ARM: imx: replace imx6q_restart() with mxc_restart()
Subsystems (3)
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
The imx6q_restart() works fine with normal reboot but will run into problem with emergency reboot like sysrq-b. In that case, of_iomap() gets called from interrupt context and hence triggers the BUG_ON in __get_vm_area_node().
Actually, since commit c1e31d1 (ARM: imx: create mxc_arch_reset_init_dt() for DT boot), imx6q/dl should try to use mxc_restart() by calling mxc_arch_reset_init_dt() beforehand, where things like of_iomap() can be done.
The patch updates mxc_restart() a little bit to get it work for imx6q/dl and kill imx6q_restart() completely.
--- arch/arm/mach-imx/common.h | 4 ++++ arch/arm/mach-imx/mach-imx6q.c | 35 +++-------------------------------- arch/arm/mach-imx/system.c | 5 +++++ 3 files changed, 12 insertions(+), 32 deletions(-)
arch/arm/mach-imx/common.h +4 -0
@@ -130,7 +130,11 @@ static inline void imx_smp_prepare(void) {}static inline void imx_scu_standby_enable (void ) {}#endif extern void imx_src_init (void ); +#ifdef CONFIG_HAVE_IMX_SRC extern void imx_src_prepare_restart (void ); +#else +extern inline void imx_src_prepare_restart (void ) {} +#endif extern void imx_gpc_init (void );extern void imx_gpc_pre_suspend (void );extern void imx_gpc_post_resume (void );
arch/arm/mach-imx/mach-imx6q.c +3 -32
@@ -15,7 +15,6 @@#include <linux/clkdev.h> #include <linux/clocksource.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h>
@@ -40,36 +39,6 @@#include "cpuidle.h" #include "hardware.h" -static void imx6q_restart (enum reboot_mode mode,const char *cmd) -{ -struct device_node *np; -void __iomem *wdog_base; - - np =of_find_compatible_node (NULL ,NULL ,"fsl,imx6q-wdt" ); - wdog_base =of_iomap (np,0 ); -if (!wdog_base) - goto soft; - -imx_src_prepare_restart (); - -/* enable wdog */ -writew_relaxed (1 <<2 , wdog_base); -/* write twice to ensure the request will not get ignored */ -writew_relaxed (1 <<2 , wdog_base); - -/* wait for reset to assert ... */ -mdelay (500 ); - -pr_err ("Watchdog reset failed to assert reset\n" ); - -/* delay to allow the serial port to show the message */ -mdelay (50 ); - -soft: -/* we'll take a jump through zero as a poor second */ -soft_restart (0 ); -} -/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup (struct phy_device *phydev) {
@@ -166,6 +135,8 @@ static void __init imx6q_init_machine(void) {struct device *parent; +mxc_arch_reset_init_dt (); + parent =imx_soc_device_init ();if (parent ==NULL )pr_warn ("failed to initialize soc device\n" );
@@ -293,5 +264,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart,MACHINE_END
arch/arm/mach-imx/system.c +5 -0
@@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) {unsigned int wcr_enable; +if (cpu_is_imx6q () ||cpu_is_imx6dl ()) +imx_src_prepare_restart (); +if (wdog_clk)clk_enable (wdog_clk);
@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)/* Assert SRS signal */ __raw_writew (wcr_enable, wdog_base); +/* write twice to ensure the request will not get ignored */ +__raw_writew (wcr_enable, wdog_base);/* wait for reset to assert... */ mdelay (500 );
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 10 lines · Shawn Guo
The
imx6q_restart()works fine with normal reboot but will run into problem with emergency reboot like sysrq-b. In that case,of_iomap()gets called from interrupt context and hence triggers theBUG_ONin__get_vm_area_node().Actually, since commit c1e31d1 (ARM: imx: create
mxc_arch_reset_init_dt()for DT boot), imx6q/dl should try to usemxc_restart()by callingmxc_arch_reset_init_dt()beforehand, where things likeof_iomap()can be done.
Quoted 5 lines
The patch updates
mxc_restart()a little bit to get it work for imx6q/dl and killimx6q_restart()completely.Reported-by Nathan Lynch <[email protected]>Signed-off-by Shawn Guo <[email protected]>
Thanks Shawn, works for me. One minor comment on the patch below.
arch/arm/mach-imx/common.h static inline void imx_smp_prepare(void) {} · line 136
Quoted 12 lines
arch/arm/mach-imx/common.h +3
-0@@ -130,7 +130,11 @@ static inline void imx_smp_prepare(void) {}static inline void imx_scu_standby_enable (void ) {}#endif extern void imx_src_init (void ); +#ifdef CONFIG_HAVE_IMX_SRC extern void imx_src_prepare_restart (void ); +#else +extern inline void imx_src_prepare_restart (void ) {}
Should be static inline?
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 10 lines · Nathan Lynch
arch/arm/mach-imx/common.h static inline void imx_smp_prepare(void) {} · line 136
Quoted 8 lines
arch/arm/mach-imx/common.h +3
-0@@ -130,7 +130,11 @@ static inline void imx_smp_prepare(void) {}static inline void imx_scu_standby_enable (void ) {}#endif extern void imx_src_init (void ); +#ifdef CONFIG_HAVE_IMX_SRC extern void imx_src_prepare_restart (void ); +#else +extern inline void imx_src_prepare_restart (void ) {}Should be static inline?
Ah, yes. That's a copy-paste error. Thanks for spotting it, Nathan. I just fixed it here.
Shawn
A message that is not in the archive (sent off-list or not yet received): 857E9EDCA6C0904DB3357321AA9123EB62506837@NA-MBX-01.mgc.mentorg.com
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Hi Shawn
Quoted 107 lines
The
imx6q_restart()works fine with normal reboot but will run into problem with emergency reboot like sysrq-b. In that case,of_iomap()gets called from interrupt context and hence triggers theBUG_ONin__get_vm_area_node().Actually, since commit c1e31d1 (ARM: imx: create
mxc_arch_reset_init_dt()for DT boot), imx6q/dl should try to usemxc_restart()by callingmxc_arch_reset_init_dt()beforehand, where things likeof_iomap()can be done.The patch updates
mxc_restart()a little bit to get it work for imx6q/dl and killimx6q_restart()completely.Reported-by Nathan Lynch <[email protected]>Signed-off-by Shawn Guo <[email protected]>--- arch/arm/mach-imx/common.h | 4 ++++ arch/arm/mach-imx/mach-imx6q.c | 35 +++-------------------------------- arch/arm/mach-imx/system.c | 5 +++++ 3 files changed, 12 insertions(+), 32 deletions(-)arch/arm/mach-imx/common.h +3
-0@@ -130,7 +130,11 @@ static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif extern void imx_src_init(void); +#ifdef CONFIG_HAVE_IMX_SRC extern void imx_src_prepare_restart (void ); +#else +extern inline void imx_src_prepare_restart (void ) {}#endif extern void imx_gpc_init (void );extern void imx_gpc_pre_suspend (void );extern void imx_gpc_post_resume (void );arch/arm/mach-imx/mach-imx6q.c +3
-31@@ -15,7 +15,6 @@#include <linux/clkdev.h> #include <linux/clocksource.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> @@ -40,36 +39,6 @@#include "cpuidle.h" #include "hardware.h" -static void imx6q_restart(enum reboot_mode mode, const char *cmd) -{ -struct device_node *np; -void __iomem *wdog_base; - - np =of_find_compatible_node (NULL ,NULL ,"fsl,imx6q-wdt" ); - wdog_base =of_iomap (np,0 ); -if (!wdog_base) - goto soft; - -imx_src_prepare_restart (); - -/* enable wdog */ -writew_relaxed (1 <<2 , wdog_base); -/* write twice to ensure the request will not get ignored */ -writew_relaxed (1 <<2 , wdog_base); - -/* wait for reset to assert ... */ -mdelay (500 ); - -pr_err ("Watchdog reset failed to assert reset\n" ); - -/* delay to allow the serial port to show the message */ -mdelay (50 ); - -soft: -/* we'll take a jump through zero as a poor second */ -soft_restart (0 ); -} - /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { @@ -166,6 +135,8 @@ static void __init imx6q_init_machine(void) {struct device *parent; +mxc_arch_reset_init_dt (); + parent =imx_soc_device_init ();if (parent ==NULL ) pr_warn("failed to initialize soc device\n"); @@ -293,5 +264,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart,MACHINE_END arch/arm/mach-imx/system.c +5
-1@@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) {unsigned int wcr_enable; +if (cpu_is_imx6q () ||cpu_is_imx6dl ()) +imx_src_prepare_restart (); +if (wdog_clk)clk_enable (wdog_clk);@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)/* Assert SRS signal */ __raw_writew (wcr_enable, wdog_base); +/* write twice to ensure the request will not get ignored */ +__raw_writew (wcr_enable, wdog_base);/* wait for reset to assert... */ mdelay (500 ); --
Quoted 1 line
1.7.9.5
By backporting your patch to our 3.5 kernel,
I can confirm the original issue reported by Nathan is fixed but with your patch, sometimes "echo b > /proc/sysrq-trigger" may cause system hang.
