pinctrl: imx50: add pinctrl support code for the IMX50 SoC
Subsystems (2)
PATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
From: Greg Ungerer <[email protected]>
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
--- drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx50.c | 426 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 435 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-imx50.c
drivers/pinctrl/Kconfig +8 -0
@@ -88,6 +88,14 @@ config PINCTRL_IMX35 help Say Y here to enable the imx35 pinctrl driver +config PINCTRL_IMX50 + bool "IMX50 pinctrl driver" + depends on OF + depends on SOC_IMX50 + select PINCTRL_IMX + help + Say Y here to enable the imx50 pinctrl driver + config PINCTRL_IMX51 bool "IMX51 pinctrl driver" depends on OF
drivers/pinctrl/Makefile +1 -0
@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o obj-$(CONFIG_PINCTRL_IMX35) += pinctrl-imx35.o +obj-$(CONFIG_PINCTRL_IMX50) += pinctrl-imx50.o obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o
drivers/pinctrl/pinctrl-imx50.c new file +426 -0
426 lines not on this page · raw message
Signature · 1 line
1.8.1.4
PATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
Quoted 5 lines · On Tue, Oct 29, 2013 at 6:13 AM, <[email protected]> wrote:
From: Greg Ungerer <[email protected]>
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
Signed-off-by Greg Ungerer <[email protected]>
Can I get some maintainer to review this for the next cycle?
BTW: how many i.MX:es does remain? Have we not covered them all soon?
Yours,
Linus Walleij
Sascha Hauer
maintainerPATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
Quoted 4 lines · Linus Walleij
Quoted 2 lines · On Tue, Oct 29, 2013 at 6:13 AM, <[email protected]> wrote:
From: Greg Ungerer <[email protected]>
Quoted 8 lines
Quoted 3 lines
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
Signed-off-by Greg Ungerer <[email protected]>Can I get some maintainer to review this for the next cycle?
BTW: how many i.MX:es does remain? Have we not covered them all soon?
We have three different iomux ips. I once ordered them by an arbitrary version number. We have
iomux-v1: i.MX1, i.MX21, i.MX27
iomux-v2: i.MX31
iomux-v3: i.MX25, i.MX35, i.MX50 i.MX51, i.MX53, i.MX6
I think it's quite unlikely that someone writes a iomux-v2 driver.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
In reply to Linus WalleijQuoted 9 lines · Linus Walleij
Quoted 5 lines · On Tue, Oct 29, 2013 at 6:13 AM, <[email protected]> wrote:
From: Greg Ungerer <[email protected]>
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
Signed-off-by Greg Ungerer <[email protected]>Can I get some maintainer to review this for the next cycle?
PATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
Quoted 5 lines · Shawn Guo
Quoted 4 lines · Linus Walleij
Quoted 2 lines · On Tue, Oct 29, 2013 at 6:13 AM, <[email protected]> wrote:
From: Greg Ungerer <[email protected]>
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
Signed-off-by Greg Ungerer <[email protected]>Can I get some maintainer to review this for the next cycle?
Acked-by Shawn Guo <[email protected]>
OK I actually tried to apply it now since it is a new driver, but it needs rebasing.
Greg could you rebase this on top of the "devel" branch in my pinctrl tree so I can apply the patch?
Yours,
Linus Walleij
PATCH 1/1 pinctrl: imx50: add pinctrl support code for the IMX50 SoC
Hi Linus,
Quoted 12 lines · Linus Walleij
Quoted 11 lines · Shawn Guo
Quoted 9 lines · Linus Walleij
Quoted 5 lines · On Tue, Oct 29, 2013 at 6:13 AM, <[email protected]> wrote:
From: Greg Ungerer <[email protected]>
Add code to support the specific pin arrangements of the Freescale IMX50 SoC.
Signed-off-by Greg Ungerer <[email protected]>Can I get some maintainer to review this for the next cycle?
Quoted 7 lines
Quoted 1 line
Acked-by Shawn Guo <[email protected]>OK I actually tried to apply it now since it is a new driver, but it needs rebasing.
Greg could you rebase this on top of the "devel" branch in my pinctrl tree so I can apply the patch?
Yep, sure thing. New patch coming right up.
Regards
Greg