ARM: at91: sama5d3: add sama5d36ek support
Subsystems (5)
v2 cover ARM: at91: sama5d3: add sama5d36ek support
This patch series add support for sama5d36 in sama5d3x family. It also adds the dts & dtsi file for sama5d36ek board.
v1 --> v2:
base on the at91-3.13-cleanup tree.
add a new sama5d36.dtsi to include the splitted peripherals.
Josh Wu (2):
ARM: at91: sama5d3: add support for sama5d36 chip
ARM: at91: sama5d3/dt: add sama5d36ek dts files
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 +++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/include/mach/cpu.h | 3 +- arch/arm/mach-at91/sama5d3.c | 7 ++--- arch/arm/mach-at91/setup.c | 4 +++ 8 files changed, 84 insertions(+), 7 deletions(-) create mode 100644 arch/arm/boot/dts/sama5d36.dtsi create mode 100644 arch/arm/boot/dts/sama5d36ek.dts
Signature · 1 line
1.7.10
PATCH v2 1/2 ARM: at91: sama5d3: add support for sama5d36 chip
The SAMA5D36 chip is the superset product of SAMA5D3x family.
For detail information please refer to:
http://www.atmel.com/Microsite/sama5d3/default.aspx
---
v1 --> v2:
none.
arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/include/mach/cpu.h | 3 ++- arch/arm/mach-at91/sama5d3.c | 7 +++---- arch/arm/mach-at91/setup.c | 4 ++++ 4 files changed, 10 insertions(+), 6 deletions(-)
arch/arm/mach-at91/Kconfig +1 -1
@@ -67,7 +67,7 @@ config SOC_SAMA5D3 select HAVE_AT91_DBGU1 help Select this if you are using one of Atmel's SAMA5D3 family SoC. - This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35. + This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. endif if SOC_SAM_V4_V5
arch/arm/mach-at91/include/mach/cpu.h +2 -1
@@ -53,6 +53,7 @@#define ARCH_EXID_SAMA5D33 0x00414300#define ARCH_EXID_SAMA5D34 0x00414301#define ARCH_EXID_SAMA5D35 0x00584300 +#define ARCH_EXID_SAMA5D36 0x00004301#define ARCH_FAMILY_AT91X92 0x09200000#define ARCH_FAMILY_AT91SAM9 0x01900000
@@ -105,7 +106,7 @@ enum at91_soc_subtype {/* SAMA5D3 */ AT91_SOC_SAMA5D31 ,AT91_SOC_SAMA5D33 ,AT91_SOC_SAMA5D34 , -AT91_SOC_SAMA5D35 , +AT91_SOC_SAMA5D35 ,AT91_SOC_SAMA5D36 ,/* No subtype for this SoC */ AT91_SOC_SUBTYPE_NONE,
arch/arm/mach-at91/sama5d3.c +3 -4
@@ -177,25 +177,24 @@ static struct clk udphs_clk = { .pid = SAMA5D3_ID_UDPHS, .type = CLK_TYPE_PERIPHERAL, }; -/* gmac only for sama5d33, sama5d34, sama5d35 */ +/* gmac only for sama5d33, sama5d34, sama5d35, sama5d36 */ static struct clk macb0_clk = { .name ="macb0_clk" , .pid =SAMA5D3_ID_GMAC , .type =CLK_TYPE_PERIPHERAL , }; -/* emac only for sama5d31, sama5d35 */ +/* emac only for sama5d31, sama5d35, sama5d36 */ static struct clk macb1_clk = { .name ="macb1_clk" , .pid =SAMA5D3_ID_EMAC , .type =CLK_TYPE_PERIPHERAL , }; -/* lcd only for sama5d31, sama5d33, sama5d34 */ +/* lcd only for sama5d31, sama5d33, sama5d34, sama5d36 */ static struct clk lcdc_clk = { .name ="lcdc_clk" , .pid =SAMA5D3_ID_LCDC , .type =CLK_TYPE_PERIPHERAL , }; -/* isi only for sama5d33, sama5d35 */ static struct clk isi_clk = { .name ="isi_clk" , .pid =SAMA5D3_ID_ISI ,
arch/arm/mach-at91/setup.c +4 -0
@@ -232,6 +232,9 @@ static void __init soc_detect(u32 dbgu_base)case ARCH_EXID_SAMA5D35 : at91_soc_initdata.subtype =AT91_SOC_SAMA5D35 ;break ; +case ARCH_EXID_SAMA5D36 : + at91_soc_initdata.subtype =AT91_SOC_SAMA5D36 ; +break ; } } }
@@ -274,6 +277,7 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAMA5D33] = "sama5d33", [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", + [AT91_SOC_SAMA5D36] = "sama5d36", [AT91_SOC_SUBTYPE_NONE] = "None", [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", };
Signature · 1 line
1.7.10
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
In reply to Josh WuAdd .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in sama5d3.dtsi.
