Provide a mechanism to avoid using #ifdef everywhere
v4 cover Provide a mechanism to avoid using #ifdef everywhere
Many parts of the U-Boot code base are sprinkled with #ifdefs. This makes different boards compile different versions of the source code, meaning that we must build all boards to check for failures. It is easy to misspell an #ifdef and there is not as much checking of this by the compiler. Multiple dependent #ifdefs are harder to do than with if..then..else. Variable declarations must be #idefed as well as the code that uses them, often much later in the file/function. #ifdef indents don't match code indents and have their own separate indent feature. Overall, excessive use of #idef hurts readability and makes the code harder to modify and refactor. For people coming newly into the code base, #ifdefs can be a big barrier.
The use of #ifdef in U-Boot has possibly got a little out of hand. In an attempt to turn the tide, this series includes a patch which provides a way to make CONFIG macros available to C code without using the preprocessor. This makes it possible to use standard C conditional features such as if/then instead of #ifdef. A README update exhorts compliance.
As an example of how to use this, this series replaces all but two #ifdefs from the main code body of common/main.c, which is one of the largest users of #ifdef, even after a recent cleanup:
for f in $(find . -name *.c); do echo $(grep -c "ifdef" $f) $f; do ne |sort -nr |head
81 ./common/board_r.c
57 ./arch/powerpc/cpu/mpc83xx/cpu_init.c
55 ./common/board_f.c
49 ./common/main.c
48 ./arch/powerpc/lib/board.c
47 ./drivers/video/cfb_console.c
40 ./drivers/mtd/cfi_flash.c
38 ./net/tftp.c
37 ./drivers/usb/host/ohci-hcd.c
36 ./drivers/fpga/ivm_core.c
Code size for this series seems to be roughly neutral (below numbers are average change in byte size for each region:
blackfin: (for 24/35 boards) all -11.0 text -11.0
x86: (for 1/1 boards) bss +20.0 data +4.0 text -24.0
avr32: (for 10/10 boards) all -8.4 text -8.4
sandbox: (for 1/1 boards) all +16.0 bss +16.0
m68k: (for 41/50 boards) all -31.9 text -31.9
powerpc: (for 639/641 boards) all -20.5 bss +0.0 rodata -0.5 text -20.0
sparc: (for 5/5 boards) all -28.8 text -28.8
sh: (for 16/21 boards) all -78.2 bss +3.2 rodata -15.5 text -66.0
nios2: (for 3/3 boards) all +24.0 bss +1.3 data -1.3 text +24.0
arm: (for 307/327 boards) all -41.0 bss +3.5 data +0.1 rodata -3.6
spl/u-boot-spl:all -0.1 spl/u-boot-spl:bss -0.1 text -41.0Note that a config_drop.h file is added - this defines all the CONFIGs which are not used in any board config file. Without this, autoconf cannot define the macros for this CONFIGs.
Compile time for main.c does not seem to be any different in my tests. The time to perform the 'dep' step (which now creates autoconf.h) increases, from about 2.8s to about 4.6s. This additional time is used to grep, sed and sort the contents of all the header file in U-Boot. The time for an incremental build is not affected.
It would be much more efficient to maintain a list of all available CONFIG defines, but no such list exists at present.
Buildman output shows no additional failures from mainline:
01: Merge branch 'master' of git://www.denx.de/git/u-boot-mmc
blackfin: + bf561-acvilon cm-bf561 blackstamp br4 bct-brettl2 cm-bf527 dnp5370 bf506f-ezkit ip04 bf527-sdp bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf527-ezkit bf537-pnav cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-srv1 cm-bf548 bf537-minotaur bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit
m68k: + M54455EVB_a66 M5329AFEE M5249EVB idmr M5208EVBE M5475FFE M54451EVB astro_mcf5373l M54418TWR_serial_rmii M54455EVB_intel M5282EVB M54455EVB_i66 M5475GFE M5253DEMO M54455EVB_stm33 M5485BFE M5485DFE M5329BFEE M52277EVB M5475EFE M5475CFE M5485AFE M53017EVB M5475AFE M5485HFE M5235EVB M5253EVBE M54418TWR_nand_mii M54418TWR_nand_rmii_lowfreq TASREG cobra5272 M5475BFE M5475DFE M5275EVB M52277EVB_stmicro eb_cpu5282 eb_cpu5282_internal M54451EVB_stmicro M5271EVB M5485GFE M5485EFE M5485FFE M54418TWR M5235EVB_Flash32 M5373EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5485CFE M54455EVB M5272C3
powerpc: + MVBLM7 MVSMR lcd4_lwmon5
sh: + rsk7269 rsk7264 sh7757lcr sh7752evb rsk7203
microblaze: + microblaze-generic
openrisc: + openrisc-generic
arm: + palmtc zipitz2 VCMA9 lubbock zynq_dcc vpac270_nor_128 colibri_pxa270 kzm9g zynq xaeniax polaris pxa255_idp lp8x4x vpac270_ond_256 vpac270_nor_256 smdk2410 h2200 balloon3 palmld trizepsiv
nds32: + adp-ag101p adp-ag102 adp-ag10102: Implement autoconf header file
03: main: Use autoconf for boot retry feature
04: main: Remove CONFIG #ifdefs from the abortboot() code 05: main: Use autoconf to remove #ifdefs around process_boot_delay() 06: main: Use autoconf for boot_delay code
07: main: Use autoconf for parser selection
08: main: Use autoconf in command line reading
09: main: Use autoconf in main_loop()
Changes in v4:
- Rebase on current master
- Split out new patch to remove #ifdefs around process_boot_delay()
- Tidy up code style nits with new checkpatch
Changes in v3:
- Add comment as to why we use [A-Za-z0-9_][A-Za-z0-9_]*
- Fix missing && in if() statement
- Remove the extra config_of_libfdt() condition in main_loop()
- Remove unneeded retry_min variable
- Rename sed scripts to more useful names
- Simplify code for finding out bootdelay from config or environment
- Update config_xxx() to autoconf_xxx() in comments/README/sed
- Update config_xxx_enabled() to autoconf_has_xxx() in comments/README/sed
Changes in v2:
- Add a grep to the sed/sort pipe to speed up processing
- Fix up a few errors and comments in the original RFC
- Split out changes to main.c into separate patches
- Use autoconf_...() instead of config_...()
- Use autoconf_has_...() instead of config_..._enabled()
Simon Glass (8):
Implement autoconf header file
main: Use autoconf for boot retry feature
main: Remove CONFIG #ifdefs from the abortboot() code
main: Use autoconf to remove #ifdefs around process_boot_delay()
main: Use autoconf for boot_delay code
main: Use autoconf for parser selection
main: Use autoconf in command line reading
main: Use autoconf in main_loop()
Makefile | 43 ++- README | 87 +++++- common/main.c | 629 ++++++++++++++++++----------------------- include/command.h | 2 - include/common.h | 6 +- include/config_drop.h | 17 ++ include/fdt_support.h | 4 +- include/hush.h | 2 - include/menu.h | 2 - tools/scripts/define2value.sed | 37 +++ tools/scripts/define2zero.sed | 32 +++ 11 files changed, 492 insertions(+), 369 deletions(-) create mode 100644 include/config_drop.h create mode 100644 tools/scripts/define2value.sed create mode 100644 tools/scripts/define2zero.sed
Signature · 1 line
1.8.3
PATCH v4 1/8 Implement autoconf header file
Add support for generating an autoconf.h header file that can be used in the source instead of #ifdef.
For example, instead of:
#ifdef CONFIG_VERSION_VARIABLE
setenv("ver", version_string); /* set version variable */
#endif
you can do:
if (autoconf_version_variable())
setenv("ver", version_string); /* set version variable */
The compiler will ensure that the dead code is eliminated, so the result is the same.
Where the value of the CONFIG define is 0, you can use the autoconf_has...() form. For example CONFIG_BOOTDELAY can be -ve, 0 or +ve, but if it is defined at all, it affects behaviour:
#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
s = getenv ("bootdelay");#endif
So we use:
if (autoconf_has_bootdelay() && autoconf_bootdelay() >= 0)
s = getenv ("bootdelay");This later form should only be used for such 'difficult' defines where a zero value still means that the CONFIG should be considered to be defined.