The successful case:
root at mx6q:~# echo b > /proc/sysrq-trigger
[ 23.038806] SysRq : Resetting [ 23.042081] CPU1: stopping [ 23.044832] Backtrace: [ 23.047361] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 23.055839] r6:00000000 r5:00000006 r4:00000001 r3:600f0193 [ 23.061620] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 23.069759] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 23.078236] r7:ac0a1fa4 r6:804f8500 r5:f4000100 r4:ac0a1f70 [ 23.084022] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 23.092330] Exception stack(0xac0a1f70 to 0xac0a1fb8) [ 23.097425] 1f60: 00000001 800f0093 ac0a1fa0 00000000 [ 23.105649] 1f80: ac0a0000 803a5c4c 10c0387d 80538444 1000406a 412fc09a 00000000 ac0a1fc4 [ 23.113869] 1fa0: ac0a1fc8 ac0a1fb8 8000e700 8000e704 600f0013 ffffffff [ 23.120523] r6:ffffffff r5:600f0013 r4:8000e704 r3:8000e700 [ 23.126308] [<8000e6d8>] (default_idle+0x0/0x34) from [<8000e92c>] (cpu_idle+0xa8/0xf8) [ 23.134366] [<8000e884>] (cpu_idle+0x0/0xf8) from [<80393e14>] (secondary_start_kernel+0xf8/0x118) [ 23.143364] r5:00000001 r4:8050b490 [ 23.147028] [<80393d1c>] (secondary_start_kernel+0x0/0x118) from [<10393854>] (0x10393854) [ 23.155332] r5:00000015 r4:3c08c06a [ 23.158988] CPU2: stopping [ 23.161738] Backtrace: [ 23.164257] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 23.172735] r6:00000000 r5:00000006 r4:00000002 r3:60000193 [ 23.178517] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 23.186655] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 23.195132] r7:ac0a3fa4 r6:804f8500 r5:f4000100 r4:ac0a3f70 [ 23.200915] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 23.209221] Exception stack(0xac0a3f70 to 0xac0a3fb8) [ 23.214317] 3f60: 00000001 80000093 ac0a3fa0 00000000 [ 23.222541] 3f80: ac0a2000 803a5c4c 10c0387d 80538444 1000406a 412fc09a 00000000 ac0a3fc4 [ 23.230763] 3fa0: ac0a3fc8 ac0a3fb8 8000e700 8000e704 60000013 ffffffff [ 23.237417] r6:ffffffff r5:60000013 r4:8000e704 r3:8000e700 [ 23.243199] [<8000e6d8>] (default_idle+0x0/0x34) from [<8000e92c>] (cpu_idle+0xa8/0xf8) [ 23.251253] [<8000e884>] (cpu_idle+0x0/0xf8) from [<80393e14>] (secondary_start_kernel+0xf8/0x118) [ 23.260253] r5:00000002 r4:8050b490 [ 23.263913] [<80393d1c>] (secondary_start_kernel+0x0/0x118) from [<10393854>] (0x10393854) [ 23.272218] r5:00000015 r4:3c08c06a [ 23.275872] CPU3: stopping [ 23.278622] Backtrace: [ 23.281142] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 23.289620] r6:00000000 r5:00000006 r4:00000003 r3:600f0193 [ 23.295400] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 23.303539] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 23.312016] r7:ac0a9fa4 r6:804f8500 r5:f4000100 r4:ac0a9f70 [ 23.317800] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 23.326106] Exception stack(0xac0a9f70 to 0xac0a9fb8) [ 23.331201] 9f60: 00000001 800f0093 ac0a9fa0 00000000 [ 23.339425] 9f80: ac0a8000 803a5c4c 