---
v1 --> v2:
add a new sama5d36.dtsi file to include the peripheral dtsi file.
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sama5d36.dtsi create mode 100644 arch/arm/boot/dts/sama5d36ek.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
arch/arm/boot/dts/sama5d3.dtsi +1 -1
@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>
arch/arm/boot/dts/sama5d36.dtsi new file +19 -0
@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};
arch/arm/boot/dts/sama5d36ek.dts new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
1.7.10
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
Quoted 21 lines · Josh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in
sama5d3.dtsi.Signed-off-by Josh Wu <[email protected]>---
v1 --> v2:
add a newsama5d36.dtsifile to include the peripheral dtsi file.arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sama5d36.dtsi create mode 100644 arch/arm/boot/dts/sama5d36ek.dtsarch/arm/boot/dts/Makefile +0
-0
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb · line 43
Quoted 4 lines
arch/arm/boot/dts/Makefile +1
-0@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
Just curious...but just wondering why there are a separate CONFIG_ARCH_AT91 for each board?
Why can't there be just a single CONFIG_ARCH_AT91 for all the boards?
Dinh
Quoted 99 lines
arch/arm/boot/dts/Makefile +0
-0dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \arch/arm/boot/dts/sama5d3.dtsi +1
-1@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>arch/arm/boot/dts/sama5d36.dtsi new file +19
-0@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};arch/arm/boot/dts/sama5d36ek.dts new file +53
-0@@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi at f0004000 { + status = "okay"; + }; + + ssc0: ssc at f0008000 { + status = "okay"; + }; + + can0: can at f000c000 { + status = "okay"; + }; + + i2c0: i2c at f0014000 { + status = "okay"; + }; + + i2c1: i2c at f0018000 { + status = "okay"; + }; + + macb0: ethernet at f0028000 { + status = "okay"; + }; + + macb1: ethernet at f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +};
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
Hi, Dinh
Quoted 17 lines · Dinh Nguyen
Quoted 16 lines · Josh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in
sama5d3.dtsi.Signed-off-by Josh Wu <[email protected]>---
v1 --> v2:
add a newsama5d36.dtsifile to include the peripheral dtsi file.arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-)create mode 100644
arch/arm/boot/dts/sama5d36.dtsicreate mode 100644arch/arm/boot/dts/sama5d36ek.dts
Quoted 12 lines
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb · line 43
Quoted 9 lines
arch/arm/boot/dts/Makefile +1
-0@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtbJust curious...but just wondering why there are a separate
CONFIG_ARCH_AT91for each board?
Why can't there be just a singleCONFIG_ARCH_AT91for all the boards?
right. that seems consistent with other boards. So in v3 I will add one more patch to do this. Thanks.
Best Regards,
Josh Wu
Quoted 101 lines
Dinh
Quoted 99 lines
arch/arm/boot/dts/Makefile +0
-0dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \arch/arm/boot/dts/sama5d3.dtsi +1
-1@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>arch/arm/boot/dts/sama5d36.dtsi new file +19
-0@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};arch/arm/boot/dts/sama5d36ek.dts new file +53
-0@@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi at f0004000 { + status = "okay"; + }; + + ssc0: ssc at f0008000 { + status = "okay"; + }; + + can0: can at f000c000 { + status = "okay"; + }; + + i2c0: i2c at f0014000 { + status = "okay"; + }; + + i2c1: i2c at f0018000 { + status = "okay"; + }; + + macb0: ethernet at f0028000 { + status = "okay"; + }; + + macb1: ethernet at f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +};
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
On 06/11/2013 07:06, Josh Wu :
Quoted 33 lines
Hi, Dinh
Quoted 17 lines · Dinh Nguyen
Quoted 16 lines · Josh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in
sama5d3.dtsi.Signed-off-by Josh Wu <[email protected]>---
v1 --> v2:
add a newsama5d36.dtsifile to include the peripheral dtsi file.arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-)create mode 100644
arch/arm/boot/dts/sama5d36.dtsicreate mode 100644arch/arm/boot/dts/sama5d36ek.dtsQuoted 12 lines
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb · line 43
Quoted 9 lines
arch/arm/boot/dts/Makefile +1
-0@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtbJust curious...but just wondering why there are a separate
CONFIG_ARCH_AT91for each board?
Why can't there be just a singleCONFIG_ARCH_AT91for all the boards?
Quoted 2 lines
right. that seems consistent with other boards. So in v3 I will add one more patch to do this. Thanks.
No. Please do not change this.
It was modified in commit ec6754a7b9e90a1eba7f3b2812003bb51d3dcf30
So if we have to come back to the former layout, we have to discuss it further.
Moreover this layout is easily readable, clear and easily expandable. So unless there is a consensus on moving to the other form, I would keep it like this.