---
Changes in v4: None
Changes in v3:
- Add comment as to why we use [A-Za-z0-9_][A-Za-z0-9_]*
- Rename sed scripts to more useful names
- Update config_xxx() to autoconf_xxx() in comments/README/sed
- Update config_xxx_enabled() to autoconf_has_xxx() in comments/README/sed
Changes in v2:
- Add a grep to the sed/sort pipe to speed up processing
- Fix up a few errors and comments in the original RFC
- Split out changes to main.c into separate patches
- Use autoconf_...() instead of config_...()
- Use autoconf_has_...() instead of config_..._enabled()
Makefile | 43 ++++++++++++++++++++- README | 87 ++++++++++++++++++++++++++++++++++++++++-- include/common.h | 3 ++ include/config_drop.h | 17 +++++++++ tools/scripts/define2value.sed | 37 ++++++++++++++++++ tools/scripts/define2zero.sed | 32 ++++++++++++++++ 6 files changed, 215 insertions(+), 4 deletions(-) create mode 100644 include/config_drop.h create mode 100644 tools/scripts/define2value.sed create mode 100644 tools/scripts/define2zero.sed
Makefile +42 -1
@@ -629,6 +629,7 @@ updater: # parallel sub-makes creating .depend files simultaneously. depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ $(obj)include/autoconf.mk \ + $(obj)include/generated/autoconf.h \ $(obj)include/generated/generic-asm-offsets.h \ $(obj)include/generated/asm-offsets.h for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
@@ -703,6 +704,45 @@ $(obj)include/autoconf.mk: $(obj)include/config.h sed -n -f tools/scripts/define2mk.sed > [email protected] && \ mv [email protected] $@ +# Create a C header file where every '#define CONFIG_XXX value' becomes +# '#define autoconf_xxx() value', or '#define autoconf_xxx() 0' where the +# CONFIG is not used by this board configuration. This allows C code to do +# things like 'if (autoconf_xxx())' and have the compiler remove the dead code, +# instead of using '#ifdef CONFIG_XXX...#endif'. Note that in most cases +# if the autoconf_...() returns 0 then the option is not enabled. In some rare +# cases such as CONFIG_BOOTDELAY, the config can be enabled but still have a +# a value of 0. So in addition we a #define autoconf_has_xxx(), setting the +# value to 0 if the option is disabled, 1 if enabled. This last feature will +# hopefully be deprecated soon. +# The file is regenerated when any U-Boot header file changes. +$(obj)include/generated/autoconf.h: $(obj)include/config.h + @$(XECHO) Generating $@ ; \ + set -e ; \ + : Extract the config macros to a C header file ; \ + $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2value.sed > [email protected]; \ + : Regenerate our list of all config macros if neeed ; \ + if [ ! -f [email protected] ] || \ + find $(src) -name '*.h' -type f -newer [email protected] | \ + egrep -qv 'include/(autoconf.h|generated|config.h)'; \ + then \ + : Extract all config macros from all C header files ; \ + : We can grep for CONFIG since the value will be dropped ; \ + ( \ + find ${src} -name "*.h" -type f | xargs \ + cat | grep CONFIG | \ + sed -n -f tools/scripts/define2zero.sed \ + ) | sort | uniq > [email protected]; \ + fi; \ + : Extract the enabled config macros to a C header file ; \ + $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2zero.sed | \ + sort > [email protected]; \ + set -e ; \ + : Find CONFIGs that are not enabled ; \ + comm -13 [email protected] [email protected] >>[email protected] && \ + mv [email protected] $@ + $(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ $(obj)lib/asm-offsets.s @$(XECHO) Generating $@
@@ -785,7 +825,8 @@ include/license.h: tools/bin2header COPYING unconfig: @rm -f $(obj)include/config.h $(obj)include/config.mk \ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ - $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep + $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \ + $(obj)include/generated/autoconf.h %_config:: unconfig @$(MKCONFIG) -A $(@:_config=)
README +84 -3
95 lines not on this page · raw message
include/common.h +3 -0
@@ -35,6 +35,9 @@ typedef volatile unsigned short vu_short;typedef volatile unsigned char vu_char ;#include <config.h> +#ifndef DO_DEPS_ONLY +#include <generated/autoconf.h> +#endif #include <asm-offsets.h> #include <linux/bitops.h> #include <linux/types.h>
include/config_drop.h new file +17 -0
@@ -0,0 +1,17 @@ +/* +* Copyright 2013 Google, Inc +* +* This file is licensed under the terms of the GNU General Public +* License Version 2. This file is licensed "as is" without any +* warranty of any kind, whether express or implied. +*/ + +#ifndef _CONFIG_DROP_H +#define _CONFIG_DROP_H + +/* Options which don't seem to be defined by any header in U-Boot */ +#define CONFIG_MENUPROMPT "Auto-boot prompt" +#define CONFIG_MENUKEY +#define CONFIG_UPDATE_TFTP + +#endif
tools/scripts/define2value.sed new file +37 -0
@@ -0,0 +1,37 @@ +# +# Sed script to parse CPP macros and generate a list of CONFIG macros +# +# This converts: +# #define CONFIG_XXX value +#into: +# #define autoconf_xxx() value +# #define autoconf_has_xxx() 1 + +# Macros with parameters are ignored. +# (Note we avoid + since it doesn't appear to work) +/^#define CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*(/ { + d +} + +# Only process values prefixed with #define CONFIG_ +/^#define CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*/ { + # Strip the #define prefix + s/#define[ \t]*CONFIG_/autoconf_/; + # Change to form CONFIG_*=VALUE + s/[\t ][\t ]*/=/; + # Handle lines with no value + s/^\([^=]*\)$/\1=/; + # Drop trailing spaces + s/ *$//; + # Change empty values to '1' + s/=$/=1/; + # Add #define at the start + s/^\([^=]*\)=/#define \L\1() / + # print the line + p + # Create autoconf_has_...(), value 1 + s/().*/() 1/ + s/\(autoconf_\)/\1has_/ + # print the line + p +}
tools/scripts/define2zero.sed new file +32 -0
@@ -0,0 +1,32 @@ +# +# Sed script to parse CPP macros and generate a list of autoconf macros +# +# This converts: +# #define CONFIG_XXX value +#into: +# #define autoconf_xxx() 0 +# #define autoconf_has_xxx() 0 + +# Macros with parameters are ignored. +# (Note we avoid + since it doesn't appear to work) +/^#define CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*(/ { + s/.*// +} + +# Only process values prefixed with #define CONFIG_ +/^#define CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*/ { + # Strip the #define prefix + s/#define *//; + # Remove the value + s/[ \t].*//; + # Convert to lower case, prepend #define + s/CONFIG_\(.*\)/#define autoconf_\L\1/ + # Append 0 + s/$/() 0/ + # print the line + p + # Create autoconf_has_...(), value 0 + s/\(autoconf_\)/\1has_/ + # print the line + p +}
Signature · 1 line
1.8.3
PATCH v4 2/8 main: Use autoconf for boot retry feature
In reply to Simon GlassChange this feature to use autoconf instead of #ifdef.
---
Changes in v4:
- Rebase on current master
- Tidy up code style nits with new checkpatch
Changes in v3:
- Fix missing && in if() statement
- Remove unneeded retry_min variable
Changes in v2: None
common/main.c | 73 ++++++++++++++++++++++++++--------------------------------- 1 file changed, 32 insertions(+), 41 deletions(-)
common/main.c +32 -41
@@ -65,17 +65,11 @@ static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);static const char erase_seq[] ="\b \b" ;/* erase sequence */ static const char tab_seq[] =" " ;/* used to expand TABs */ -#ifdef CONFIG_BOOT_RETRY_TIME static uint64_t endtime =0 ;/* must be set, default is instant timeout */ static int retry_time =-1 ;/* -1 so can call readline before main_loop */ -#endif #define endtick (seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk()) -#ifndef CONFIG_BOOT_RETRY_MIN -#define CONFIG_BOOT_RETRY_MIN CONFIG_BOOT_RETRY_TIME -#endif -#ifdef CONFIG_MODEM_SUPPORT int do_mdm_init =0 ;extern void mdm_init (void );/* defined in board.c */
@@ -174,11 +168,10 @@ static int abortboot_keyed(int bootdelay) delaykey[i].retry ?"delay" : "stop"); -# ifdef CONFIG_BOOT_RETRY_TIME -/* don't retry auto boot */ -if (! delaykey[i].retry) +/* don't retry auto boot? */ +if (autoconf_boot_retry_time () && + !delaykey[i].retry) retry_time =-1 ; -# endif abort =1 ; } }
@@ -368,9 +361,8 @@ static void process_boot_delay(void)#if defined(CONFIG_MENU_SHOW ) bootdelay =menu_show (bootdelay);#endif -# ifdef CONFIG_BOOT_RETRY_TIME -init_cmd_timeout (); -# endif /* CONFIG_BOOT_RETRY_TIME */ +if (autoconf_boot_retry_time ()) +init_cmd_timeout ();#ifdef CONFIG_POST if (gd->flags &GD_FLG_POSTFAIL ) {
@@ -499,14 +491,12 @@ void main_loop(void)for (;;);#else for (;;) { -#ifdef CONFIG_BOOT_RETRY_TIME -if (rc >=0 ) { +if (autoconf_boot_retry_time () && rc >=0 ) {/* Saw enough of a valid command to * restart the timeout. */ reset_cmd_timeout (); } -#endif len =readline (CONFIG_SYS_PROMPT ); flag =0 ;/* assume no special flags for now */
@@ -514,19 +504,16 @@ void main_loop(void)strcpy (lastcommand, console_buffer); else if (len == 0) flag |= CMD_FLAG_REPEAT; -#ifdef CONFIG_BOOT_RETRY_TIME - else if (len == -2) { + else if (autoconf_boot_retry_time() && len == -2) {/* -2 means timed out, retry autoboot */ -puts ("\nTimed out waiting for command\n" ); -# ifdef CONFIG_RESET_TO_RETRY +puts ("\nTimed out waiting for command\n" );/* Reinit board to run initialization code again */ -do_reset (NULL ,0 ,0 ,NULL ); -# else -return ;/* retry autoboot */ -# endif +if (autoconf_reset_to_retry ()) +do_reset (NULL ,0 ,0 ,NULL ); +else +return ;/* retry autoboot */ } -#endif if (len ==-1 )puts ("<INTERRUPT>\n" );
@@ -541,6 +528,10 @@ void main_loop(void)#endif /*CONFIG_SYS_HUSH_PARSER*/ } +/* +* Use ifdef here for the benefit of those archs not using +* -ffunction-sections, since these functions are exported. +*/ #ifdef CONFIG_BOOT_RETRY_TIME /*************************************************************************** * initialize command line timeout
@@ -552,10 +543,10 @@ void init_cmd_timeout(void)if (s !=NULL ) retry_time = (int )simple_strtol (s,NULL ,10 );else - retry_time =CONFIG_BOOT_RETRY_TIME ; + retry_time =autoconf_boot_retry_time (); -if (retry_time >=0 && retry_time <CONFIG_BOOT_RETRY_MIN ) - retry_time =CONFIG_BOOT_RETRY_MIN ; +if (retry_time >=0 && retry_time <autoconf_boot_retry_min ()) + retry_time =autoconf_boot_retry_min (); }/***************************************************************************
@@ -777,13 +768,13 @@ static int cread_line(const char *const prompt, char *buf, unsigned int *len,cread_add_str (buf, init_len,1 , &num, &eol_num, buf, *len);while (1 ) { -#ifdef CONFIG_BOOT_RETRY_TIME -while (!tstc ()) {/* while no incoming data */ -if (retry_time >=0 &&get_ticks () > endtime) -return (-2 );/* timed out */ -WATCHDOG_RESET (); +if (autoconf_boot_retry_time ()) { +while (!tstc ()) {/* while no incoming data */ +if (retry_time >=0 &&get_ticks () > endtime) +return -2 ;/* timed out */ +WATCHDOG_RESET (); + } } -#endif if (first && timeout) {uint64_t etime =endtick (timeout);
@@ -1055,14 +1046,14 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) col = plen;for (;;) { -#ifdef CONFIG_BOOT_RETRY_TIME -while (!tstc ()) {/* while no incoming data */ -if (retry_time >=0 &&get_ticks () > endtime) -return (-2 );/* timed out */ -WATCHDOG_RESET (); +if (autoconf_boot_retry_time ()) { +while (!tstc ()) {/* while no incoming data */ +if (retry_time >=0 &&get_ticks () > endtime) +return -2 ;/* timed out */ +WATCHDOG_RESET (); + } } -#endif -WATCHDOG_RESET ();/* Trigger watchdog, if needed */ +WATCHDOG_RESET ();/* Trigger watchdog, if needed */ #ifdef CONFIG_SHOW_ACTIVITY while (!tstc ()) {
Signature · 1 line
1.8.3
PATCH v4 3/8 main: Remove CONFIG #ifdefs from the abortboot() code
In reply to Simon GlassMove this code over to using autoconf. We can add the autoconf values to the delaykey[] array, and move the code that checks for autoconf values into the loop.
Also change to using ARRAY_SIZE on delaykey[].
---
Changes in v4:
- Rebase on current master
Changes in v3: None
Changes in v2: None
common/main.c | 90 ++++++++++++++++++++++------------------------------------- 1 file changed, 34 insertions(+), 56 deletions(-)
common/main.c +34 -56
@@ -86,15 +86,20 @@ static int abortboot_keyed(int bootdelay)int abort =0 ;uint64_t etime =endtick (bootdelay);struct { -char * str; +const char *str;u_int len;int retry; +const char *conf;/* Configuration value */ } delaykey [] = { - { str:getenv ("bootdelaykey" ), retry:1 }, - { str:getenv ("bootdelaykey2" ), retry:1 }, - { str:getenv ("bootstopkey" ), retry:0 }, - { str:getenv ("bootstopkey2" ), retry:0 }, + { str:getenv ("bootdelaykey" ), retry:1 , + conf:autoconf_autoboot_delay_str () }, + { str:getenv ("bootdelaykey2" ), retry:1 , + conf:autoconf_autoboot_delay_str2 () }, + { str:getenv ("bootstopkey" ), retry:0 , + conf:autoconf_autoboot_stop_str () }, + { str:getenv ("bootstopkey2" ), retry:0 , + conf:autoconf_autoboot_stop_str2 () }, };char presskey [MAX_DELAY_STOP_STR ];
@@ -102,33 +107,15 @@ static int abortboot_keyed(int bootdelay)u_int presskey_max =0 ;u_int i; -#ifndef CONFIG_ZERO_BOOTDELAY_CHECK -if (bootdelay ==0 ) +if (!autoconf_zero_bootdelay_check () && bootdelay ==0 )return 0 ; -#endif -# ifdef CONFIG_AUTOBOOT_PROMPT -printf (CONFIG_AUTOBOOT_PROMPT ); -# endif - -# ifdef CONFIG_AUTOBOOT_DELAY_STR -if (delaykey[0 ].str ==NULL ) - delaykey[0 ].str =CONFIG_AUTOBOOT_DELAY_STR ; -# endif -# ifdef CONFIG_AUTOBOOT_DELAY_STR2 -if (delaykey[1 ].str ==NULL ) - delaykey[1 ].str =CONFIG_AUTOBOOT_DELAY_STR2 ; -# endif -# ifdef CONFIG_AUTOBOOT_STOP_STR -if (delaykey[2 ].str ==NULL ) - delaykey[2 ].str =CONFIG_AUTOBOOT_STOP_STR ; -# endif -# ifdef CONFIG_AUTOBOOT_STOP_STR2 -if (delaykey[3 ].str ==NULL ) - delaykey[3 ].str =CONFIG_AUTOBOOT_STOP_STR2 ; -# endif - -for (i =0 ; i <sizeof (delaykey) /sizeof (delaykey[0 ]); i ++) { +if (autoconf_has_autoboot_prompt ()) +printf (autoconf_autoboot_prompt ()); + +for (i =0 ; i <ARRAY_SIZE (delaykey); i++) { +if (delaykey[i].conf && !delaykey[i].str) + delaykey[i].str = delaykey[i].conf; delaykey[i].len = delaykey[i].str ==NULL ?0 :strlen (delaykey[i].str); delaykey[i].len = delaykey[i].len > MAX_DELAY_STOP_STR ?
