ARM: IGEP0033: rename config file to am335x_igep0033.h
PATCH RESEND v3 1/2 ARM: IGEP0033: rename config file to am335x_igep0033.h
From: Javier Martinez Canillas <[email protected]>
There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC.
Since the IGEP COM AQUILA use TI AM335x processors, is better to rename its board config to use this naming scheme.
---
Changes since v2:
- Rebase patch to adapt to new boards.cfg file format.
Changes since v1:
- Fix some issues in the commit changelog pointed out by Enric Balletbo.
boards.cfg | 2 +-
include/configs/{igep0033.h => am335x_igep0033.h} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename include/configs/{igep0033.h => am335x_igep0033.h} (100%)boards.cfg +1 -1
@@ -246,7 +246,7 @@ Active arm arm946es - armltd integrator Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - - Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <[email protected]> Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <[email protected]> -Active arm armv7 am33xx isee igep0033 igep0033 - Enric Balletbo i Serra <[email protected]> +Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <[email protected]> Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <[email protected]> Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <[email protected]> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <[email protected]>
include/configs/am335x_igep0033.h renamed from include/configs/igep0033.h +0 -0
Signature · 1 line
1.8.4.rc3
PATCH RESEND v3 1/2 ARM: IGEP0033: rename config file to am335x_igep0033.h
Quoted 43 lines · Javier Martinez Canillas
From: Javier Martinez Canillas <[email protected]>
There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC.
Since the IGEP COM AQUILA use TI AM335x processors, is better to rename its board config to use this naming scheme.
Signed-off-by Javier Martinez Canillas <[email protected]>---
Changes since v2:
- Rebase patch to adapt to new boards.cfg file format.Changes since v1:
- Fix some issues in the commit changelog pointed out by Enric Balletbo.boards.cfg | 2 +- include/configs/{igep0033.h => am335x_igep0033.h} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename include/configs/{igep0033.h => am335x_igep0033.h} (100%)boards.cfg +1
-1@@ -246,7 +246,7 @@ Active arm arm946es - armltd integrator Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - - Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <[email protected]> Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <[email protected]> -Active arm armv7 am33xx isee igep0033 igep0033 - Enric Balletbo i Serra <[email protected]> +Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <[email protected]> Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <[email protected]> Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <[email protected]> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <[email protected]>include/configs/am335x_igep0033.h renamed from include/configs/igep0033.h +0
-1--
Quoted 2 lines
1.8.4.rc3
Hi Tom,
Any comments on these patches?
Thanks a lot and best regards,
Javier
PATCH RESEND v3 1/2 ARM: IGEP0033: rename config file to am335x_igep0033.h
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 50 lines · Javier Martinez Canillas
Quoted 43 lines · Javier Martinez Canillas
From: Javier Martinez Canillas <[email protected]>
There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC.
Since the IGEP COM AQUILA use TI AM335x processors, is better to rename its board config to use this naming scheme.
Signed-off-by Javier Martinez Canillas <[email protected]>---
Changes since v2:
- Rebase patch to adapt to new boards.cfg file format.Changes since v1:
- Fix some issues in the commit changelog pointed out by Enric Balletbo.boards.cfg | 2 +- include/configs/{igep0033.h => am335x_igep0033.h} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename include/configs/{igep0033.h => am335x_igep0033.h} (100%)boards.cfg +1
-1@@ -246,7 +246,7 @@ Active arm arm946es - armltd integrator Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - - Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <[email protected]> Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <[email protected]> -Active arm armv7 am33xx isee igep0033 igep0033 - Enric Balletbo i Serra <[email protected]> +Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <[email protected]> Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <[email protected]> Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <[email protected]> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <[email protected]>include/configs/am335x_igep0033.h renamed from include/configs/igep0033.h +0
-1--Quoted 2 lines
1.8.4.rc3
Hi Tom,
Quoted 1 line
Any comments on these patches?
Looks good, and I do need to put on my u-boot-ti hat on and collect up patches.
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQIcBAEBAgAGBQJSasl5AAoJENk4IS6UOR1WBtIP+QFpWTpYSlV4n1p7RN7If/SN ctpTuzXUQE0i4ySVM3WE5GgwCbwy3EXvstDEs8bcc9+BPdYXCg+wQ6q2+Vtq6DLK FVwJP6sfW/KqpPQm9M7wgoGLkH/ylBzCjY+O90LpvBN9bx+lACjtfSxix/QzIG4j ra5jjnxGW9t1IG1imrKkot/aVWybed1XiU87IVzctLXEOsO1MJlgwmodvBb4p1HB v0JVKzcZu9JmYd/tYiMcokUpa/CzfEso6WjDX6wpZZzMQgM1ktZHI6Rqfx8i9hXk wiLfddSH2J8XLZ2zV8ztU/zR05MoPQTGX7poc/Pf8IPjsQKf17hGsljS4jdCR0/T oui7U9kKDbAb3fqDSW+nEsTxVY+YJxC5lp7YE0BPs8YZ2KI4k1+9XfMd0U8oVVM5 k8QnlIMhYfBqIlCmMMoMzcxN6OvzQc2u+rrCHjZvf8YpzaXhXcS7lDXSxTzowcLG Y0oDIiiyg8BhdwMK+OlgqtrJ47VIb+G2/GGlCqUQHz6FCvX19T1asYuyYcr4tbC2 U9OK31FdlYvRPD5uUy7VbYxE2qmzdmKCQhM5pvWb5/Md5++l2/Vq9Fq/Eg3QNGJD bdTWxsqOwVvHi5wM9KQcCczv7/GJxCeQlSrVkeabnlaWSiqZvfe5iwZRdaz9E3Rq FrlRthxunLf80VDy0Cxu
=I7L2
-----END PGP SIGNATURE-----
PATCH RESEND v3 2/2 OMAP3: igep00x0: rename config file to omap3_igep00x0.h
In reply to Javier Martinez CanillasFrom: Javier Martinez Canillas <[email protected]>
There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC.
Since the IGEPv2 board and the IGEP COM Module use a TI OMAP35xx/DM37xx processor, is better to rename its board config to use this naming scheme.
---
Changes since v2:
- Rebase patch to adapt to new boards.cfg file format.
Changes since v1:
- Fix some issues in the commit changelog pointed out by Enric Balletbo.
boards.cfg | 10 +++++-----
include/configs/{igep00x0.h => omap3_igep00x0.h} | 0
2 files changed, 5 insertions(+), 5 deletions(-)
rename include/configs/{igep00x0.h => omap3_igep00x0.h} (100%)boards.cfg +5 -5
@@ -311,11 +311,11 @@ Active arm armv7 omap3 comelit dig297 Active arm armv7 omap3 compulab cm_t35 cm_t35 - Igor Grinberg <[email protected]> Active arm armv7 omap3 corscience tricorder tricorder - Thomas Weber <[email protected]> Active arm armv7 omap3 htkw mcx mcx - Ilya Yanok <[email protected]> -Active arm armv7 omap3 isee igep00x0 igep0020 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> -Active arm armv7 omap3 isee igep00x0 igep0020_nand igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND - -Active arm armv7 omap3 isee igep00x0 igep0030 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> -Active arm armv7 omap3 isee igep00x0 igep0030_nand igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND - -Active arm armv7 omap3 isee igep00x0 igep0032 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> +Active arm armv7 omap3 isee igep00x0 omap3_igep0020 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> +Active arm armv7 omap3 isee igep00x0 omap3_igep0020_nand omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND - +Active arm armv7 omap3 isee igep00x0 omap3_igep0030 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> +Active arm armv7 omap3 isee igep00x0 omap3_igep0030_nand omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND - +Active arm armv7 omap3 isee igep00x0 omap3_igep0032 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND Enric Balletbo i Serra <[email protected]> Active arm armv7 omap3 logicpd am3517evm am3517_evm - Vaibhav Hiremath <[email protected]> Active arm armv7 omap3 logicpd omap3som omap3_logic - Peter Barada <[email protected]> Active arm armv7 omap3 logicpd zoom1 omap3_zoom1 - Nishanth Menon <[email protected]>
include/configs/omap3_igep00x0.h renamed from include/configs/igep00x0.h +0 -0
Signature · 1 line
1.8.4.rc3