Skip to contentSkip to conversation

snd-oxygen: Changes for oxygen driver to fix the Xonar DG card

PATCH In review Roman Volkov 2 participants 3 messages Nov 19, 2013 – Nov 20, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 snd-oxygen: Changes for oxygen driver to fix the Xonar DG card

This patch does some preparation of existing Oxygen driver. Some constants added to the header files. To perform the SPI reading, there is a new function to wait when the SPI finishes a transaction. Channel routing must be updated when the user selects the audio output, and there are some extra symbols exported from the snd-oxygen-lib module.

---
Should not affect other models of Oxygen driver, but who knows.

sound/pci/oxygen/cs4245.h +3 -2
diff -uprN linux-3.12/sound/pci/oxygen/cs4245.h linux-3.12-my/sound/pci/oxygen/cs4245.h
@@ -103,5 +103,6 @@
 #define CS4245_ADC_UNDRFL	0x01
 
 
-#define CS4245_SPI_ADDRESS	(0x9e << 16)
-#define CS4245_SPI_WRITE	(0 << 16)
+#define CS4245_SPI_ADDRESS	0x9e
+#define CS4245_SPI_WRITE	0
+#define CS4245_SPI_READ		1
sound/pci/oxygen/oxygen.h +2 -1
diff -uprN linux-3.12/sound/pci/oxygen/oxygen.h linux-3.12-my/sound/pci/oxygen/oxygen.h
@@ -198,7 +198,8 @@ void oxygen_write_ac97(struct oxygen *ch
 void oxygen_write_ac97_masked(struct oxygen *chip, unsigned int codec,
 			      unsigned int index, u16 data, u16 mask);
 
-void oxygen_write_spi(struct oxygen *chip, u8 control, unsigned int data);
+int oxygen_wait_spi(struct oxygen *chip);
+int oxygen_write_spi(struct oxygen *chip, u8 control, unsigned int data);
 void oxygen_write_i2c(struct oxygen *chip, u8 device, u8 map, u8 data);
 
 void oxygen_reset_uart(struct oxygen *chip);
sound/pci/oxygen/oxygen_io.c +22 -10
diff -uprN linux-3.12/sound/pci/oxygen/oxygen_io.c linux-3.12-my/sound/pci/oxygen/oxygen_io.c
@@ -105,8 +105,8 @@ static int oxygen_ac97_wait(struct oxyge
 	 * Reading the status register also clears the bits, so we have to save
 	 * the read bits in status.
 	 */
-	wait_event_timeout(chip->ac97_waitqueue,
-			   ({ status |= oxygen_read8(chip, OXYGEN_AC97_INTERRUPT_STATUS);
+	wait_event_timeout(chip->ac97_waitqueue, ({ status |= oxygen_read8(chip,
+					OXYGEN_AC97_INTERRUPT_STATUS);
 			      status & mask; }),
 			   msecs_to_jiffies(1) + 1);
 	/*
@@ -194,23 +194,35 @@ void oxygen_write_ac97_masked(struct oxy
 }
 EXPORT_SYMBOL(oxygen_write_ac97_masked);
 
-void oxygen_write_spi(struct oxygen *chip, u8 control, unsigned int data)
+int oxygen_wait_spi(struct oxygen *chip)
 {
-	unsigned int count;
+	/* Higher interval to be sure - 100 microseconds */
+	unsigned int count = 100;
 
-	/* should not need more than 30.72 us (24 * 1.28 us) */
-	count = 10;
-	while ((oxygen_read8(chip, OXYGEN_SPI_CONTROL) & OXYGEN_SPI_BUSY)
-	       && count > 0) {
-		udelay(4);
-		--count;
+	for (;;) {
+		if ((oxygen_read8(chip, OXYGEN_SPI_CONTROL) &
+						OXYGEN_SPI_BUSY) == 0)
+			break;
+		if (count == 0) {
+			snd_printk(KERN_ERR "oxygen: spi wait timeout\n");
+			return -EIO;
+		}
+		udelay(1);
+		count--;
 	}
+	return 0;
+}
+EXPORT_SYMBOL(oxygen_wait_spi);
 
+int oxygen_write_spi(struct oxygen *chip, u8 control, unsigned int data)
+{
 	oxygen_write8(chip, OXYGEN_SPI_DATA1, data);
 	oxygen_write8(chip, OXYGEN_SPI_DATA2, data >> 8);
 	if (control & OXYGEN_SPI_DATA_LENGTH_3)
 		oxygen_write8(chip, OXYGEN_SPI_DATA3, data >> 16);
 	oxygen_write8(chip, OXYGEN_SPI_CONTROL, control);
+
+	return oxygen_wait_spi(chip);
 }
 EXPORT_SYMBOL(oxygen_write_spi);
 
sound/pci/oxygen/oxygen_mixer.c +1 -0
diff -uprN linux-3.12/sound/pci/oxygen/oxygen_mixer.c linux-3.12-my/sound/pci/oxygen/oxygen_mixer.c
@@ -190,6 +190,7 @@ void oxygen_update_dac_routing(struct ox
 	if (chip->model.update_center_lfe_mix)
 		chip->model.update_center_lfe_mix(chip, chip->dac_routing > 2);
 }
+EXPORT_SYMBOL(oxygen_update_dac_routing);
 
 static int upmix_put(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
 {
sound/pci/oxygen/oxygen_regs.h +1 -0
diff -uprN linux-3.12/sound/pci/oxygen/oxygen_regs.h linux-3.12-my/sound/pci/oxygen/oxygen_regs.h
@@ -318,6 +318,7 @@
 #define  OXYGEN_PLAY_MUTE23		0x0002
 #define  OXYGEN_PLAY_MUTE45		0x0004
 #define  OXYGEN_PLAY_MUTE67		0x0008
+#define  OXYGEN_PLAY_MUTE_MASK		0x000f
 #define  OXYGEN_PLAY_MULTICH_MASK	0x0010
 #define  OXYGEN_PLAY_MULTICH_I2S_DAC	0x0000
 #define  OXYGEN_PLAY_MULTICH_AC97	0x0010
maintainer
#1 lore raw

Many thanks for doing all this work!

However, there are still a few small problems.

Quoted 1 line · Roman Volkov

This patch does some preparation of existing Oxygen driver.

This patch should be separated into four logical changes.

sound/pci/oxygen/cs4245.h line 108

Quoted 6 lines

+++ linux-3.12-my/sound/pci/oxygen/cs4245.h 2013-11-15 15:46:40.000000000 +0400

sound/pci/oxygen/cs4245.h +3 -2
-#define CS4245_SPI_ADDRESS	(0x9e << 16)
-#define CS4245_SPI_WRITE	(0 << 16)
+#define CS4245_SPI_ADDRESS	0x9e
+#define CS4245_SPI_WRITE	0
+#define CS4245_SPI_READ		1

This is only part of a logical change; applying this patch alone would break the driver.

sound/pci/oxygen/oxygen_io.c static int oxygen_ac97_wait(struct oxyge · line 110

Quoted 6 lines

+++ linux-3.12-my/sound/pci/oxygen/oxygen_io.c 2013-11-19 00:56:12.000000000 +0400

sound/pci/oxygen/oxygen_io.c +2 -2
-	wait_event_timeout(chip->ac97_waitqueue,
-			   ({ status |= oxygen_read8(chip, OXYGEN_AC97_INTERRUPT_STATUS);
+	wait_event_timeout(chip->ac97_waitqueue, ({ status |= oxygen_read8(chip,
+					OXYGEN_AC97_INTERRUPT_STATUS);
 			      status & mask; }),

Why this change?

sound/pci/oxygen/oxygen_io.c void oxygen_write_ac97_masked(struct oxy · line 210

Quoted 4 lines
sound/pci/oxygen/oxygen_io.c +2 -1
+int oxygen_wait_spi(struct oxygen *chip)
...
-		udelay(4);
+		udelay(1);

Please don't reduce this delay; the CMI8788 has a bug that can crash the machine if this register is polled too often.

Quoted 1 line

+EXPORT_SYMBOL(oxygen_wait_spi);

Why this export?

Quoted 3 lines

+++ linux-3.12-my/sound/pci/oxygen/oxygen_mixer.c 2013-11-18 14:03:54.000000000 +0400

+EXPORT_SYMBOL(oxygen_update_dac_routing);

This should be integrated into the patch that adds the actual call.

Regards,
Clemens

#2 lore raw

В Tue, 19 Nov 2013 23:23:41 +0100
Clemens Ladisch <[email protected]> пишет:

Quoted 7 lines

Many thanks for doing all this work!
However, there are still a few small problems.

Quoted 1 line · Roman Volkov

This patch does some preparation of existing Oxygen driver.

This patch should be separated into four logical changes.

Okay, will split this and send again, considering all your comments.

Quoted 12 lines
Quoted 10 lines

+++ linux-3.12-my/sound/pci/oxygen/oxygen_io.c 2013-11-19
00:56:12.000000000 +0400

(quoted diff) +0 -2
-	wait_event_timeout(chip->ac97_waitqueue,
-			   ({ status |= oxygen_read8(chip,

OXYGEN_AC97_INTERRUPT_STATUS);

(quoted diff) +1 -0
+	wait_event_timeout(chip->ac97_waitqueue, ({ status |=

oxygen_read8(chip,
+
OXYGEN_AC97_INTERRUPT_STATUS); status & mask; }),

Why this change?

Just checkpatch.pl popped me a warning (80 columns exceeded), and I occasionally changed this. Will revert this as this code is already in the kernel.

Quoted 11 lines

sound/pci/oxygen/oxygen_io.c void oxygen_write_ac97_masked(struct oxy · line 210

Quoted 4 lines
sound/pci/oxygen/oxygen_io.c +2 -1
+int oxygen_wait_spi(struct oxygen *chip)
...
-		udelay(4);
+		udelay(1);

Please don't reduce this delay; the CMI8788 has a bug that can crash the machine if this register is polled too often.

Quoted 1 line

+EXPORT_SYMBOL(oxygen_wait_spi);

Why this export?

However yes, when I moved wait call to the end of oxygen_write_spi(), additional waiting is not necessary. Will be the static function.

Quoted 11 lines
Quoted 4 lines

+++ linux-3.12-my/sound/pci/oxygen/oxygen_mixer.c 2013-11-18
14:03:54.000000000 +0400

+EXPORT_SYMBOL(oxygen_update_dac_routing);

This should be integrated into the patch that adds the actual call.

Regards,
Clemens

Kind regards,
Roman Volkov
[email protected]
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel