end = 0;
+
 	/*
 	 * Linux Kernel Parameters (passing board info data):
 	 *   sp+00: Ignore, side effect of using jsr to jump to kernel
Signature · 1 line
1.8.1.2
#4 lore raw

PATCH 3/3 m68k: eliminate a warning in cpu_init

In reply to Masahiro Yamada
---
 arch/m68k/cpu/mcf5445x/cpu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/m68k/cpu/mcf5445x/cpu_init.c +1 -1
index 9c324dc..b4a8eef 100644
@@ -364,9 +364,9 @@ void uart_port_conf(int port)
 int fecpin_setclear(struct eth_device *dev, int setclear)
 {
 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5445x
 	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
 
-#ifdef CONFIG_MCF5445x
 	if (setclear) {
 #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
Signature · 1 line
1.8.1.2
#5 lore raw

PATCH 3/3 m68k: eliminate a warning in cpu_init

Quoted 1 line · Masahiro Yamada

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140619/a95ed560/attachment.pgp>
#6 lore raw

cover All M68K boards are broken

In reply to Masahiro Yamada

Hi Masahiro,

Quoted 6 lines · Masahiro Yamada

Hello.

Even after applying the patch
"config.mk: fix -fstack-usage support test"
(http://patchwork.ozlabs.org/patch/283619/),
I still cannot compile m68k correctly.

Patch 283691 has not been applied and won't be since it breaks builds; therefore, to fix this, rather than submitting this new patch, please provide a new and fixed version (v5) of the existing one.

Amicalement,

Signature · 1 line
Albert.
#7 lore raw

cover All M68K boards are broken

Hello Albert.

Quoted 8 lines
Quoted 4 lines

Even after applying the patch
"config.mk: fix -fstack-usage support test"
(http://patchwork.ozlabs.org/patch/283619/),
I still cannot compile m68k correctly.

Patch 283691 has not been applied and won't be since it breaks builds; therefore, to fix this, rather than submitting this new patch, please provide a new and fixed version (v5) of the existing one.

Sorry, I could not understand what you mean.

I think Patch 283691 does not break builds, but fixes -fstack-usage related warnings on Blackfin, M68K, etc.

What I mean is:
Patch 283619 makes it better,
but we still have lots of other errors/warnings.

Best Regards
Masahiro Yamada

#8 lore raw

cover All M68K boards are broken

Hi Masahiro,

Quoted 14 lines · Masahiro Yamada

Hello Albert.

Quoted 8 lines
Quoted 4 lines

Even after applying the patch
"config.mk: fix -fstack-usage support test"
(http://patchwork.ozlabs.org/patch/283619/),
I still cannot compile m68k correctly.

Patch 283691 has not been applied and won't be since it breaks builds; therefore, to fix this, rather than submitting this new patch, please provide a new and fixed version (v5) of the existing one.

Sorry, I could not understand what you mean.

Quoted 7 lines

I think Patch 283691 does not break builds, but fixes -fstack-usage related warnings on Blackfin, M68K, etc.

What I mean is:
Patch 283619 makes it better,
but we still have lots of other errors/warnings.

That's what I understood too; and the way you said it, I thought this patch series was an improvement on 283619. If it is unrelated, then ignore my comment.

Quoted 2 lines

Best Regards
Masahiro Yamada

Amicalement,

Signature · 1 line
Albert.
#9 lore raw

cover All M68K boards are broken

Hello Albert

Quoted 1 line

If it is unrelated, then ignore my comment.

Yes.
They are totally unrelated.

Quoted 4 lines

Even after applying the patch
"config.mk: fix -fstack-usage support test"
(http://patchwork.ozlabs.org/patch/283619/),
I still cannot compile m68k correctly.

I should have dropped this comment.
It looks like it was confusing...

Best Regards
Masahiro Yamada