Problem scanning channels with s2-liplianin drivers on Terratec Cynergy C PCI HD
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Sorry if this is cross posting. I already sent this message to linux-dvb list, but got a bounce from there saying that I should come here instead. So anyway here it goes:
I've been struggling for a while to get the channel scanning to work with my Terratec Cynergy C PCI HD DVB card. I'm using drivers from http://mercurial.intuxication.org/hg/s2-liplianin on Gentoo x86_64 system. Any help is greatly appreciated.
The problem might have something to do with dmesg entry: mantis_ack_wait (0): Slave RACK Fail !
By googling I found some patch for other card with same error message but the patch was quite old and didn't apply to the recent driver source.
I've tried with Gentoo genkernel (2.6.29-gentoo-r5) and with my own configuration (optimized for athlon64) I've tried dvbscan that comes with gentoo pakage linuxtv-dvb-apps and with http://mercurial.intuxication.org/hg/scan-s2
The s2-liplianin driver for this card has worked with my previous Ubuntu installation few months ago.
I tried to gather as much information about the problem as I could:
http://www.vanguard.fi/terratec/dvbscan_output.txt
http://www.vanguard.fi/terratec/dmesg.txt
http://www.vanguard.fi/terratec/lspci.txt
http://www.vanguard.fi/terratec/emergeinfo.txt
http://www.vanguard.fi/terratec/kernel-config
Thank you in advance!
- Beepo