of: add vendor prefix for Eukrea Electromatique.
Subsystems (7)
PATCH v4 1/11 of: add vendor prefix for Eukrea Electromatique.
Trivial patch to add Eukr?a Electromatique to the list of devicetree vendor prefixes.
--- .../devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -25,6 +25,7 @@ denx Denx Software Engineering emmicro EM Microelectronic epson Seiko Epson Corp. est ESTeem Wireless Modems +eukrea Eukr?a Electromatique fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
Signature · 1 line
1.7.9.5
PATCH v4 2/11 video: imxfb: Introduce regulator support.
This commit is based on the following commit by Fabio Estevam:
4344429 video: mxsfb: Introduce regulator support
---
ChangeLog v3->v4:
- Added a dev_info when there is no lcd regulator.
--- drivers/video/imxfb.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
drivers/video/imxfb.c +29 -0
@@ -28,6 +28,7 @@#include <linux/cpufreq.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/math64.h>
@@ -145,6 +146,7 @@ struct imxfb_info {struct clk *clk_ipg;struct clk *clk_ahb;struct clk *clk_per; +struct regulator *reg_lcd;enum imxfb_type devtype;bool enabled;
@@ -563,12 +565,23 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)static void imxfb_enable_controller (struct imxfb_info *fbi) { +int ret;if (fbi->enabled)return ;pr_debug ("Enabling LCD controller\n" ); +if (fbi->reg_lcd) { + ret =regulator_enable (fbi->reg_lcd); +if (ret) { +dev_err (&fbi->pdev->dev, +"lcd regulator enable failed with error: %d\n" , + ret); +return ; + } + } +writel (fbi->screen_dma, fbi->regs +LCDC_SSA );/* panning offset 0 (0 pixel offset) */
@@ -597,6 +610,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)static void imxfb_disable_controller (struct imxfb_info *fbi) { +int ret; +if (!fbi->enabled)return ;
@@ -613,6 +628,14 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) fbi->enabled = false;writel (0 , fbi->regs +LCDC_RMCR ); + +if (fbi->reg_lcd) { + ret =regulator_disable (fbi->reg_lcd); +if (ret) +dev_err (&fbi->pdev->dev, +"lcd regulator disable failed with error: %d\n" , + ret); + } }static int imxfb_blank (int blank,struct fb_info *info)
@@ -1020,6 +1043,12 @@ static int imxfb_probe(struct platform_device *pdev) goto failed_register; } + fbi->reg_lcd =devm_regulator_get (&pdev->dev,"lcd" ); +if (IS_ERR (fbi->reg_lcd)) { +dev_info (&pdev->dev,"No lcd regulator used.\n" ); + fbi->reg_lcd =NULL ; + } +imxfb_enable_controller (fbi); fbi->pdev = pdev;#ifdef PWMR_BACKLIGHT_AVAILABLE
Signature · 1 line
1.7.9.5
PATCH v4 3/11 video: imxfb: Also add pwmr for the device tree.
In reply to Denis Cariklipwmr has to be set to get the imxfb backlight work, though pwmr was only configurable trough the platform data.
--- .../devicetree/bindings/video/fsl,imx-fb.txt | 3 +++ drivers/video/imxfb.c | 2 ++ 2 files changed, 5 insertions(+)
Documentation/devicetree/bindings/video/fsl,imx-fb.txt +3 -0
@@ -17,6 +17,9 @@ Required nodes: Optional properties: - fsl,dmacr: DMA Control Register value. This is optional. By default, the register is not modified as recommended by the datasheet. +- fsl,pwmr: LCDC PWM Contrast Control Register value. That property is + optional, but defining it is necessary to get the backlight working. If that + property is ommited, the register is zeroed. - fsl,lscr1: LCDC Sharp Configuration Register value. Example:
drivers/video/imxfb.c +2 -0
@@ -833,6 +833,8 @@ static int imxfb_init_fbinfo(struct platform_device *pdev)of_property_read_u32 (np,"fsl,dmacr" , &fbi->dmacr); +of_property_read_u32 (np,"fsl,pwmr" , &fbi->pwmr); +/* These two function pointers could be used by some specific * platforms. */ fbi->lcd_power =NULL ;
Signature · 1 line
1.7.9.5
PATCH v4 4/11 ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver.
In reply to Denis Carikli--- arch/arm/mach-imx/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/mach-imx/Kconfig +2 -0
@@ -254,6 +254,7 @@ endchoice config MACH_IMX25_DT bool "Support i.MX25 platforms from device tree" select SOC_IMX25 + select IMX_HAVE_PLATFORM_IMX_FB help Include support for Freescale i.MX25 based platforms using the device tree for discovery
@@ -442,6 +443,7 @@ config MACH_IMX27IPCAM config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB help Include support for Freescale i.MX27 based platforms using the device tree for discovery
Signature · 1 line
1.7.9.5
PATCH v4 5/11 pinctrl: pinctrl-imx: add imx25 pinctrl driver
In reply to Denis CarikliThis is mostly cut and paste from the imx35 pinctrl driver. The data was generated using sed and awk on
arch/arm/plat-mxc/include/mach/iomux-mx25.h.
--- .../bindings/pinctrl/fsl,imx25-pinctrl.txt | 33 ++ arch/arm/boot/dts/imx25-pinfunc.h | 513 ++++++++++++++++++++ arch/arm/boot/dts/imx25.dtsi | 1 + arch/arm/mach-imx/Kconfig | 2 + drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx25.c | 351 ++++++++++++++ 7 files changed, 909 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h create mode 100644 drivers/pinctrl/pinctrl-imx25.c
Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt new file +33 -0
@@ -0,0 +1,33 @@ +* Freescale IMX25 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx25-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx25 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx25-pinfunc.h in device tree source folder for all available +imx25 PIN_FUNC_ID.
arch/arm/boot/dts/imx25-pinfunc.h new file +513 -0
513 lines not on this page · raw message
arch/arm/boot/dts/imx25.dtsi +1 -0
@@ -10,6 +10,7 @@ */ #include "skeleton.dtsi" +#include "imx25-pinfunc.h" / { aliases {
arch/arm/mach-imx/Kconfig +2 -0
@@ -111,6 +111,8 @@ config SOC_IMX25 select COMMON_CLK select CPU_ARM926T select MXC_AVIC + select PINCTRL + select PINCTRL_IMX25 config SOC_IMX27 bool
drivers/pinctrl/Kconfig +8 -0
@@ -98,6 +98,14 @@ config PINCTRL_IMX select PINMUX select PINCONF +config PINCTRL_IMX25 + bool "IMX25 pinctrl driver" + depends on OF + depends on SOC_IMX25 + select PINCTRL_IMX + help + Say Y here to enable the imx25 pinctrl driver + config PINCTRL_IMX35 bool "IMX35 pinctrl driver" depends on OF
drivers/pinctrl/Makefile +1 -0
@@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o +obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
drivers/pinctrl/pinctrl-imx25.c new file +351 -0
351 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v4 6/11 ARM: dts: imx25.dtsi: Add some pinmux pins.
In reply to Denis CarikliUart1, fec, i2c1,esdhc1 and audmux were added.
I also added a label to the iomuxc device node like in:
7b7d672 ARM i.MX dts: Consistently add labels to devicenodes
--- arch/arm/boot/dts/imx25.dtsi | 104 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 103 insertions(+), 1 deletion(-)
arch/arm/boot/dts/imx25.dtsi +103 -1
@@ -174,9 +174,111 @@ status = "disabled"; }; - iomuxc at 43fac000{ + iomuxc: iomuxc at 43fac000 { compatible = "fsl,imx25-iomuxc"; reg = <0x43fac000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0 + MX25_PAD_KPP_COL2__AUD5_TXC 0xe0 + MX25_PAD_KPP_COL1__AUD5_RXD 0xe0 + MX25_PAD_KPP_COL0__AUD5_TXD 0xe0 + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0 + MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0 + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + }; + + lcdc { + pinctrl_lcdc_1: lcdcgrp-1 { + fsl,pins = < + MX25_PAD_LD0__LD0 0x1 + MX25_PAD_LD1__LD1 0x1 + MX25_PAD_LD2__LD2 0x1 + MX25_PAD_LD3__LD3 0x1 + MX25_PAD_LD4__LD4 0x1 + MX25_PAD_LD5__LD5 0x1 + MX25_PAD_LD6__LD6 0x1 + MX25_PAD_LD7__LD7 0x1 + MX25_PAD_LD8__LD8 0x1 + MX25_PAD_LD9__LD9 0x1 + MX25_PAD_LD10__LD10 0x1 + MX25_PAD_LD11__LD11 0x1 + MX25_PAD_LD12__LD12 0x1 + MX25_PAD_LD13__LD13 0x1 + MX25_PAD_LD14__LD14 0x1 + MX25_PAD_LD15__LD15 0x1 + MX25_PAD_GPIO_E__LD16 0x1 + MX25_PAD_GPIO_F__LD17 0x1 + + MX25_PAD_HSYNC__HSYNC 0x80000000 + MX25_PAD_VSYNC__VSYNC 0x80000000 + MX25_PAD_LSCLK__LSCLK 0x80000000 + MX25_PAD_OE_ACD__OE_ACD 0x80000000 + MX25_PAD_CONTRAST__CONTRAST 0x80000000 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + MX25_PAD_UART2_RXD__UART2_RXD 0x80000000 + MX25_PAD_UART2_TXD__UART2_TXD 0x80000000 + MX25_PAD_UART2_RTS__UART2_RTS 0x80000000 + MX25_PAD_UART2_CTS__UART2_CTS 0x80000000 + >; + }; + }; }; audmux at 43fb0000 {
Signature · 1 line
1.7.9.5
PATCH v4 7/11 ARM: dts: i.MX25: Add ssi clocks and DMA events.
In reply to Denis Carikli--- arch/arm/boot/dts/imx25.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
arch/arm/boot/dts/imx25.dtsi +11 -1
@@ -339,6 +339,11 @@ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; + clocks = <&clks 118>; + clock-names = "ipg"; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -369,6 +374,11 @@ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; + clocks = <&clks 117>; + clock-names = "ipg"; + dmas = <&sdma 28 1 0>, + <&sdma 29 1 0>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -539,7 +549,7 @@ #interrupt-cells = <2>; }; - sdma at 53fd4000 { + sdma: sdma at 53fd4000 { compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>;
Signature · 1 line
1.7.9.5
PATCH v4 8/11 ARM: dts: i.MX25: Add sdma script path.
In reply to Denis Carikli--- arch/arm/boot/dts/imx25.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx25.dtsi +1 -0
@@ -556,6 +556,7 @@ clock-names = "ipg", "ahb"; #dma-cells = <3>; interrupts = <34>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; }; wdog at 53fdc000 {
Signature · 1 line
1.7.9.5
PATCH v4 9/11 ARM: dts: imx25.dtsi: Add an alias for the Audio Multiplexer.
In reply to Denis Carikli--- arch/arm/boot/dts/imx25.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx25.dtsi +1 -1
@@ -281,7 +281,7 @@ }; }; - audmux at 43fb0000 { + audmux: audmux at 43fb0000 { compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; reg = <0x43fb0000 0x4000>; status = "disabled";
Signature · 1 line
1.7.9.5
PATCH v4 9/11 ARM: dts: imx25.dtsi: Add an alias for the Audio Multiplexer.
Hello.
On 10/21/2013 01:51 PM, Denis Carikli wrote:
I think alias is something different, defined in the "aliases" node.
You probably mean a label.
Quoted 19 lines
Cc Rob Herring <[email protected]>Cc Pawel Moll <[email protected]>Cc Mark Rutland <[email protected]>Cc Stephen Warren <[email protected]>Cc Ian Campbell <[email protected]>Cc devicetree at vger.kernel.orgCc Sascha Hauer <[email protected]>Cc linux-arm-kernel at lists.infradead.orgCc Eric B?nard <[email protected]>Signed-off-by Denis Carikli <[email protected]>--- arch/arm/boot/dts/imx25.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/imx25.dtsi +0
-0
arch/arm/boot/dts/imx25.dtsi line 284
Quoted 5 lines
arch/arm/boot/dts/imx25.dtsi +1
-1@@ -281,7 +281,7 @@ }; }; - audmux at 43fb0000 { + audmux: audmux at 43fb0000 {
WBR, Sergei
PATCH v4 10/11 ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
In reply to Denis CarikliThe following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Sound.
* CMO-QVGA(With backlight), DVI-VGA and DVI-SVGA displays
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.
--- arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 53 +++++++++ .../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 63 +++++++++++ .../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts | 50 +++++++++ .../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts | 50 +++++++++ .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 116 ++++++++++++++++++++ 5 files changed, 332 insertions(+) create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi new file +53 -0
@@ -0,0 +1,53 @@ +/* + * Copyright 2013 Eukr?a Electromatique <[email protected]> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include "imx25.dtsi" + +/ { + model = "Eukrea CPUIMX25"; + compatible = "eukrea,cpuimx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x4000000>; /* 64M */ + }; +}; + +&fec { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + pcf8563 at 51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +};
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts new file +63 -0
63 lines not on this page · raw message
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts new file +50 -0
50 lines not on this page · raw message
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts new file +50 -0
50 lines not on this page · raw message
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts new file +116 -0
116 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v4 11/11 ARM: imx_v4_v5_defconfig: Enable gpio regulator and gpio button/keyboard.
In reply to Denis CarikliThe eukrea mbimxsd25 has a gpio regulator for enabling its
LCD display, it also has a gpio button.
We enable the respective drivers in order to be able to use theses
features with this configuration.
--- arch/arm/configs/imx_v4_v5_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/imx_v4_v5_defconfig +2 -0
@@ -91,6 +91,7 @@ CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_IMX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y
@@ -118,6 +119,7 @@ CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y
Signature · 1 line
1.7.9.5