ARM: at91: at91sam9x5: mmc: save environment as a FAT file (uboot.env)
PATCH 1/2 ARM: at91: at91sam9x5: mmc: save environment as a FAT file (uboot.env)
This patch will save U-Boot environment as a file: uboot.env, in FAT partition instead of saving it in raw sector of SD card.
Since saving environment in raw sector has risk of corrupting the SD card and only can use very small size. Save as a FAT file has no above limitation.
--- include/configs/at91sam9x5ek.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
include/configs/at91sam9x5ek.h +7 -5
@@ -205,11 +205,13 @@ "bootm 0x22000000"#else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1 +#define CONFIG_ENV_SIZE 0x4000#endif #ifdef CONFIG_SYS_USE_MMC
Signature · 1 line
1.7.9.5
PATCH 2/2 ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)
This patch will save U-Boot environment as a file: uboot.env, in FAT partition instead of saving it in raw sector of SD card.
Since saving environment in raw sector has risk of corrupting the SD card and only can use very small size. Save as a FAT file has no above limitation.
--- include/configs/sama5d3xek.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
include/configs/sama5d3xek.h +7 -3
@@ -196,9 +196,13 @@ "bootm 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1 +#define CONFIG_ENV_SIZE 0x4000#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000"
Signature · 1 line
1.7.9.5
PATCH 2/2 ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)
Hi Josh,
Quoted 10 lines · Josh Wu
This patch will save U-Boot environment as a file: uboot.env, in FAT partition instead of saving it in raw sector of SD card.
Since saving environment in raw sector has risk of corrupting the SD card and only can use very small size. Save as a FAT file has no above limitation.
Signed-off-by Josh Wu <[email protected]>--- include/configs/sama5d3xek.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
Tested on sama5d31ek board. It doesn't work. Please check it, and also check on at91sam9x5ek board.
Please take the following information as a reference. --->8---
U-Boot 2013.10-00389-gf37e980 (Nov 22 2013 - 17:56:53)
CPU: SAMA5D31 Crystal frequency: 12 MHz CPU clock : 528 MHz Master clock : 132 MHz DRAM: 512 MiB NAND: 256 MiB MMC: mci: 0 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 22000000 Hz, block size 512
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 ** Using default environment
In: serial Out: serial Err: serial Net: macb0 Warning: failed to set MAC address
, usb_ether
Hit any key to stop autoboot: 0
U-Boot> fat
fatinfo fatload fatls fatwrite
U-Boot> fatls mmc 0
20737 boot.bin
332916 u-boot.bin2 file(s), 0 dir(s)
U-Boot> saveenv
Saving Environment to FAT...
mci: setting clock 257812 Hz, block size 512
mci: setting clock 22000000 Hz, block size 512
mci: setting clock 257812 Hz, block size 512
mci: setting clock 257812 Hz, block size 512
mci: setting clock 22000000 Hz, block size 512 writing uboot.env
done
U-Boot> fatls mmc 0
20737 boot.bin
332916 u-boot.bin2 file(s), 0 dir(s)
---8<---
Quoted 12 lines
include/configs/sama5d3xek.h +0
-3@@ -196,9 +196,13 @@"bootm 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000
include/configs/sama5d3xek.h line 208
Quoted 10 lines
include/configs/sama5d3xek.h +7
-0+#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1 +#define CONFIG_ENV_SIZE 0x4000#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000"
Best Regards,
Bo Shen
PATCH 2/2 ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)
Quoted 66 lines · Bo Shen
Hi Josh,
Quoted 9 lines · Josh Wu
This patch will save U-Boot environment as a file: uboot.env, in FAT partition
instead of saving it in raw sector of SD card.Since saving environment in raw sector has risk of corrupting the SD card and
only can use very small size. Save as a FAT file has no above limitation.Quoted 4 lines
Signed-off-by Josh Wu <[email protected]>--- include/configs/sama5d3xek.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)Tested on sama5d31ek board. It doesn't work. Please check it, and also check on at91sam9x5ek board.
Please take the following information as a reference. --->8---
U-Boot 2013.10-00389-gf37e980 (Nov 22 2013 - 17:56:53)CPU: SAMA5D31 Crystal frequency: 12 MHz CPU clock : 528 MHz Master clock : 132 MHz DRAM: 512 MiB NAND: 256 MiB MMC: mci: 0 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 257812 Hz, block size 512 mci: setting clock 22000000 Hz, block size 512reading uboot.env
** Unable to read "uboot.env" from mmc0:1 ** Using default environment
In: serial Out: serial Err: serial Net: macb0 Warning: failed to set MAC address,
usb_ether
Hit any key to stop autoboot: 0
U-Boot> fat
fatinfo fatload fatls fatwrite
U-Boot> fatls mmc 020737 boot.bin332916 u-boot.bin
2 file(s), 0 dir(s)
U-Boot> saveenv
Saving Environment to FAT...
mci: setting clock 257812 Hz, block size 512
mci: setting clock 22000000 Hz, block size 512
mci: setting clock 257812 Hz, block size 512
mci: setting clock 257812 Hz, block size 512
mci: setting clock 22000000 Hz, block size 512 writing uboot.env
done
U-Boot> fatls mmc 0
Quoted 5 lines
20737 boot.bin332916 u-boot.bin
2 file(s), 0 dir(s)
---8<---
Oops, this indeed happened in my side too. I will follow on this issue. Thanks for the testing.
Quoted 18 lines
Quoted 18 lines
include/configs/sama5d3xek.h +6
-3@@ -196,9 +196,13 @@ "bootm 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1
Quoted 8 lines
include/configs/sama5d3xek.h line 208
Quoted 5 lines
include/configs/sama5d3xek.h +1
-0+#define CONFIG_ENV_SIZE 0x4000#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000"Best Regards,
Bo Shen
Best Regards,
Josh Wu