10c0387d 80538444 1000406a 412fc09a 00000000 ac0a9fc4 [ 23.347647] 9fa0: ac0a9fc8 ac0a9fb8 8000e700 8000e704 600f0013 ffffffff [ 23.354301] r6:ffffffff r5:600f0013 r4:8000e704 r3:8000e700 [ 23.360084] [<8000e6d8>] (default_idle+0x0/0x34) from [<8000e92c>] (cpu_idle+0xa8/0xf8) [ 23.368137] [<8000e884>] (cpu_idle+0x0/0xf8) from [<80393e14>] (secondary_start_kernel+0xf8/0x118) [ 23.377136] r5:00000003 r4:8050b490 [ 23.380798] [<80393d1c>] (secondary_start_kernel+0x0/0x118) from [<10393854>] (0x10393854) [ 23.389102] r5:00000015 r4:3c08c06a
[ 0.000254] [ 0.001733] U-Boot 2012.07-00103-g171bd0a (Sep 24 2013 - 20:19:22) [ 0.007910] [ 0.009441] CPU: Freescale i.MX6Q rev1.0 at 792 MHz [ 0.014468] Reset cause: WDOG [ 0.017412] Board: MX6Q-Sabre Lite [ 0.020827] Board ID: 0x0000 (#0) [ 0.024140] DRAM: 1 GiB [ 0.037266] MMC: FSL_SDHC: 0, FSL_SDHC: 1 [ 0.133608] In: serial [ 0.136144] Out: serial [ 0.138755] Err: serial [ 0.141381] Net: FEC [ 0.170074] Hit any key to stop autoboot: 0 [ 0.614926] MX6QSABRELITE U-Boot >
The failure case:
root at mx6q:~# echo b > /proc/sysrq-trigger
[ 28.509913] SysRq : Resetting [ 28.513187] CPU1: stopping [ 28.515937] Backtrace: [ 28.518466] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 28.526946] r6:00000000 r5:00000006 r4:00000001 r3:600f0193 [ 28.532723] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 28.540860] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 28.549339] r7:ac0a1fa4 r6:804f8500 r5:f4000100 r4:ac0a1f70 [ 28.555124] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 28.563430] Exception stack(0xac0a1f70 to 0xac0a1fb8) [ 28.568526] 1f60: 00000001 800f0093 ac0a1fa0 00000000 [ 28.576749] 1f80: ac0a0000 803a5c4c 10c0387d 80538444 1000406a 412fc09a 00000000 ac0a1fc4 [ 28.584970] 1fa0: ac0a1fc8 ac0a1fb8 8000e700 8000e704 600f0013 ffffffff [ 28.591624] r6:ffffffff r5:600f0013 r4:8000e704 r3:8000e700 [ 28.597408] [<8000e6d8>] (default_idle+0x0/0x34) from [<8000e92c>] (cpu_idle+0xa8/0xf8) [ 28.605467] [<8000e884>] (cpu_idle+0x0/0xf8) from [<80393e14>] (secondary_start_kernel+0xf8/0x118) [ 28.614466] r5:00000001 r4:8050b490 [ 28.618129] [<80393d1c>] (secondary_start_kernel+0x0/0x118) from [<10393854>] (0x10393854) [ 28.626433] r5:00000015 r4:3c08c06a [ 28.630089] CPU2: stopping [ 28.632839] Backtrace: [ 28.635358] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 28.643836] r6:00000000 r5:00000006 r4:00000002 r3:600f0193 [ 28.649617] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 28.657755] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 28.666233] r7:ac0a3fa4 r6:804f8500 r5:f4000100 r4:ac0a3f70 [ 28.672017] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 28.680323] Exception stack(0xac0a3f70 to 0xac0a3fb8) [ 28.685419] 3f60: 00000001 800f0093 ac0a3fa0 00000000 [ 28.693643] 3f80: ac0a2000 803a5c4c 10c0387d 80538444 1000406a 412fc09a 00000000 ac0a3fc4 [ 28.701865] 3fa0: ac0a3fc8 ac0a3fb8 8000e700 8000e704 600f0013 ffffffff [ 28.708519] r6:ffffffff r5:600f0013 r4:8000e704 r3:8000e700 [ 28.714300] [<8000e6d8>] (default_idle+0x0/0x34) from [<8000e92c>] (cpu_idle+0xa8/0xf8) [ 28.722353] [<8000e884>] (cpu_idle+0x0/0xf8) from [<80393e14>] (secondary_start_kernel+0xf8/0x118) [ 28.731352] r5:00000002 r4:8050b490 [ 28.735013] [<80393d1c>] (secondary_start_kernel+0x0/0x118) from [<10393854>] (0x10393854) [ 28.743318] r5:00000015 r4:3c08c06a [ 28.746973] CPU0: stopping [ 28.749724] Backtrace: [ 28.752247] [<800114d4>] (dump_backtrace+0x0/0x108) from [<80396fcc>] (dump_stack+0x18/0x1c) [ 28.760725] r6:00000000 r5:00000006 r4:00000000 r3:600f0193 [ 28.766505] [<80396fb4>] (dump_stack+0x0/0x1c) from [<80012a68>] (handle_IPI+0xfc/0x170) [ 28.774643] [<8001296c>] (handle_IPI+0x0/0x170) from [<800084e0>] (gic_handle_irq+0x60/0x68) [ 28.783120] r7:804f1e84 r6:804f8500 r5:f4000100 r4:804f1e50 [ 28.788903] [<80008480>] (gic_handle_irq+0x0/0x68) from [<8039e000>] (__irq_svc+0x40/0x70) [ 28.797209] Exception stack(0x804f1e50 to 0x804f1e98) [ 28.802305] 1e40: 80ecb440 804fb3b0 804f1ea8 00000000 [ 28.810529] 1e60: ac1c3400 ac6ea8c0 80ecb440 ac1c3400 00000002 00000000 ac1c3400 804f1ea4 [ 28.818751] 1e80: 804f1ea8 804f1e98 8004ba38 8039d5fc 600f0013 ffffffff [ 28.825405] r6:ffffffff r5:600f0013 r4:8039d5fc r3:8004ba38 [ 28.831191] [<8039d5d8>] (_raw_spin_unlock_irq+0x0/0x4c) from [<8004ba38>] (finish_task_switch+0x58/0x130) [ 28.840892] [<8004b9e0>] (finish_task_switch+0x0/0x130) from [<8039c700>] (__schedule+0x5a4/0x714) [ 28.849890] r8:804ef440 r7:ac1c3400 r6:804f0000 r5:804f8fc0 r4:804ef440 r3:ffffffff [ 28.857915] [<8039c15c>] (__schedule+0x0/0x714) from [<8039c9fc>] (schedule+0x8c/0x90) [ 28.865880] [<8039c970>] (schedule+0x0/0x90) from [<8039ccc4>] (schedule_preempt_disabled+0x18/0x24) [ 28.875059] [<8039ccac>] (schedule_preempt_disabled+0x0/0x24) from [<8000e964>] (cpu_idle+0xe0/0xf8) [ 28.884241] [<8000e884>] (cpu_idle+0x0/0xf8) from [<803896e4>] (rest_init+0x74/0x8c) [ 28.892024] r5:805380c0 r4:00000002 [ 28.895693] [<80389670>] (rest_init+0x0/0x8c) from [<804c3acc>] (start_kernel+0x2c8/0x320) [ 28.903998] r4:804f8dd8 r3:60000153 [ 28.907658] [<804c3804>] (start_kernel+0x0/0x320) from [<10008044>] (0x10008044) [ 28.915094] r8:1000406a r7:804fc214 r6:804e6ae0 r5:804f84d8 r4:10c5387d
the difference between successful "echo b > /proc/sysrq-trigger" reboot and the failure one is:
whether CPU0 is firstly stopped or not
Do you have any idea?
Quoted 8 lines
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thanks,
Jiada
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 3 lines · jiada
the difference between successful "echo b >
/proc/sysrq-trigger" reboot and the failure one is:
whether CPU0 is firstly stopped or not
Do you have commit a985941 (kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()) on your 3.5 kernel. The commit can be found on 3.5.7 kernel.