Best regards,
Quoted 102 lines
Quoted 100 lines
Dinh
Quoted 99 lines
arch/arm/boot/dts/Makefile +0
-0dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \arch/arm/boot/dts/sama5d3.dtsi +1
-1@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>arch/arm/boot/dts/sama5d36.dtsi new file +19
-0@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};arch/arm/boot/dts/sama5d36ek.dts new file +53
-0@@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi at f0004000 { + status = "okay"; + }; + + ssc0: ssc at f0008000 { + status = "okay"; + }; + + can0: can at f000c000 { + status = "okay"; + }; + + i2c0: i2c at f0014000 { + status = "okay"; + }; + + i2c1: i2c at f0018000 { + status = "okay"; + }; + + macb0: ethernet at f0028000 { + status = "okay"; + }; + + macb1: ethernet at f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +};
Signature · 1 line
Nicolas Ferre
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
Quoted 44 lines · Nicolas Ferre
On 06/11/2013 07:06, Josh Wu :
Quoted 34 lines
Hi, Dinh
Quoted 18 lines · Dinh Nguyen
Quoted 17 lines · Josh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in
sama5d3.dtsi.Signed-off-by Josh Wu <[email protected]>---
v1 --> v2:
add a newsama5d36.dtsifile to include the peripheral dtsi file.arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-)create mode 100644
arch/arm/boot/dts/sama5d36.dtsicreate mode 100644arch/arm/boot/dts/sama5d36ek.dtsQuoted 12 lines
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb · line 43
Quoted 9 lines
arch/arm/boot/dts/Makefile +1
-0@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtbJust curious...but just wondering why there are a separate
CONFIG_ARCH_AT91for each board?
Why can't there be just a singleCONFIG_ARCH_AT91for all the boards?Quoted 2 lines
right. that seems consistent with other boards. So in v3 I will add one more patch to do this. Thanks.
No. Please do not change this.
It was modified in commitec6754a7b9e90a1eba7f3b2812003bb51d3dcf30
So if we have to come back to the former layout, we have to discuss it further.
Quoted 3 lines
Moreover this layout is easily readable, clear and easily expandable. So unless there is a consensus on moving to the other form, I would keep it like this.
Ok. I will keep it. In v3, I will only change copyright line.
Best Regards,
Josh Wu
Quoted 115 lines
Best regards,
Quoted 109 lines
Quoted 107 lines
Dinh
Quoted 106 lines
arch/arm/boot/dts/Makefile +0
-0dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \arch/arm/boot/dts/sama5d3.dtsi +0
-1@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34,SAMA5D35 SoC
+ * applies to SAMA5D31, SAMA5D33, SAMA5D34,
SAMA5D35, SAMA5D36 SoC
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches
<[email protected]>arch/arm/boot/dts/sama5d36.dtsi new file +19
-0@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};arch/arm/boot/dts/sama5d36ek.dts new file +16
-0@@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb","atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
arch/arm/boot/dts/sama5d36ek.dts new file +37
-0+ + ahb { + apb { + spi0: spi at f0004000 { + status = "okay"; + }; + + ssc0: ssc at f0008000 { + status = "okay"; + }; + + can0: can at f000c000 { + status = "okay"; + }; + + i2c0: i2c at f0014000 { + status = "okay"; + }; + + i2c1: i2c at f0018000 { + status = "okay"; + }; + + macb0: ethernet at f0028000 { + status = "okay"; + }; + + macb1: ethernet at f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +};
PATCH v2 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
In reply to Josh WuHello Josh,
Quoted 2 lines · Josh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in
sama5d3.dtsi.
Could you change the Copyright line in sama5d36.dtsi (I'm not sure I can get credits for something I haven't done :)) ?
Anyway,
Quoted 122 lines
Signed-off-by Josh Wu <[email protected]>---
v1 --> v2:
add a newsama5d36.dtsifile to include the peripheral dtsi file.arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 19 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-)create mode 100644
arch/arm/boot/dts/sama5d36.dtsicreate mode 100644arch/arm/boot/dts/sama5d36ek.dtsarch/arm/boot/dts/Makefile +1
-0@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \arch/arm/boot/dts/sama5d3.dtsi +1
-1@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>arch/arm/boot/dts/sama5d36.dtsi new file +19
-0@@ -0,0 +1,19 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Boris BREZILLON <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};arch/arm/boot/dts/sama5d36ek.dts new file +53
-0@@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi at f0004000 { + status = "okay"; + }; + + ssc0: ssc at f0008000 { + status = "okay"; + }; + + can0: can at f000c000 { + status = "okay"; + }; + + i2c0: i2c at f0014000 { + status = "okay"; + }; + + i2c1: i2c at f0018000 { + status = "okay"; + }; + + macb0: ethernet at f0028000 { + status = "okay"; + }; + + macb1: ethernet at f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +};