bridge: flush br's address entry in fdb when remove the bridge dev
Subsystems (3)
When the following commands are executed:
brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge
The calltrace will occur:
[ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered
------------------------- cut here ---------------------------
The reason is that if the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge.
Signed-off-by Ding Tianhong <[email protected]>
--- net/bridge/br_if.c | 4 ++++ 1 file changed, 4 insertions(+)
net/bridge/br_if.c +4 -0
@@ -172,6 +172,10 @@ void br_dev_delete(struct net_device *dev, struct list_head *head)del_nbp (p); } +spin_lock_bh (&br->hash_lock); +fdb_delete_by_addr (br, br->dev->dev_addr,0 ); +spin_unlock_bh (&br->hash_lock); +del_timer_sync (&br->gc_timer);br_sysfs_delbr (br->dev);
Signature · 1 line
1.7.12
Quoted 7 lines · Ding Tianhong
When the following commands are executed:
brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridgeThe calltrace will occur:
wrong title, miss it, please.