Shawn
A message that is not in the archive (sent off-list or not yet received): 857E9EDCA6C0904DB3357321AA9123EB62506BEA@NA-MBX-01.mgc.mentorg.com
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Hi Shawn
Quoted 10 lines · Jiada (ESD)
Quoted 3 lines · jiada
the difference between successful "echo b >
/proc/sysrq-trigger" reboot and the failure one is:
whether CPU0 is firstly stopped or notDo you have commit a985941 (
kernel/sys.c: calldisable_nonboot_cpus()inkernel_restart()) on your 3.5 kernel. The commit can be found on 3.5.7 kernel.Shawn
currently my kernel/sys.c is at
f36854c: reboot: rigrate shutdown/reboot to boot cpu which means I have your commit: a985941
I tried to checkout upstream kernel at commit: f36854c
even without your "ARM: imx: replace imx6q_restart() with mxc_restart()" patch
I can reproduce system hang issue by "echo b > /proc/sysrq-trigger"
Thanks,
Jiada
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 4 lines · jiada
I tried to checkout upstream kernel at commit: f36854c even without your "ARM: imx: replace
imx6q_restart()withmxc_restart()" patch
I can reproduce system hang issue by "echo b >/proc/sysrq-trigger"
Since the patch hasn't hit upstream tree, you meant you can reproduce the issue on linux-next or my for-next branch? What's the reproducing rate? I ran a few iterations but did not hit it.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Hi Shawn
Quoted 6 lines · Shawn Guo
Quoted 4 lines · jiada
I tried to checkout upstream kernel at commit: f36854c even without your "ARM: imx: replace
imx6q_restart()withmxc_restart()" patch
I can reproduce system hang issue by "echo b >/proc/sysrq-trigger"
Quoted 6 lines
Since the patch hasn't hit upstream tree, you meant you can reproduce the issue on linux-next or my for-next branch? What's the reproducing rate? I ran a few iterations but did not hit it.
Shawn
as per discussion locally, when do you think you will post the fix patch for the system hang I observed?
I would like to test for your patch, and then pull it to my kernel.
Thanks,
Jiada
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 13 lines · jiada
Hi Shawn
Quoted 10 lines · Shawn Guo
Quoted 4 lines · jiada
I tried to checkout upstream kernel at commit: f36854c even without your "ARM: imx: replace
imx6q_restart()withmxc_restart()" patch
I can reproduce system hang issue by "echo b >/proc/sysrq-trigger"Since the patch hasn't hit upstream tree, you meant you can reproduce the issue on linux-next or my for-next branch? What's the reproducing rate? I ran a few iterations but did not hit it.
Quoted 6 lines
Quoted 2 lines
Shawn
as per discussion locally, when do you think you will post the fix patch for the system hang I observed?
I would like to test for your patch, and then pull it to my kernel.
I will do it today.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
In reply to jiadaQuoted 3 lines · jiada
as per discussion locally, when do you think you will post the fix patch for the system hang I observed?
I would like to test for your patch, and then pull it to my kernel.
Sorry, Jiada. After another closer look at the fix I provided before, it's not correct, because emergency_restart() is a function that is safe to call in interrupt context, while migrate_to_reboot_cpu() is not. That said, we cannot call migrate_to_reboot_cpu() in emergency_restart() at all.
I just found a more easier fix at platform level. The following is what you need to do on your 3.5 kernel.
1. Apply the following change
2. Remove imx_src_prepare_restart() from imx6q_restart().
I will send a patch against the latest kernel.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Hi
Quoted 14 lines · Shawn Guo
Quoted 3 lines · jiada
as per discussion locally, when do you think you will post the fix patch for the system hang I observed?
I would like to test for your patch, and then pull it to my kernel.Sorry, Jiada. After another closer look at the fix I provided before, it's not correct, because
emergency_restart()is a function that is safe to call in interrupt context, whilemigrate_to_reboot_cpu()is not. That said, we cannot callmigrate_to_reboot_cpu()inemergency_restart()at all.I just found a more easier fix at platform level. The following is what you need to do on your 3.5 kernel.
Quoted 8 lines
1. Apply the following change
2. Remove
imx_src_prepare_restart()fromimx6q_restart().I will send a patch against the latest kernel.
Thanks Shawn, I have verified with these two changes, system reboot by "echo b > /proc/sysrq-trigger" works for me.
Quoted 2 lines
Shawn
Thanks,
Jiada
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 7 lines · jiada
Hi
Quoted 4 lines · Shawn Guo
1. Apply the following change
Quoted 7 lines
Quoted 4 lines
2. Remove
imx_src_prepare_restart()fromimx6q_restart().I will send a patch against the latest kernel.
Thanks Shawn, I have verified with these two changes, system reboot by "echo b >
/proc/sysrq-trigger" works for me.
The test you really want to do is a reboot via serial console: <break> b. That's definitely the one which will get you if your restart handler has anything in it which sleeps. This will definitely call the restart handler from IRQ context.
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 4 lines · Russell King - ARM Linux
The test you really want to do is a reboot via serial console: <break> b. That's definitely the one which will get you if your restart handler has anything in it which sleeps. This will definitely call the restart handler from IRQ context.
