mx6: add structs for mmdc and ddr iomux registers
A message that is not in the archive (sent off-list or not yet received): 1383902865.3157.485.camel@edward-x220-laptop
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
--- arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h | 167 +++++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
(quoted diff) +0 -0
b/arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
new file mode 100644
index 0000000..dd5e892
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +167 -0
167 lines not on this page · raw message
Signature · 1 line
1.8.0
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
Hi Edward,
Quoted 17 lines · Edward Lin
Signed-off-by Edward Lin <[email protected]>--- arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h | 167 +++++++++++++++++++++++++++ 1 file changed, 167 insertions(+)create mode 100644
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.harch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +3
-0@@ -0,0 +1,167 @@ +/* +* Copyright (C) 2013 TechNexion Inc. +*
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 13
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+* Author: Edward Lin <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#ifndef __ASM_ARCH_MX6_DDR_REGS_H__ +#define __ASM_ARCH_MX6_DDR_REGS_H__ + +#define MX6_MMDC_P0_BASE 0x021b0000 +#define MX6_MMDC_P1_BASE 0x021b4000 +
These are already declared in
arch/arm/include/asm/arch-mx6/imx-regs.h
Quoted 4 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +4
-0+/* MMDC P0/P1 Registers */ +struct mmdc_p_regs { +u32 mdctl; +u32 mdpdc;
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 27
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+u32 mdotc; +u32 mdcfg0; +u32 mdcfg1; +u32 mdcfg2; +u32 mdmisc; +u32 mdscr; +u32 mdref; +u32 res1[2 ]; +u32 mdrwd; +u32 mdor;
Up to this point, this appears to be a mirror of struct esd_mmdc_regs from arch/arm/imx-common/cpu.c
Quoted 16 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +16
-0+u32 res2[3 ]; +u32 mdasp; +u32 res3[240 ]; +u32 mapsr; +u32 res4[254 ]; +u32 mpzqhwctrl; +u32 res5[2 ]; +u32 mpwldectrl0; +u32 mpwldectrl1; +u32 res6; +u32 mpodtctrl; +u32 mprddqby0dl; +u32 mprddqby1dl; +u32 mprddqby2dl; +u32 mprddqby3dl; +u32 res7[4 ];
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 53
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+u32 mpdgctrl0; +u32 mpdgctrl1; +u32 res8; +u32 mprddlctl; +u32 res9; +u32 mpwrdlctl; +u32 res10[25 ]; +u32 mpmur0; +}__attribute__((packed, aligned(4))); +
I'm not sure where you're headed with these...
It seems arbitrary to treat these as structures, and I'm guessing that you're going to want tables of values as is currently done in the DCD and declared in mx6q-ddr.h/mx6dl-ddr.h.
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 66
Quoted 13 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +13
-0+#define MX6Q_IOM_DDR_BASE 0x020e0500 +struct mx6q_iomux_ddr_regs { +u32 res1[3 ]; +u32 dram_sdqs5; +u32 dram_dqm5; +u32 dram_dqm4; +u32 dram_sdqs4; +u32 dram_sdqs3; +u32 dram_dqm3; +u32 dram_sdqs2; +u32 dram_dqm2; +u32 res2[16 ]; +u32 dram_cas;
...
Regards,
Eric
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
Quoted 25 lines · Eric Nelson
Hi Edward,
Quoted 22 lines · Edward Lin
Signed-off-by Edward Lin <[email protected]>--- arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h | 167 +++++++++++++++++++++++++++ 1 file changed, 167 insertions(+)create mode 100644
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.harch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +8
-0@@ -0,0 +1,167 @@ +/* +* Copyright (C) 2013 TechNexion Inc. +* +* Author: Edward Lin <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#ifndef __ASM_ARCH_MX6_DDR_REGS_H__
Quoted 9 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 13
Quoted 5 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +5
-0+#define __ASM_ARCH_MX6_DDR_REGS_H__ + +#define MX6_MMDC_P0_BASE 0x021b0000 +#define MX6_MMDC_P1_BASE 0x021b4000 +These are already declared in
arch/arm/include/asm/arch-mx6/imx-regs.h
Thanks for pointing that out, I agree.
Quoted 9 lines
Quoted 9 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +9
-0+/* MMDC P0/P1 Registers */ +struct mmdc_p_regs { +u32 mdctl; +u32 mdpdc; +u32 mdotc; +u32 mdcfg0; +u32 mdcfg1; +u32 mdcfg2; +u32 mdmisc;
Quoted 9 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 27
Quoted 5 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +5
-0+u32 mdscr; +u32 mdref; +u32 res1[2 ]; +u32 mdrwd; +u32 mdor;Up to this point, this appears to be a mirror of struct
esd_mmdc_regsfromarch/arm/imx-common/cpu.c
The struct defined in cpu.c is for all imx cpus, including imx5 and imx6. For this reason I would like to keep them separate. Our struct is for imx6 only.
Quoted 29 lines
Quoted 16 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +16
-0+u32 res2[3 ]; +u32 mdasp; +u32 res3[240 ]; +u32 mapsr; +u32 res4[254 ]; +u32 mpzqhwctrl; +u32 res5[2 ]; +u32 mpwldectrl0; +u32 mpwldectrl1; +u32 res6; +u32 mpodtctrl; +u32 mprddqby0dl; +u32 mprddqby1dl; +u32 mprddqby2dl; +u32 mprddqby3dl; +u32 res7[4 ];arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 53
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+u32 mpdgctrl0; +u32 mpdgctrl1; +u32 res8; +u32 mprddlctl; +u32 res9; +u32 mpwrdlctl; +u32 res10[25 ]; +u32 mpmur0; +}__attribute__((packed, aligned(4))); +I'm not sure where you're headed with these...
Quoted 5 lines
It seems arbitrary to treat these as structures, and I'm guessing that you're going to want tables of values as is currently done in the DCD and declared in
mx6q-ddr.h/mx6dl-ddr.h.
We been told by Stefano that use of structures is a strict rule.
Quoted 21 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 66
Quoted 13 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +13
-0+#define MX6Q_IOM_DDR_BASE 0x020e0500 +struct mx6q_iomux_ddr_regs { +u32 res1[3 ]; +u32 dram_sdqs5; +u32 dram_dqm5; +u32 dram_dqm4; +u32 dram_sdqs4; +u32 dram_sdqs3; +u32 dram_dqm3; +u32 dram_sdqs2; +u32 dram_dqm2; +u32 res2[16 ]; +u32 dram_cas;...
Regards,
Eric
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
In reply to Edward LinHi Edward,
Quoted 26 lines · Edward Lin
Signed-off-by Edward Lin <[email protected]>--- arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h | 167 +++++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 arch/arm/include/asm/arch-mx6/mx6_ddr_regs.harch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +12
-0@@ -0,0 +1,167 @@ +/* +* Copyright (C) 2013 TechNexion Inc. +* +* Author: Edward Lin <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#ifndef __ASM_ARCH_MX6_DDR_REGS_H__ +#define __ASM_ARCH_MX6_DDR_REGS_H__ + +#define MX6_MMDC_P0_BASE 0x021b0000 +#define MX6_MMDC_P1_BASE 0x021b4000
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 22
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+ +/* MMDC P0/P1 Registers */ +struct mmdc_p_regs { +u32 mdctl; +u32 mdpdc; +u32 mdotc; +u32 mdcfg0; +u32 mdcfg1; +u32 mdcfg2; +u32 mdmisc;
Ok - if these structure is to make it available for other components, it should replace the structure esd_mmdc_regs in cpu.c. We cannot have both.
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 53
Quoted 4 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +4
-0+u32 res10[25 ]; +u32 mpmur0; +}__attribute__((packed, aligned(4))); +
I am missing why the packed is needed.
Quoted 105 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +104
-0+#define MX6Q_IOM_DDR_BASE 0x020e0500 +struct mx6q_iomux_ddr_regs { +u32 res1[3 ]; +u32 dram_sdqs5; +u32 dram_dqm5; +u32 dram_dqm4; +u32 dram_sdqs4; +u32 dram_sdqs3; +u32 dram_dqm3; +u32 dram_sdqs2; +u32 dram_dqm2; +u32 res2[16 ]; +u32 dram_cas; +u32 res3[2 ]; +u32 dram_ras; +u32 dram_reset; +u32 res4[2 ]; +u32 dram_sdclk_0; +u32 dram_sdba2; +u32 dram_sdcke0; +u32 dram_sdclk_1; +u32 dram_sdcke1; +u32 dram_sdodt0; +u32 dram_sdodt1; +u32 res5; +u32 dram_sdqs0; +u32 dram_dqm0; +u32 dram_sdqs1; +u32 dram_dqm1; +u32 dram_sdqs6; +u32 dram_dqm6; +u32 dram_sdqs7; +u32 dram_dqm7; +}__attribute__((packed,aligned (4 ))); + +#define MX6Q_IOM_GRP_BASE 0x020e0700 +struct mx6q_iomux_grp_regs { +u32 res1[18 ]; +u32 grp_b7ds; +u32 grp_addds; +u32 grp_ddrmode_ctl; +u32 res2; +u32 grp_ddrpke; +u32 res3[6 ]; +u32 grp_ddrmode; +u32 res4[3 ]; +u32 grp_b0ds; +u32 grp_b1ds; +u32 grp_ctlds; +u32 res5; +u32 grp_b2ds; +u32 grp_ddr_type; +u32 grp_b3ds; +u32 grp_b4ds; +u32 grp_b5ds; +u32 grp_b6ds; +}__attribute__((packed,aligned (4 ))); + +#define MX6DL_IOM_DDR_BASE 0x020e0400 +struct mx6dl_iomux_ddr_regs { +u32 res1[25 ]; +u32 dram_cas; +u32 res2[2 ]; +u32 dram_dqm0; +u32 dram_dqm1; +u32 dram_dqm2; +u32 dram_dqm3; +u32 dram_dqm4; +u32 dram_dqm5; +u32 dram_dqm6; +u32 dram_dqm7; +u32 dram_ras; +u32 dram_reset; +u32 res3[2 ]; +u32 dram_sdba2; +u32 dram_sdcke0; +u32 dram_sdcke1; +u32 dram_sdclk_0; +u32 dram_sdclk_1; +u32 dram_sdodt0; +u32 dram_sdodt1; +u32 dram_sdqs0; +u32 dram_sdqs1; +u32 dram_sdqs2; +u32 dram_sdqs3; +u32 dram_sdqs4; +u32 dram_sdqs5; +u32 dram_sdqs6; +u32 dram_sdqs7; +}__attribute__((packed,aligned (4 ))); + +#define MX6DL_IOM_GRP_BASE 0x020e0700 +struct mx6dl_iomux_grp_regs { +u32 res1[18 ]; +u32 grp_b7ds; +u32 grp_addds; +u32 grp_ddrmode_ctl; +u32 grp_ddrpke; +u32 res2[2 ]; +u32 grp_ddrmode; +u32 grp_b0ds; +u32 res3; +u32 grp_ctlds; +u32 grp_b1ds;
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 167
Quoted 10 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+u32 grp_ddr_type; +u32 grp_b2ds; +u32 grp_b3ds; +u32 grp_b4ds; +u32 grp_b5ds; +u32 res4; +u32 grp_b6ds; +}__attribute__((packed, aligned(4))); + +#endif
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
Stefano,
I'll reply to this, since including the __attribute__ was my suggestion.
Quoted 7 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 53
Quoted 4 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +4
-0+u32 res10[25 ]; +u32 mpmur0; +}__attribute__((packed, aligned(4))); +I am missing why the packed is needed.
This was discussed before, and I tried to explain it already then.
Short answer: to make a broken design slightly less likely to cause problems.
Long answer: Using structs the way required by u-boot maintainers is invalid C. It is a compiler quirk that it happens to work. This is clear from ANSI C89
standard: http://www.lysator.liu.se/c/rat/c5.html#3-5-2-1
However people (like Microsoft famously with Office) kept shooting themselves in the foot with structure members and padding, this was clarified even further in the C99 standard (see pt. 1424 in
http://c0x.coding-guidelines.com/6.7.2.1.html )
Meanwhile, the gcc people added a compiler hint, __attribute__((packed)), to kindly ask the compiler not to add any padding structs. (So you guys certainly are not the first ones doing this kind of hacks :-).
While on topic, the aligned(4) is needed because of the packed attribute.
There is a drawback with the gcc __attribute__((packed)). The compiler might no longer be able to assume any alignment of the members (what if the struct resides on an odd address?). To remedy this some compilers create complicated code for accessing the struct members in a way that no CPU exceptions are raised, to make the structure accesses work (and some compilers just let the Bus Errors happen). The __attribute__((aligned(4))) tells the compiler that it may assume that the struct will always be aligned on a 4-byte boundary.
Quoted 5 lines
Quoted 5 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +5
-0+ +/* MMDC P0/P1 Registers */ +struct mmdc_p_regs { +u32 mdctl; +u32 mdpdc;
Quoted 9 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 22
Quoted 5 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +5
-0+u32 mdotc; +u32 mdcfg0; +u32 mdcfg1; +u32 mdcfg2; +u32 mdmisc;Ok - if these structure is to make it available for other components, it should replace the structure
esd_mmdc_regsincpu.c. We cannot have both.
So would you suggest we add a union inside the structure to differentiate imx5 and imx6? Or just make the structure imx6s/dl/q specific?
regards,
//Tapani
PATCH 2/4 mx6: add structs for mmdc and ddr iomux registers
Hi Tapani,
Quoted 21 lines · Tapani
Stefano,
I'll reply to this, since including the
__attribute__was my suggestion.Quoted 7 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 53
Quoted 4 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +4
-0+u32 res10[25 ]; +u32 mpmur0; +}__attribute__((packed, aligned(4))); +I am missing why the packed is needed.
This was discussed before, and I tried to explain it already then.
Short answer: to make a broken design slightly less likely to cause problems.
Long answer: Using structs the way required by u-boot maintainers is invalid C. It is a compiler quirk that it happens to work. This is clear from ANSI C89
standard: http://www.lysator.liu.se/c/rat/c5.html#3-5-2-1
Quoted 8 lines
However people (like Microsoft famously with Office) kept shooting themselves in the foot with structure members and padding, this was clarified even further in the C99 standard (see pt. 1424 in
http://c0x.coding-guidelines.com/6.7.2.1.html )Meanwhile, the gcc people added a compiler hint, __attribute__((packed)), to kindly ask the compiler not to add any padding structs. (So you guys certainly are not the first ones doing this kind of hacks :-).
The specific question should have been: why do we use packed when all fields in the structure are already u32 ? The compiler does not introduce padding, at least now : packed will be necessary if there are 16bit or 8 bit registers.
If gcc in the future will generate padding (let's say, all fields will become 64 bit), this become a general issue and must be globally fixed - I mean for all structures accessing to internal registers. But using this only here is not consistent.
Quoted 2 lines
While on topic, the aligned(4) is needed because of the packed attribute.
This is clear, but again, if we needed, the fix should go globally. Currently all structures in u-boot do not use it.
Quoted 4 lines
There is a drawback with the gcc __attribute__((packed)). The compiler might no longer be able to assume any alignment of the members (what if the struct resides on an odd address?).
In u-boot such as structures are not allocated, but there address is set in code, such as:
struct src *src_regs = (struct src *)SRC_BASE_ADDR;
of course, if SRC_ADDR is not aligned, it crashes - but this is a bug. I think (not tested) that if you force the compiler to align the address, and for example SRC_BASE_ADDR is not correct and set on an odd address, the compiler will force it to the nearest aligned address, that is presumably wrong and generates unpredictable results.
Quoted 5 lines
To remedy this some compilers create complicated
code for accessing the struct members in a way that no CPU exceptions are raised, to make the structure accesses work (and some compilers just let the Bus Errors happen). The __attribute__((aligned(4))) tells the compiler that it may assume that the struct will always be aligned on a 4-byte boundary.
But in the way u-boot uses the structures, a crash or CPU exception must be raised because it signals a bug.
Quoted 16 lines
Quoted 15 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h line 22
Quoted 11 lines
arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h new file +10
-0+ +/* MMDC P0/P1 Registers */ +struct mmdc_p_regs { +u32 mdctl; +u32 mdpdc; +u32 mdotc; +u32 mdcfg0; +u32 mdcfg1; +u32 mdcfg2; +u32 mdmisc;Ok - if these structure is to make it available for other components, it should replace the structure
esd_mmdc_regsincpu.c. We cannot have both.
Quoted 2 lines
So would you suggest we add a union inside the structure to differentiate imx5 and imx6? Or just make the structure imx6s/dl/q specific?
The main point is that I disagree on duplicating code. The same structure with your patch is defined twice, this cannot be.
The specific register layout is defined into the corresponding imx-regs.h (./arch/arm/include/asm/arch-mx5/imx-regs.h or ./arch/arm/include/asm/arch-mx6/imx-regs.h). If there is the same structure (let's say, the same controller with different layout) on different socs, you have to define the structures in the imx-regs.h for each SOC that uses that structure.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================