Error trying to generate Raspberry Pi initramfs
I'm trying to generate an initramfs for a raspberry pi 3 for a sumo build. We are based off of the Qt boot2qt system.
I have followed the instructions in the meta-raspberrypi.pdf documentation, section 3.14 Image with Initramfs.
I edited the meta-raspberrypi/recipes-kernel/linux/linux-raspberry.inc file and added the variables into my local.conf file. I created a rpi-minimal-initramfs.bb recipe and it is created when I build the system. But the command line that is put into the boot partition is:
dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fbcon=map:10 fbcon=font:VGA8x8
No initramfs.
In the linux-raspberry.inc file, after the insertion point for the new kernel variables, there is a test for KERNEL_INITRAMFS. I tried setting this in my local.conf file, but when I do I get an error for a missing file:
| /home/..../tmp/deploy/images/raspberrypi3/uImage1-raspberrypi3.bin: No such file or directory
So, apparently that can't be set directly.
There seems to be something missing in the instructions in the meta-raspberrypi.pdf documentation. Anyone that has any experience with setting this up and can help me figure out what I'm missing, I would greatly appreciate the help.
Regards,
Greg Wilson-Lindberg
Three things:
[1] The initramfs is NOT the initrd (te second one is the temp
stage in booting the linux to mmcblk...);
[2] There are some config parameters you need to set up in your kernel .config file:
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/custom/config-initramfs
[3] The command line is formed in u-boot or in grub2, or in your Linux boot loader (you need to add some lines in ash u-boot config script, as the following example):
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/custom/u-boot.ash
Good Luck,
Zoran
_______
Quoted 37 lines · Greg Wilson-Lindberg
I'm trying to generate an initramfs for a raspberry pi 3 for a sumo build. We are based off of the Qt boot2qt system.
I have followed the instructions in the meta-raspberrypi.pdf documentation, section 3.14 Image with Initramfs.
I edited the meta-raspberrypi/recipes-kernel/linux/linux-raspberry.inc file and added the variables into my local.conf file. I created a rpi-minimal-initramfs.bb recipe and it is created when I build the system. But the command line that is put into the boot partition is:
dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fbcon=map:10 fbcon=font:VGA8x8
No initramfs.
In the linux-raspberry.inc file, after the insertion point for the new kernel variables, there is a test for
KERNEL_INITRAMFS. I tried setting this in my local.conf file, but when I do I get an error for a missing file:|
/home/..../tmp/deploy/images/raspberrypi3/uImage1-raspberrypi3.bin: No such file or directorySo, apparently that can't be set directly.
There seems to be something missing in the instructions in the meta-raspberrypi.pdf documentation. Anyone that has any experience with setting this up and can help me figure out what I'm missing, I would greatly appreciate the help.
Regards,
Greg Wilson-Lindberg--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto