configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
PATCH v2 1/1 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
There is no real benefit in adding the board name into U-boot's prompt, so remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> " prompt is used across FSL boards.
---
Changes since v1:
- Remove CONFIG_SYS_PROMPT completely, instead of replacing with '=>'
include/configs/mx25pdk.h | 1 - include/configs/mx28evk.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mx35pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6sabre_common.h | 1 - 10 files changed, 10 deletions(-)
include/configs/mx25pdk.h +0 -1
@@ -65,7 +65,6 @@#define CONFIG_SYS_MMC_ENV_DEV 0/* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "MX25PDK U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print buffer sz */
include/configs/mx28evk.h +0 -1
@@ -14,7 +14,6 @@/* System configurations */ #define CONFIG_MX28 /* i.MX28 SoC */ #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK -#define CONFIG_SYS_PROMPT "MX28EVK U-Boot > "/* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH
include/configs/mx31pdk.h +0 -1
@@ -120,7 +120,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "MX31PDK U-Boot > "#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
include/configs/mx35pdk.h +0 -1
@@ -136,7 +136,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "MX35 U-Boot > "#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
include/configs/mx51evk.h +0 -1
@@ -219,7 +219,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "MX51EVK U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */
include/configs/mx53evk.h +0 -1
@@ -136,7 +136,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "MX53EVK U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
include/configs/mx53loco.h +0 -1
@@ -178,7 +178,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "MX53LOCO U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */
include/configs/mx53smd.h +0 -1
@@ -121,7 +121,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "MX53SMD U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
include/configs/mx6qarm2.h +0 -1
@@ -114,7 +114,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "MX6QARM2 U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256
include/configs/mx6sabre_common.h +0 -1
@@ -171,7 +171,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "U-Boot > "#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256
Signature · 1 line
1.8.1.2
PATCH v2 1/1 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
Hi Stefano,
Quoted 8 lines · Fabio Estevam
There is no real benefit in adding the board name into U-boot's prompt, so remove the custom
CONFIG_SYS_PROMPTdefinitions so that the standard "=> " prompt is used across FSL boards.Signed-off-by Fabio Estevam <[email protected]>---
Changes since v1:
- RemoveCONFIG_SYS_PROMPTcompletely, instead of replacing with '=>'
Forgot to mention that this patch depends on Rob's:
http://patchwork.ozlabs.org/patch/279334/
,otherwise we get build errors.
Regards,
Fabio Estevam
PATCH v2 1/1 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
Hi Fabio,
Quoted 8 lines · Fabio Estevam
Hi Stefano,
Quoted 4 lines · Fabio Estevam
There is no real benefit in adding the board name into U-boot's prompt, so remove the custom
CONFIG_SYS_PROMPTdefinitions so that the standard "=> " prompt is used across FSL boards.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Fabio Estevam <[email protected]>---
Changes since v1:
- RemoveCONFIG_SYS_PROMPTcompletely, instead of replacing with '=>'Forgot to mention that this patch depends on Rob's:
http://patchwork.ozlabs.org/patch/279334/
Right, I am tracking Rob's patch before including yours.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/1 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
In reply to Fabio EstevamQuoted 6 lines · Fabio Estevam
There is no real benefit in adding the board name into U-boot's prompt, so remove the custom
CONFIG_SYS_PROMPTdefinitions so that the standard "=> " prompt is used across FSL boards.Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================