Skip to contentSkip to conversation

iio: cm36651: Add CM36651 proximity/light sensor

PATCH Applied Beomho Seo 2 participants 2 messages Oct 17, 2013 1 message not in the archive

Subsystems (2)
IIO Capella microsystems light sensor driver
lore
Share & tools
lore

Beomho Seo

author
#0 lore raw

PATCH v7 1/2 iio: cm36651: Add CM36651 proximity/light sensor

This patch adds a new driver for Capella CM36651 proximity and RGB sensor.

Signed-off-by Beomho Seo <[email protected]>
---
 drivers/iio/light/Kconfig   |   11 +
 drivers/iio/light/Makefile  |    1 +
 drivers/iio/light/cm36651.c |  708 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 720 insertions(+)
 create mode 100644 drivers/iio/light/cm36651.c
drivers/iio/light/Kconfig +11 -0
index 0a25ae6..f98c2b5 100644
@@ -27,6 +27,17 @@ config APDS9300
 	 To compile this driver as a module, choose M here: the
 	 module will be called apds9300.
 
+config CM36651
+	depends on I2C
+	tristate "CM36651 driver"
+	help
+	 Say Y here if you use cm36651.
+	 This option enables proximity & RGB sensor using
+	 Capella cm36651 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm36651.
+
 config GP2AP020A00F
 	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
 	depends on I2C
drivers/iio/light/Makefile +1 -0
index cef590f..b615cf3 100644
@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
+obj-$(CONFIG_COM36651)		+= cm36651.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
drivers/iio/light/cm36651.c new file +708 -0

708 lines not on this page · raw message

Signature · 8 lines
1.7.9.5

-- 
Best Regards,

Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 4 lines · Beomho Seo

This patch adds a new driver for Capella CM36651 proximity and RGB sensor.

Signed-off-by Beomho Seo <[email protected]>

I have fixed the typo in the makefile and applied this to the togreg branch of iio.git.

It does make me a little nervous that you clearly have not tested the last few versions, but the changes have been simple enough, I'm assuming that nothing has broken from the point of view of the driver actually working.

Thanks,

Quoted 34 lines
---
 drivers/iio/light/Kconfig   |   11 +
 drivers/iio/light/Makefile  |    1 +
 drivers/iio/light/cm36651.c |  708 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 720 insertions(+)
 create mode 100644 drivers/iio/light/cm36651.c
drivers/iio/light/Kconfig +11 -0
index 0a25ae6..f98c2b5 100644
@@ -27,6 +27,17 @@ config APDS9300
 	 To compile this driver as a module, choose M here: the
 	 module will be called apds9300.
 
+config CM36651
+	depends on I2C
+	tristate "CM36651 driver"
+	help
+	 Say Y here if you use cm36651.
+	 This option enables proximity & RGB sensor using
+	 Capella cm36651 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm36651.
+
 config GP2AP020A00F
 	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
 	depends on I2C
drivers/iio/light/Makefile +0 -0
index cef590f..b615cf3 100644

drivers/iio/light/Makefile line 8

Quoted 4 lines
drivers/iio/light/Makefile +1 -0
@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
+obj-$(CONFIG_COM36651)		+= cm36651.o

CONFIG_CM36651

Quoted 6 lines
drivers/iio/light/Makefile +0 -0
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
drivers/iio/light/cm36651.c new file +0 -0
new file mode 100644
index 0000000..ff4bcd2