Yea, I tested it.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
In reply to Russell King - ARM LinuxHi
Quoted 12 lines · Russell King - ARM Linux
Quoted 11 lines · jiada
Hi
Quoted 8 lines · Shawn Guo
1. Apply the following change
2. Remove
imx_src_prepare_restart()fromimx6q_restart().I will send a patch against the latest kernel.
Quoted 9 lines
Quoted 3 lines
Thanks Shawn, I have verified with these two changes, system reboot by "echo b >
/proc/sysrq-trigger" works for me.The test you really want to do is a reboot via serial console: <break> b. That's definitely the one which will get you if your restart handler has anything in it which sleeps. This will definitely call the restart handler from IRQ context.
Yes, I tested both "echo b > /proc/sysrq-trigger" and console: <break> b reboot, but with out this fix patch, previously I saw problem when reboot by "echo b > /proc/sysrq-trigger".
with this fix patch, both way work fine.
Thanks,
Jiada
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
In reply to Shawn GuoHi,
Looks reasonable overall but one question:
Quoted 15 lines · Shawn Guo
arch/arm/mach-imx/system.c +3
-0@@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) {unsigned int wcr_enable; +if (cpu_is_imx6q () ||cpu_is_imx6dl ()) +imx_src_prepare_restart (); +if (wdog_clk)clk_enable (wdog_clk);
arch/arm/mach-imx/system.c void mxc_restart(enum reboot_mode mode, const char *cmd) · line 62
Quoted 8 lines
arch/arm/mach-imx/system.c +2
-0@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)/* Assert SRS signal */ __raw_writew (wcr_enable, wdog_base); +/* write twice to ensure the request will not get ignored */ +__raw_writew (wcr_enable, wdog_base);/* wait for reset to assert... */ mdelay (500 );
"will not get ignored" seems like an odd choice of words here. What's the actual purpose of the double write? Does some versions of the hardware ignore the first write, or is it that you need to make sure that the write has reached the hardware block for some other reason?
I came across this patch in your pull request -- I will merge the branch anyway but I'd like to get the above answered and fixed up later for clarification if needed.
-Olof
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 7 lines · Olof Johansson
Quoted 7 lines
arch/arm/mach-imx/system.c +2
-0@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)/* Assert SRS signal */ __raw_writew (wcr_enable, wdog_base); +/* write twice to ensure the request will not get ignored */ +__raw_writew (wcr_enable, wdog_base);
Quoted 7 lines
arch/arm/mach-imx/system.c void mxc_restart(enum reboot_mode mode, const char *cmd) · line 62
Quoted 2 lines
arch/arm/mach-imx/system.c +0
-0/* wait for reset to assert... */ mdelay (500 );"will not get ignored" seems like an odd choice of words here. What's the actual purpose of the double write? Does some versions of the hardware ignore the first write, or is it that you need to make sure that the write has reached the hardware block for some other reason?
Oh, you got it. We're hiding an imx6q hardware defect here. Most of the time, a single write will just work on imx6q, but there is a chance that the first write could be missed by WDOG SRC sampling logic. I chose to add it unconditionally here to save a target check since a redundant write shouldn't be so harmful for other targets.
Quoted 3 lines
I came across this patch in your pull request -- I will merge the branch anyway but I'd like to get the above answered and fixed up later for clarification if needed.
When the code was originally written in imx6q_restart(), there was no formal errata for this defect. But now there is, see ERR004346 (WDOG:
WDOG SRS bit requires to be written twice) in Chip Errata for i.MX6Q below.
http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf?fpsp=1
I will send a follow-up patch to add necessary clarification.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 16 lines · Shawn Guo
Quoted 7 lines · Olof Johansson
Quoted 7 lines
arch/arm/mach-imx/system.c +2
-0@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)/* Assert SRS signal */ __raw_writew (wcr_enable, wdog_base); +/* write twice to ensure the request will not get ignored */ +__raw_writew (wcr_enable, wdog_base);Quoted 7 lines
arch/arm/mach-imx/system.c void mxc_restart(enum reboot_mode mode, const char *cmd) · line 62
Quoted 2 lines
arch/arm/mach-imx/system.c +0
-0/* wait for reset to assert... */ mdelay (500 );"will not get ignored" seems like an odd choice of words here. What's the actual purpose of the double write? Does some versions of the hardware ignore the first write, or is it that you need to make sure that the write has reached the hardware block for some other reason?
Quoted 5 lines
Oh, you got it. We're hiding an imx6q hardware defect here. Most of the time, a single write will just work on imx6q, but there is a chance that the first write could be missed by WDOG SRC sampling logic. I chose to add it unconditionally here to save a target check since a redundant write shouldn't be so harmful for other targets.
Ok, sounds good.
Quoted 4 lines
Quoted 3 lines
I came across this patch in your pull request -- I will merge the branch anyway but I'd like to get the above answered and fixed up later for clarification if needed.
Quoted 8 lines
When the code was originally written in
imx6q_restart(), there was no formal errata for this defect. But now there is, see ERR004346 (WDOG:
WDOG SRS bit requires to be written twice) in Chip Errata for i.MX6Q below.http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf?fpsp=1
I will send a follow-up patch to add necessary clarification.
Great. Just a quick reference to the errata should be sufficient.
By the way, the errata document says that you must write it twice within one 32kHz clock period. You might want to write it three times just in case two of them happen to straddle that period by pure bad luck. I'm guessing it's rare enough that you haven't been able to reproduce it though.
-Olof
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 5 lines · Olof Johansson
By the way, the errata document says that you must write it twice within one 32kHz clock period. You might want to write it three times just in case two of them happen to straddle that period by pure bad luck. I'm guessing it's rare enough that you haven't been able to reproduce it though.
With CPU running at hundred MHz, two writes in the row should not straddle one 32kHz clock period - 31.25 us.
Shawn
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Hi,
Quoted 10 lines · Shawn Guo
Quoted 5 lines · Olof Johansson
By the way, the errata document says that you must write it twice within one 32kHz clock period. You might want to write it three times just in case two of them happen to straddle that period by pure bad luck. I'm guessing it's rare enough that you haven't been able to reproduce it though.
With CPU running at hundred MHz, two writes in the row should not straddle one 32kHz clock period - 31.25 us.
But they still may end up in adjacent periods of the 32MHz clock. If both writes have to happen within the same period of the clock, the third write may be necessary to guarantee this.
Lothar Wa?mann
Signature · 9 lines
___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 10 lines · Lothar Wa?mann
Hi,
Quoted 7 lines · Shawn Guo
Quoted 5 lines · Olof Johansson
By the way, the errata document says that you must write it twice within one 32kHz clock period. You might want to write it three times just in case two of them happen to straddle that period by pure bad luck. I'm guessing it's rare enough that you haven't been able to reproduce it though.
Quoted 6 lines
Quoted 3 lines
With CPU running at hundred MHz, two writes in the row should not straddle one 32kHz clock period - 31.25 us.
But they still may end up in adjacent periods of the 32MHz clock. If both writes have to happen within the same period of the clock, the third write may be necessary to guarantee this.
Yes, that is correct to the description given. It's also rather vague in that it doesn't describe the mechanism for the bug, so we can't say for certain whether two or three writes are sufficient.
If the problem is to do with a write too close to the 32kHz clock edge, then two writes should solve it (if the first is too close, the second one will likely be afterwards). If the problem is something else, then three writes would be sensible.
As we don't have this information, I'd suggest using three just to be sure as Lothar suggests.
PATCH 1/1 ARM: imx: replace imx6q_restart() with mxc_restart()
Quoted 22 lines · Russell King - ARM Linux
Quoted 10 lines · Lothar Wa?mann
Hi,
Quoted 7 lines · Shawn Guo
Quoted 5 lines · Olof Johansson
By the way, the errata document says that you must write it twice within one 32kHz clock period. You might want to write it three times just in case two of them happen to straddle that period by pure bad luck. I'm guessing it's rare enough that you haven't been able to reproduce it though.
Quoted 6 lines
Quoted 3 lines
With CPU running at hundred MHz, two writes in the row should not straddle one 32kHz clock period - 31.25 us.
But they still may end up in adjacent periods of the 32MHz clock. If both writes have to happen within the same period of the clock, the third write may be necessary to guarantee this.
Yes, that is correct to the description given. It's also rather vague in that it doesn't describe the mechanism for the bug, so we can't say for certain whether two or three writes are sufficient.
Quoted 7 lines
If the problem is to do with a write too close to the 32kHz clock edge, then two writes should solve it (if the first is too close, the second one will likely be afterwards). If the problem is something else, then three writes would be sensible.
As we don't have this information, I'd suggest using three just to be sure as Lothar suggests.
Yea, it seems that I've missed Olof's point at the first place. Thank you and Lothar for clarification, and I will add a third write in the follow-up patch, so that we can be safe for sure.
Shawn