@@ -158,7 +145,7 @@ static int abortboot_keyed(int bootdelay) } } - for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { + for (i = 0; i < ARRAY_SIZE(delaykey); i++) { if (delaykey[i].len > 0 && presskey_len >= delaykey[i].len && memcmp (presskey + presskey_len - delaykey[i].len,
@@ -180,45 +167,39 @@ static int abortboot_keyed(int bootdelay)if (!abort)debug_bootkeys ("key timeout\n" ); -#ifdef CONFIG_SILENT_CONSOLE -if (abort) +if (autoconf_silent_console () && abort) gd->flags &= ~GD_FLG_SILENT ; -#endif return abort; }# else /* !defined(CONFIG_AUTOBOOT_KEYED) */ -#ifdef CONFIG_MENUKEY -static int menukey =0 ; -#endif +static int menukey;static int abortboot_normal (int bootdelay) {int abort =0 ;unsigned long ts; -#ifdef CONFIG_MENUPROMPT -printf (CONFIG_MENUPROMPT ); -#else -if (bootdelay >=0 ) +if (autoconf_menuprompt ()) +printf (autoconf_menuprompt ()); +else if (bootdelay >=0 )printf ("Hit any key to stop autoboot: %2d " , bootdelay); -#endif -#if definedCONFIG_ZERO_BOOTDELAY_CHECK /* -* Check if key already pressed -* Don't check if bootdelay < 0 +* If we need to do a bootdelay check even if bootdelay is 0, do +* it here, since the loop below will be skipped in this case. +* We don't do this check if bootdelay < 0. */ -if (bootdelay >=0 ) { -if (tstc ()) {/* we got a key press */ +if (autoconf_zero_bootdelay_check () && bootdelay >=0 ) { +/* Check if key already pressed */ +if (tstc ()) {/* we got a key press */ (void )getc ();/* consume input */ puts ("\b\b\b 0" ); abort =1 ;/* don't auto boot */ } } -#endif while ((bootdelay >0 ) && (!abort)) { --bootdelay;
@@ -228,11 +209,10 @@ static int abortboot_normal(int bootdelay)if (tstc ()) {/* we got a key press */ abort =1 ;/* don't auto boot */ bootdelay =0 ;/* no more delay */ -# ifdef CONFIG_MENUKEY - menukey =getc (); -# else - (void )getc ();/* consume input */ -# endif +if (autoconf_menukey ()) + menukey =getc (); +else + (void )getc ();/* consume input */ break ; }udelay (10000 );
@@ -243,10 +223,8 @@ static int abortboot_normal(int bootdelay)putc ('\n' ); -#ifdef CONFIG_SILENT_CONSOLE -if (abort) +if (autoconf_silent_console () && abort) gd->flags &= ~GD_FLG_SILENT ; -#endif return abort; }
Signature · 1 line
1.8.3
PATCH v4 4/8 main: Use autoconf to remove #ifdefs around process_boot_delay()
In reply to Simon GlassUse autoconf to make process_boot_delay() be compiled always, and adjust the caller and related functions as needed.
---
Changes in v4:
- Split out new patch to remove #ifdefs around process_boot_delay()
Changes in v3: None
Changes in v2: None
common/main.c | 71 ++++++++++++++++++++++++++--------------------------------- 1 file changed, 31 insertions(+), 40 deletions(-)
common/main.c +31 -40
@@ -79,8 +79,6 @@ extern void mdm_init(void); /* defined in board.c */* Watch for 'delay' seconds for autoboot stop or autoboot delay string. * returns: 0 - no key string, allow autoboot 1 - got key string, abort */ -#if defined(CONFIG_BOOTDELAY) -# if defined(CONFIG_AUTOBOOT_KEYED)static int abortboot_keyed (int bootdelay) {int abort =0 ;
@@ -173,8 +171,6 @@ static int abortboot_keyed(int bootdelay)return abort; } -# else /* !defined(CONFIG_AUTOBOOT_KEYED) */ -static int menukey;static int abortboot_normal (int bootdelay)
@@ -228,17 +224,14 @@ static int abortboot_normal(int bootdelay)return abort; } -# endif /* CONFIG_AUTOBOOT_KEYED */ static int abortboot (int bootdelay) { -#ifdef CONFIG_AUTOBOOT_KEYED -return abortboot_keyed (bootdelay); -#else -return abortboot_normal (bootdelay); -#endif +if (autoconf_autoboot_keyed ()) +return abortboot_keyed (bootdelay); +else +return abortboot_normal (bootdelay); } -#endif /* CONFIG_BOOTDELAY */ /* * Runs the given boot command securely. Specifically:
@@ -254,7 +247,6 @@ static int abortboot(int bootdelay)* printing the error message to console. */ -#if defined(CONFIG_BOOTDELAY ) && defined(CONFIG_OF_CONTROL )static void secure_boot_cmd (char *cmd) {cmd_tbl_t *cmdtp;
@@ -295,22 +287,21 @@ static void process_fdt_options(const void *blob)/* Add an env variable to point to a kernel payload, if available */ addr =fdtdec_get_config_int (gd->fdt_blob,"kernel-offset" ,0 ); -if (addr) -setenv_addr ("kernaddr" , (void *)(CONFIG_SYS_TEXT_BASE + addr)); +if (addr) { +setenv_addr ("kernaddr" , + (void *)(autoconf_sys_text_base () + addr)); + }/* Add an env variable to point to a root disk, if available */ addr =fdtdec_get_config_int (gd->fdt_blob,"rootdisk-offset" ,0 ); -if (addr) -setenv_addr ("rootaddr" , (void *)(CONFIG_SYS_TEXT_BASE + addr)); +if (addr) { +setenv_addr ("rootaddr" , + (void *)(autoconf_sys_text_base () + addr)); + } } -#endif /* CONFIG_OF_CONTROL */ -#ifdef CONFIG_BOOTDELAY static void process_boot_delay (void ) { -#ifdef CONFIG_OF_CONTROL -char *env; -#endif char *s;int bootdelay;#ifdef CONFIG_BOOTCOUNT_LIMIT
@@ -327,7 +318,7 @@ static void process_boot_delay(void)#endif /* CONFIG_BOOTCOUNT_LIMIT */ s =getenv ("bootdelay" ); - bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :CONFIG_BOOTDELAY ; + bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :autoconf_bootdelay ();#ifdef CONFIG_OF_CONTROL bootdelay = fdtdec_get_config_int(gd->fdt_blob, "bootdelay",
@@ -357,23 +348,24 @@ static void process_boot_delay(void) else#endif /* CONFIG_BOOTCOUNT_LIMIT */ s =getenv ("bootcmd" ); -#ifdef CONFIG_OF_CONTROL -/* Allow the fdt to override the boot command */ - env =fdtdec_get_config_string (gd->fdt_blob,"bootcmd" ); -if (env) - s = env; +if (autoconf_of_control ()) { +char *env; -process_fdt_options (gd->fdt_blob); +/* Allow the fdt to override the boot command */ + env =fdtdec_get_config_string (gd->fdt_blob,"bootcmd" ); +if (env) + s = env; -/* -* If the bootsecure option was chosen, use secure_boot_cmd(). -* Always use 'env' in this case, since bootsecure requres that the -* bootcmd was specified in the FDT too. -*/ -if (fdtdec_get_config_int (gd->fdt_blob,"bootsecure" ,0 )) -secure_boot_cmd (env); +process_fdt_options (gd->fdt_blob); -#endif /* CONFIG_OF_CONTROL */ +/* +* If the bootsecure option was chosen, use secure_boot_cmd(). +* Always use 'env' in this case, since bootsecure requres that +* the bootcmd was specified in the FDT too. +*/ +if (fdtdec_get_config_int (gd->fdt_blob,"bootsecure" ,0 )) +secure_boot_cmd (env); + }debug ("### main_loop: bootcmd=\"%s\"\n" , s ? s :"<UNDEFINED>" );
@@ -397,7 +389,6 @@ static void process_boot_delay(void) }#endif /* CONFIG_MENUKEY */ } -#endif /* CONFIG_BOOTDELAY */ void main_loop (void ) {
@@ -457,9 +448,9 @@ void main_loop(void)update_tftp (0UL );#endif /* CONFIG_UPDATE_TFTP */ -#ifdef CONFIG_BOOTDELAY -process_boot_delay (); -#endif +if (autoconf_has_bootdelay () &&autoconf_bootdelay () >=0 ) +process_boot_delay (); +/* * Main Loop for Monitor Command Processing */
Signature · 1 line
1.8.3
PATCH v4 4/8 main: Use autoconf to remove #ifdefs around process_boot_delay()
Quoted 129 lines · Simon Glass
Use autoconf to make
process_boot_delay()be compiled always, and adjust the caller and related functions as needed.Signed-off-by Simon Glass <[email protected]>---
Changes in v4:
- Split out new patch to remove #ifdefs aroundprocess_boot_delay()Changes in v3: None
Changes in v2: Nonecommon/main.c | 71 ++++++++++++++++++++++++++--------------------------------- 1 file changed, 31 insertions(+), 40 deletions(-)common/main.c +19
-33@@ -79,8 +79,6 @@ extern void mdm_init(void); /* defined in board.c */* Watch for 'delay' seconds for autoboot stop or autoboot delay string. * returns: 0 - no key string, allow autoboot 1 - got key string, abort */ -#if defined(CONFIG_BOOTDELAY) -# if defined(CONFIG_AUTOBOOT_KEYED)static int abortboot_keyed (int bootdelay) {int abort =0 ;@@ -173,8 +171,6 @@ static int abortboot_keyed(int bootdelay)return abort; } -# else /* !defined(CONFIG_AUTOBOOT_KEYED) */ -static int menukey;static int abortboot_normal (int bootdelay)@@ -228,17 +224,14 @@ static int abortboot_normal(int bootdelay)return abort; } -# endif /* CONFIG_AUTOBOOT_KEYED */ static int abortboot (int bootdelay) { -#ifdef CONFIG_AUTOBOOT_KEYED -return abortboot_keyed (bootdelay); -#else -return abortboot_normal (bootdelay); -#endif +if (autoconf_autoboot_keyed ()) +return abortboot_keyed (bootdelay); +else +return abortboot_normal (bootdelay); } -#endif /* CONFIG_BOOTDELAY */ /* * Runs the given boot command securely. Specifically: @@ -254,7 +247,6 @@ static int abortboot(int bootdelay)* printing the error message to console. */ -#if defined(CONFIG_BOOTDELAY ) && defined(CONFIG_OF_CONTROL )static void secure_boot_cmd (char *cmd) {cmd_tbl_t *cmdtp;@@ -295,22 +287,21 @@ static void process_fdt_options(const void *blob)/* Add an env variable to point to a kernel payload, if available */ addr =fdtdec_get_config_int (gd->fdt_blob,"kernel-offset" ,0 ); -if (addr) -setenv_addr ("kernaddr" , (void *)(CONFIG_SYS_TEXT_BASE + addr)); +if (addr) { +setenv_addr ("kernaddr" , + (void *)(autoconf_sys_text_base () + addr)); + }/* Add an env variable to point to a root disk, if available */ addr =fdtdec_get_config_int (gd->fdt_blob,"rootdisk-offset" ,0 ); -if (addr) -setenv_addr ("rootaddr" , (void *)(CONFIG_SYS_TEXT_BASE + addr)); +if (addr) { +setenv_addr ("rootaddr" , + (void *)(autoconf_sys_text_base () + addr)); + } } -#endif /* CONFIG_OF_CONTROL */ -#ifdef CONFIG_BOOTDELAY static void process_boot_delay (void ) { -#ifdef CONFIG_OF_CONTROL -char *env; -#endif char *s;int bootdelay;#ifdef CONFIG_BOOTCOUNT_LIMIT @@ -327,7 +318,7 @@ static void process_boot_delay(void)#endif /* CONFIG_BOOTCOUNT_LIMIT */ s =getenv ("bootdelay" ); - bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :CONFIG_BOOTDELAY ; + bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :autoconf_bootdelay ();#ifdef CONFIG_OF_CONTROL bootdelay = fdtdec_get_config_int(gd->fdt_blob, "bootdelay",@@ -357,23 +348,24 @@ static void process_boot_delay(void) else#endif /* CONFIG_BOOTCOUNT_LIMIT */ s =getenv ("bootcmd" ); -#ifdef CONFIG_OF_CONTROL -/* Allow the fdt to override the boot command */ - env =fdtdec_get_config_string (gd->fdt_blob,"bootcmd" ); -if (env) - s = env; +if (autoconf_of_control ()) { +char *env; -process_fdt_options (gd->fdt_blob); +/* Allow the fdt to override the boot command */ + env =fdtdec_get_config_string (gd->fdt_blob,"bootcmd" ); +if (env) + s = env; -/* -* If the bootsecure option was chosen, use secure_boot_cmd(). -* Always use 'env' in this case, since bootsecure requres that the -* bootcmd was specified in the FDT too. -*/
common/main.c static void process_boot_delay(void) · line 365
Quoted 10 lines
common/main.c +6
-3-if (fdtdec_get_config_int (gd->fdt_blob,"bootsecure" ,0 )) -secure_boot_cmd (env); +process_fdt_options (gd->fdt_blob); -#endif /* CONFIG_OF_CONTROL */ +/* +* If the bootsecure option was chosen, use secure_boot_cmd(). +* Always use 'env' in this case, since bootsecure requres that +* the bootcmd was specified in the FDT too. +*/
This indentation doesn't look good to me.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131028/84c268eb/attachment.pgp>
PATCH v4 5/8 main: Use autoconf for boot_delay code
In reply to Simon GlassConvert this function and its children to use autoconf instead of #ifdef.
---
Changes in v4:
- Rebase on current master
Changes in v3:
- Simplify code for finding out bootdelay from config or environment
Changes in v2: None
common/main.c | 74 +++++++++++++++++++++++++--------------------------------- include/menu.h | 2 -- 2 files changed, 32 insertions(+), 44 deletions(-)
common/main.c +32 -42
@@ -302,52 +302,42 @@ static void process_fdt_options(const void *blob)static void process_boot_delay (void ) { -char *s; -int bootdelay; -#ifdef CONFIG_BOOTCOUNT_LIMIT unsigned long bootcount =0 ;unsigned long bootlimit =0 ; -#endif /* CONFIG_BOOTCOUNT_LIMIT */ - -#ifdef CONFIG_BOOTCOUNT_LIMIT - bootcount =bootcount_load (); - bootcount++; -bootcount_store (bootcount); -setenv_ulong ("bootcount" , bootcount); - bootlimit =getenv_ulong ("bootlimit" ,10 ,0 ); -#endif /* CONFIG_BOOTCOUNT_LIMIT */ - - s =getenv ("bootdelay" ); - bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :autoconf_bootdelay (); - -#ifdef CONFIG_OF_CONTROL - bootdelay =fdtdec_get_config_int (gd->fdt_blob,"bootdelay" , - bootdelay); -#endif +const char *s; +int bootdelay; + +if (autoconf_bootcount_limit ()) { + bootcount =bootcount_load (); + bootcount++; +bootcount_store (bootcount); +setenv_ulong ("bootcount" , bootcount); + bootlimit =getenv_ulong ("bootlimit" ,10 ,0 ); + } + bootdelay =getenv_ulong ("bootdelay" ,10 ,autoconf_bootdelay ()); + +if (autoconf_of_control ()) { + bootdelay =fdtdec_get_config_int (gd->fdt_blob,"bootdelay" , + bootdelay); + }debug ("### main_loop entered: bootdelay=%d\n\n" , bootdelay); -#if defined(CONFIG_MENU_SHOW ) - bootdelay =menu_show (bootdelay); -#endif +if (autoconf_menu_show ()) + bootdelay =menu_show (bootdelay);if (autoconf_boot_retry_time ())init_cmd_timeout (); -#ifdef CONFIG_POST -if (gd->flags &GD_FLG_POSTFAIL ) { +if (autoconf_post () && (gd->flags &GD_FLG_POSTFAIL )) { s =getenv ("failbootcmd" ); - } - else -#endif /* CONFIG_POST */ -#ifdef CONFIG_BOOTCOUNT_LIMIT -if (bootlimit && (bootcount > bootlimit)) { + }else if (autoconf_bootcount_limit () && bootlimit && + (bootcount > bootlimit)) {printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n" , (unsigned )bootlimit); s =getenv ("altbootcmd" ); - } - else -#endif /* CONFIG_BOOTCOUNT_LIMIT */ + }else { s =getenv ("bootcmd" ); + }if (autoconf_of_control ()) {char *env;
@@ -370,24 +360,24 @@ static void process_boot_delay(void)debug ("### main_loop: bootcmd=\"%s\"\n" , s ? s :"<UNDEFINED>" );if (bootdelay !=-1 && s && !abortboot (bootdelay)) { -#ifdef CONFIG_AUTOBOOT_KEYED -int prev =disable_ctrlc (1 );/* disable Control C checking */ -#endif +int prev; + +/* disable Control C checking */ +if (autoconf_autoboot_keyed ()) + prev =disable_ctrlc (1 );run_command_list (s,-1 ,0 ); -#ifdef CONFIG_AUTOBOOT_KEYED -disable_ctrlc (prev);/* restore Control C checking */ -#endif +/* restore Control C checking */ +if (autoconf_autoboot_keyed ()) +disable_ctrlc (prev); } -#ifdef CONFIG_MENUKEY -if (menukey ==CONFIG_MENUKEY ) { +if (autoconf_menukey () && menukey ==autoconf_menukey ()) { s =getenv ("menucmd" );if (s)run_command_list (s,-1 ,0 ); } -#endif /* CONFIG_MENUKEY */ }void main_loop (void )
include/menu.h +0 -2
@@ -31,7 +31,5 @@ int menu_destroy(struct menu *m);void menu_display_statusline (struct menu *m);int menu_default_choice (struct menu *m,void **choice); -#if defined(CONFIG_MENU_SHOW )int menu_show (int bootdelay); -#endif #endif /* __MENU_H__ */
Signature · 1 line
1.8.3
PATCH v4 6/8 main: Use autoconf for parser selection
In reply to Simon GlassAllow parser selection to make use of autoconf instead of #ifdefs.
---
Changes in v4:
- Rebase on current master
Changes in v3: None
Changes in v2: None
common/main.c | 87 +++++++++++++++++++++++++++------------------------------- include/hush.h | 2 -- 2 files changed, 41 insertions(+), 48 deletions(-)
common/main.c +41 -46
@@ -382,12 +382,10 @@ static void process_boot_delay(void)void main_loop (void ) { -#ifndef CONFIG_SYS_HUSH_PARSER static char lastcommand[CONFIG_SYS_CBSIZE ] = {0 , };int len;int rc =1 ;int flag; -#endif #ifdef CONFIG_PREBOOT char *p;#endif
@@ -444,12 +442,11 @@ void main_loop(void)/* * Main Loop for Monitor Command Processing */ -#ifdef CONFIG_SYS_HUSH_PARSER -parse_file_outer (); -/* This point is never reached */ -for (;;); -#else -for (;;) { +if (autoconf_sys_hush_parser ()) { +parse_file_outer (); +/* This point is never reached */ +for (;;); + }else {if (autoconf_boot_retry_time () && rc >=0 ) {/* Saw enough of a valid command to * restart the timeout.
@@ -484,7 +481,6 @@ void main_loop(void) lastcommand[0 ] =0 ; } } -#endif /*CONFIG_SYS_HUSH_PARSER*/ }/*
@@ -1174,7 +1170,6 @@ int parse_line (char *line, char *argv[])/****************************************************************************/ -#ifndef CONFIG_SYS_HUSH_PARSER static void process_macros (const char *input,char *output) {char c, prev;
@@ -1382,7 +1377,6 @@ static int builtin_run_command(const char *cmd, int flag)return rc ? rc : repeatable; } -#endif /* * Run a command using the selected parser.
@@ -1393,22 +1387,21 @@ static int builtin_run_command(const char *cmd, int flag)*/ int run_command (const char *cmd,int flag) { -#ifndef CONFIG_SYS_HUSH_PARSER -/* -* builtin_run_command can return 0 or 1 for success, so clean up -* its result. -*/ -if (builtin_run_command (cmd, flag) ==-1 ) -return 1 ; - -return 0 ; -#else -return parse_string_outer (cmd, +if (autoconf_sys_hush_parser ()) { +return parse_string_outer (cmd,FLAG_PARSE_SEMICOLON |FLAG_EXIT_FROM_LOOP ); -#endif + }else { +/* +* builtin_run_command can return 0 or 1 for success, so +* clean up its result. +*/ +if (builtin_run_command (cmd, flag) ==-1 ) +return 1 ; + +return 0 ; + } } -#ifndef CONFIG_SYS_HUSH_PARSER /** * Execute a list of command separated by ; or \n using the built-in parser. *
@@ -1449,7 +1442,6 @@ static int builtin_run_command_list(char *cmd, int flag)return rcode; } -#endif int run_command_list (const char *cmd,int len,int flag) {
@@ -1459,13 +1451,16 @@ int run_command_list(const char *cmd, int len, int flag)if (len ==-1 ) { len =strlen (cmd); -#ifdef CONFIG_SYS_HUSH_PARSER -/* hush will never change our string */ - need_buff =0 ; -#else -/* the built-in parser will change our string if it sees \n */ - need_buff =strchr (cmd,'\n' ) !=NULL ; -#endif +if (autoconf_sys_hush_parser ()) { +/* hush will never change our string */ + need_buff =0 ; + }else { +/* +* the built-in parser will change our string if it +* sees \n +*/ + need_buff =strchr (cmd,'\n' ) !=NULL ; + } }if (need_buff) { buff =malloc (len +1 );
@@ -1474,20 +1469,20 @@ int run_command_list(const char *cmd, int len, int flag)memcpy (buff, cmd, len); buff[len] ='\0' ; } -#ifdef CONFIG_SYS_HUSH_PARSER - rcode =parse_string_outer (buff,FLAG_PARSE_SEMICOLON ); -#else -/* -* This function will overwrite any \n it sees with a \0, which -* is why it can't work with a const char *. Here we are making -* using of internal knowledge of this function, to avoid always -* doing a malloc() which is actually required only in a case that -* is pretty rare. -*/ - rcode =builtin_run_command_list (buff, flag); -if (need_buff) -free (buff); -#endif +if (autoconf_sys_hush_parser ()) { + rcode =parse_string_outer (buff,FLAG_PARSE_SEMICOLON ); + }else { +/* +* This function will overwrite any \n it sees with a \0, which +* is why it can't work with a const char *. Here we are making +* using of internal knowledge of this function, to avoid always +* doing a malloc() which is actually required only in a case +* that is pretty rare. +*/ + rcode =builtin_run_command_list (buff, flag); +if (need_buff) +free (buff); + }return rcode; }
include/hush.h +0 -2
@@ -36,7 +36,5 @@ int set_local_var(const char *s, int flg_export);void unset_local_var (const char *name);char *get_local_var (const char *s); -#if defined(CONFIG_HUSH_INIT_VAR )extern int hush_init_var (void );#endif -#endif
Signature · 1 line
1.8.3
PATCH v4 7/8 main: Use autoconf in command line reading
In reply to Simon GlassRemove #ifdefs in favour of autoconf for this code. This involves removing a few unnecessary #ifdefs in headers also.
We have two versions of the code - one that handles command line editing and one that is just a simple implementation. Create a new function called readline_into_buffer() which calls either cread_line() or the new simple_readline(), created to hold the 'simple' code.
The cread_print_hist_list() function is not actually used anywhere, so punt it.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
common/main.c | 164 ++++++++++++++++++++++++------------------------------ include/command.h | 2 - include/common.h | 2 - 3 files changed, 73 insertions(+), 95 deletions(-)
common/main.c +73 -91
@@ -513,8 +513,6 @@ void reset_cmd_timeout(void) }#endif -#ifdef CONFIG_CMDLINE_EDITING -/* * cmdline-editing related codes from vivi. * Author: Janghoon Lyu <[email protected]>
@@ -617,27 +615,6 @@ static char* hist_next(void)return (ret); } -#ifndef CONFIG_CMDLINE_EDITING -static void cread_print_hist_list (void ) -{ -int i; -unsigned long n; - - n = hist_num - hist_max; - - i = hist_add_idx +1 ; -while (1 ) { -if (i > hist_max) - i =0 ; -if (i == hist_add_idx) -break ; -printf ("%s\n" , hist_list[i]); - n++; - i++; - } -} -#endif /* CONFIG_CMDLINE_EDITING */ -#define BEGINNING_OF_LINE () { \ while (num) { \ getcmd_putch(CTL_BACKSPACE); \
@@ -899,27 +876,27 @@ static int cread_line(const char *const prompt, char *buf, unsigned int *len,REFRESH_TO_EOL ();continue ; } -#ifdef CONFIG_AUTO_COMPLETE -case '\t' : { -int num2, col; +case '\t' : +if (autoconf_auto_complete ()) { +int num2, col; -/* do not autocomplete when in the middle */ -if (num < eol_num) { -getcmd_cbeep (); -break ; - } +/* do not autocomplete when in the middle */ +if (num < eol_num) { +getcmd_cbeep (); +break ; + } - buf[num] ='\0' ; - col =strlen (prompt) + eol_num; - num2 = num; -if (cmd_auto_complete (prompt, buf, &num2, &col)) { - col = num2 - num; - num += col; - eol_num += col; + buf[num] ='\0' ; + col =strlen (prompt) + eol_num; + num2 = num; +if (cmd_auto_complete (prompt, buf, &num2, + &col)) { + col = num2 - num; + num += col; + eol_num += col; + } +break ; } -break ; - } -#endif default :cread_add_char (ichar, insert, &num, &eol_num, buf, *len);break ;
@@ -935,8 +912,6 @@ static int cread_line(const char *const prompt, char *buf, unsigned int *len,return 0 ; } -#endif /* CONFIG_CMDLINE_EDITING */ -/****************************************************************************/ /*
@@ -958,46 +933,14 @@ int readline (const char *const prompt)return readline_into_buffer (prompt, console_buffer,0 ); } - -int readline_into_buffer (const char *const prompt,char *buffer,int timeout) +static int simple_readline (const char *const prompt,int plen,char *p, +int timeout) { -char *p = buffer; -#ifdef CONFIG_CMDLINE_EDITING -unsigned int len =CONFIG_SYS_CBSIZE ; -int rc; -static int initted =0 ; - -/* -* History uses a global array which is not -* writable until after relocation to RAM. -* Revert to non-history version if still -* running from flash. -*/ -if (gd->flags &GD_FLG_RELOC ) { -if (!initted) { -hist_init (); - initted =1 ; - } - -if (prompt) -puts (prompt); - - rc =cread_line (prompt, p, &len, timeout); -return rc <0 ? rc : len; - - }else { -#endif /* CONFIG_CMDLINE_EDITING */ char * p_buf = p;int n =0 ;/* buffer index */ -int plen =0 ;/* prompt length */ int col;/* output column cnt */ char c; -/* print prompt */ -if (prompt) { - plen =strlen (prompt); -puts (prompt); - } col = plen;for (;;) {
@@ -1010,12 +953,12 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) }WATCHDOG_RESET ();/* Trigger watchdog, if needed */ -#ifdef CONFIG_SHOW_ACTIVITY -while (!tstc ()) { -show_activity (0 ); -WATCHDOG_RESET (); +if (autoconf_show_activity ()) { +while (!tstc ()) { +show_activity (0 ); +WATCHDOG_RESET (); + } } -#endif c =getc ();/*
@@ -1062,14 +1005,20 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout)*/ if (n <CONFIG_SYS_CBSIZE -2 ) {if (c =='\t' ) {/* expand TABs */ -#ifdef CONFIG_AUTO_COMPLETE -/* if auto completion triggered just continue */ - *p ='\0' ; -if (cmd_auto_complete (prompt, console_buffer, &n, &col)) { - p = p_buf + n;/* reset */ -continue ; +if (autoconf_auto_complete ()) { +/* +* if auto completion triggered +* just continue +*/ + *p ='\0' ; +if (cmd_auto_complete (prompt, + console_buffer, + &n, &col)) { +/* reset */ + p = p_buf + n; +continue ; + } } -#endif puts (tab_seq+(col&07 )); col +=8 - (col&07 ); }else {
@@ -1091,9 +1040,42 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) } } } -#ifdef CONFIG_CMDLINE_EDITING +} + +int readline_into_buffer (const char *const prompt,char *buffer,int timeout) +{ +unsigned int len =CONFIG_SYS_CBSIZE ; +int rc; +static int initted; + +/* +* History uses a global array which is not +* writable until after relocation to RAM. +* Revert to non-history version if still +* running from flash. +*/ +if (autoconf_cmdline_editing () && (gd->flags &GD_FLG_RELOC )) { +if (!initted) { +hist_init (); + initted =1 ; + } + +if (prompt) +puts (prompt); + + rc =cread_line (prompt, buffer, &len, timeout); +return rc <0 ? rc : len; + + }else { +int plen =0 ;/* prompt length */ + +/* print prompt */ +if (prompt) { + plen =strlen (prompt); +puts (prompt); + } +return simple_readline (prompt, plen, buffer, timeout); } -#endif }/****************************************************************************/
include/command.h +0 -2
@@ -75,10 +75,8 @@ cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);extern int cmd_usage (const cmd_tbl_t *cmdtp); -#ifdef CONFIG_AUTO_COMPLETE extern int var_complete (int argc,char *const argv[],char last_char,int maxv,char *cmdv[]);extern int cmd_auto_complete (const char *const prompt,char *buf,int *np,int *colp); -#endif /* * Monitor Command
include/common.h +0 -2
@@ -906,9 +906,7 @@ int pcmcia_init (void);#include <bootstage.h> -#ifdef CONFIG_SHOW_ACTIVITY void show_activity (int arg); -#endif /* Multicore arch functions */ #ifdef CONFIG_MP
Signature · 1 line
1.8.3
PATCH v4 8/8 main: Use autoconf in main_loop()
In reply to Simon GlassConvert main_loop() over to use autoconf, and add a required prototype to common.h.
The do_mdm_init variable is now always defined, but this seems like an acceptable compromise.
In fdt_support.h the #ifdef used is CONFIG_OF_LIBFDT. However, even if this is not defined we want to make the functions available for our conditional-compilation scheme. The only place where we really don't have access to these support functions is when USE_HOSTCC is defined. So change the #ifdef to that.
---
Changes in v4:
- Rebase on current master
Changes in v3:
- Remove the extra config_of_libfdt() condition in main_loop()
Changes in v2: None
common/main.c | 72 +++++++++++++++++++++++---------------------------- include/common.h | 1 + include/fdt_support.h | 4 +-- 3 files changed, 35 insertions(+), 42 deletions(-)
common/main.c +32 -40
@@ -70,10 +70,7 @@ static int retry_time = -1; /* -1 so can call readline before main_loop */#define endtick (seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk()) -#ifdef CONFIG_MODEM_SUPPORT int do_mdm_init =0 ; -extern void mdm_init (void );/* defined in board.c */ -#endif /*************************************************************************** * Watch for 'delay' seconds for autoboot stop or autoboot delay string.
@@ -386,51 +383,47 @@ void main_loop(void)int len;int rc =1 ;int flag; -#ifdef CONFIG_PREBOOT -char *p; -#endif bootstage_mark_name (BOOTSTAGE_ID_MAIN_LOOP ,"main_loop" ); -#ifdef CONFIG_MODEM_SUPPORT -debug ("DEBUG: main_loop: do_mdm_init=%d\n" , do_mdm_init); -if (do_mdm_init) { -char *str =strdup (getenv ("mdm_cmd" )); -setenv ("preboot" , str);/* set or delete definition */ -if (str !=NULL ) -free (str); -mdm_init ();/* wait for modem connection */ +if (autoconf_modem_support ()) { +debug ("DEBUG: main_loop: do_mdm_init=%d\n" , do_mdm_init); +if (do_mdm_init) { +char *str =strdup (getenv ("mdm_cmd" )); + +setenv ("preboot" , str);/* set or delete definition */ +if (str !=NULL ) +free (str); +mdm_init ();/* wait for modem connection */ + } } -#endif /* CONFIG_MODEM_SUPPORT */ -#ifdef CONFIG_VERSION_VARIABLE - { +if (autoconf_version_variable ())setenv ("ver" , version_string);/* set version variable */ - } -#endif /* CONFIG_VERSION_VARIABLE */ -#ifdef CONFIG_SYS_HUSH_PARSER -u_boot_hush_start (); -#endif +if (autoconf_sys_hush_parser ()) +u_boot_hush_start (); -#if defined(CONFIG_HUSH_INIT_VAR ) -hush_init_var (); -#endif +if (autoconf_hush_init_var ()) +hush_init_var (); + +if (autoconf_preboot ()) { +char *p =getenv ("preboot" ); + +if (p) { +int prev; -#ifdef CONFIG_PREBOOT - p =getenv ("preboot" ); -if (p !=NULL ) { -# ifdef CONFIG_AUTOBOOT_KEYED -int prev =disable_ctrlc (1 );/* disable Control C checking */ -# endif +/* disable Control C checking */ +if (autoconf_autoboot_keyed ()) + prev =disable_ctrlc (1 ); -run_command_list (p,-1 ,0 ); +run_command_list (p,-1 ,0 ); -# ifdef CONFIG_AUTOBOOT_KEYED -disable_ctrlc (prev);/* restore Control C checking */ -# endif +/* restore Control C checking */ +if (autoconf_autoboot_keyed ()) +disable_ctrlc (prev); + } } -#endif /* CONFIG_PREBOOT */ #if defined(CONFIG_UPDATE_TFTP )update_tftp (0UL );
@@ -472,14 +465,13 @@ void main_loop(void) }if (len ==-1 ) -puts ("<INTERRUPT>\n" ); +puts ("<INTERRUPT>\n" );else rc =run_command (lastcommand, flag); -if (rc <=0 ) { -/* invalid command or not repeatable, forget it */ +/* If an invalid command or not repeatable, forget it */ +if (rc <=0 ) lastcommand[0 ] =0 ; - } } }
include/common.h +1 -0
@@ -328,6 +328,7 @@ extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */int set_cpu_clk_info (void );int print_cpuinfo (void );int update_flash_size (int flash_size); +extern int mdm_init (void );/* defined in board.c */ /** * Show the DRAM size in a board-specific way
include/fdt_support.h +2 -2
@@ -24,7 +24,7 @@#ifndef __FDT_SUPPORT_H#define __FDT_SUPPORT_H -#ifdef CONFIG_OF_LIBFDT +#ifndef USE_HOSTCC #include <libfdt.h>
@@ -130,5 +130,5 @@ static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias)return fdt_set_status_by_alias (fdt, alias,FDT_STATUS_DISABLED ,0 ); } -#endif /* ifdef CONFIG_OF_LIBFDT */ +#endif /* ifdef USE_HOSTCC */ #endif /* ifndef __FDT_SUPPORT_H */
Signature · 1 line
1.8.3
v4 cover Provide a mechanism to avoid using #ifdef everywhere
In reply to Simon GlassHi Simon,
Quoted 4 lines · Simon Glass
Note that a
config_drop.hfile is added - this defines all the CONFIGs which are not used in any board config file. Without this, autoconf cannot define the macros for this CONFIGs.
Quoted 8 lines
Compile time for
main.cdoes not seem to be any different in my tests. The time to perform the 'dep' step (which now createsautoconf.h) increases, from about 2.8s to about 4.6s. This additional time is used to grep, sed and sort the contents of all the header file in U-Boot. The time for an incremental build is not affected.It would be much more efficient to maintain a list of all available CONFIG defines, but no such list exists at present.
Stop me if I am wrong, but do you not have this list already, since at one point you grep, sed and sort the whole list of config options, then at another point generate the list of unused ones?
Granted, that's the list of config options defined, not necessarily the list of options used, but a second variation of the grep/sed/sort might give you a hint on that.
Plus, I would love having scripts in tools/ that look for either defined or used config options.
Amicalement,
Signature · 1 line
Albert.
v4 cover Provide a mechanism to avoid using #ifdef everywhere
Hi Albert,
Quoted 17 lines · Albert ARIBAUD
Hi Simon,
Quoted 2 lines · Simon Glass
Note that a
config_drop.hfile is added - this defines all the CONFIGs which are not used in any board config file. Without this, autoconfcannot
Quoted 3 lines
define the macros for this CONFIGs.
Compile time for
main.cdoes not seem to be any different in my tests.The
Quoted 5 lines
time to perform the 'dep' step (which now creates
autoconf.h) increases, from about 2.8s to about 4.6s. This additional time is used to grep, sed and sort the contents of all the header file in U-Boot. The time for an incremental build is not affected.
Quoted 8 lines
Quoted 1 line
It would be much more efficient to maintain a list of all available
CONFIG
Quoted 1 line
defines, but no such list exists at present.
Stop me if I am wrong, but do you not have this list already, since at one point you grep, sed and sort the whole list of config options, then at another point generate the list of unused ones?
Well yes I create the list. But I don't 'have' it in the sense that it is a pre-existing file in the tree. My point was that if the file existed I would not need to create it in the build system. I asked about this at one point, and the comment was made that putting it in the source tree 'staticly' is risky, since someone might add a new option and it would not work.
Perhaps when Kconfig is in there things will be different.
Quoted 8 lines
Granted, that's the list of config options defined, not necessarily the list of options used, but a second variation of the grep/sed/sort might give you a hint on that.
Plus, I would love having scripts in
tools/that look for either defined or used config options.
With this series you kind-of get this feature - you can look at the files it creates along the way.
Regards,
Simon
v4 cover Provide a mechanism to avoid using #ifdef everywhere
Hi Simon,
Quoted 31 lines · Simon Glass
Hi Albert,
Quoted 17 lines · Albert ARIBAUD
Hi Simon,
Quoted 2 lines · Simon Glass
Note that a
config_drop.hfile is added - this defines all the CONFIGs which are not used in any board config file. Without this, autoconfcannot
Quoted 3 lines
define the macros for this CONFIGs.
Compile time for
main.cdoes not seem to be any different in my tests.The
Quoted 5 lines
time to perform the 'dep' step (which now creates
autoconf.h) increases, from about 2.8s to about 4.6s. This additional time is used to grep, sed and sort the contents of all the header file in U-Boot. The time for an incremental build is not affected.Quoted 8 lines
Quoted 1 line
It would be much more efficient to maintain a list of all available
CONFIG
Quoted 1 line
defines, but no such list exists at present.
Stop me if I am wrong, but do you not have this list already, since at one point you grep, sed and sort the whole list of config options, then at another point generate the list of unused ones?
Quoted 8 lines
Well yes I create the list. But I don't 'have' it in the sense that it is a pre-existing file in the tree. My point was that if the file existed I would not need to create it in the build system. I asked about this at one point, and the comment was made that putting it in the source tree 'staticly' is risky, since someone might add a new option and it would not work.
Perhaps when
Kconfigis in there things will be different.
Understod.
Quoted 10 lines
Quoted 7 lines
Granted, that's the list of config options defined, not necessarily the list of options used, but a second variation of the grep/sed/sort might give you a hint on that.
Plus, I would love having scripts in
tools/that look for either defined or used config options.With this series you kind-of get this feature - you can look at the files it creates along the way.
What I meant is, this patch creates those lists with scripts. I'd like these scripts to be available to the developer in tools/ so that anyone can regenerate the lists (and do this only) at any time.
Quoted 2 lines
Regards,
Simon
Amicalement,
Signature · 1 line
Albert.
v4 cover Provide a mechanism to avoid using #ifdef everywhere
Hi Albert,
Quoted 63 lines · Albert ARIBAUD
Hi Simon,
Quoted 11 lines · Simon Glass
Hi Albert,
Quoted 6 lines · Albert ARIBAUD
Hi Simon,
Quoted 1 line · Simon Glass
Note that a
config_drop.hfile is added - this defines all theCONFIGs
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
which are not used in any board config file. Without this, autoconf
cannot
Quoted 3 lines
define the macros for this CONFIGs.
Compile time for
main.cdoes not seem to be any different in mytests.
Quoted 2 lines
Quoted 2 lines
The
Quoted 1 line
time to perform the 'dep' step (which now creates
autoconf.h)increases,
Quoted 1 line
Quoted 1 line
Quoted 1 line
from about 2.8s to about 4.6s. This additional time is used to grep,
sed
Quoted 1 line
Quoted 1 line
Quoted 1 line
and sort the contents of all the header file in U-Boot. The time for
an
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
incremental build is not affected.
It would be much more efficient to maintain a list of all available
CONFIG
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
defines, but no such list exists at present.
Stop me if I am wrong, but do you not have this list already, since at one point you grep, sed and sort the whole list of config options, then at another point generate the list of unused ones?
Well yes I create the list. But I don't 'have' it in the sense that it
is a
Quoted 2 lines
pre-existing file in the tree. My point was that if the file existed I would not need to create it in the build system. I asked about this at
one
Quoted 2 lines
point, and the comment was made that putting it in the source tree 'staticly' is risky, since someone might add a new option and it would
not
Quoted 3 lines
work.
Perhaps when
Kconfigis in there things will be different.Understod.
Quoted 8 lines
Quoted 7 lines
Granted, that's the list of config options defined, not necessarily the list of options used, but a second variation of the grep/sed/sort might give you a hint on that.
Plus, I would love having scripts in
tools/that look for either defined or used config options.
Quoted 7 lines
Quoted 2 lines
With this series you kind-of get this feature - you can look at the files it creates along the way.
What I meant is, this patch creates those lists with scripts. I'd like these scripts to be available to the developer in
tools/so that anyone can regenerate the lists (and do this only) at any time.
Yes, I figured that's what you were angling for. I will take a look.
Regards,
Simon