Skip to contentSkip to conversation

ipmi: setting mod_timer for read_event_msg buffer cmd

PATCH In review [email protected] 2 participants 9 messages Nov 25, 2013 – Dec 5, 2013 1 message not in the archive IPMI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ipmi: setting mod_timer for read_event_msg buffer cmd

Setting up mod_timer() for IPMI_READ_EVENT_MSG_BUFFER_CMD.
Driver stalls in case we hit error cases for IPMI_READ_EVENT_MSG_BUFFER_CMD.

---
 drivers/char/ipmi/ipmi_si_intf.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/char/ipmi/ipmi_si_intf.c +3 -0
index 15e4a60..affcc52 100644
@@ -843,6 +843,9 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 		smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 		smi_info->curr_msg->data_size = 2;
 
+		smi_info->last_timeout_jiffies = jiffies;
+		mod_timer(&smi_info->si_timer, (jiffies + SI_TIMEOUT_JIFFIES));
+
 		smi_info->handlers->start_transaction(
 			smi_info->si_sm,
 			smi_info->curr_msg->data,
Signature · 1 line
1.8.1.2
#1 lore raw
Quoted 13 lines · On 11/25/2013 03:51 AM, [email protected] wrote:

Setting up mod_timer() for IPMI_READ_EVENT_MSG_BUFFER_CMD.
Driver stalls in case we hit error cases for IPMI_READ_EVENT_MSG_BUFFER_CMD.

---
 drivers/char/ipmi/ipmi_si_intf.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/char/ipmi/ipmi_si_intf.c +0 -0
index 15e4a60..affcc52 100644

drivers/char/ipmi/ipmi_si_intf.c static enum si_sm_result smi_event_handler(struct smi_info *smi_info, · line 848

Quoted 6 lines
drivers/char/ipmi/ipmi_si_intf.c +3 -0
@@ -843,6 +843,9 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 		smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 		smi_info->curr_msg->data_size = 2;
 
+		smi_info->last_timeout_jiffies = jiffies;
+		mod_timer(&smi_info->si_timer, (jiffies + SI_TIMEOUT_JIFFIES));
+

This change is not correct and will mess up timing. That code is called from a number of places and that's where the timer modification should be done, if any are required. I can't imagine how this change would make a difference, but if it does, it points to a bug elsewhere in the code (or possibly in the BMC), not here.

-corey

Quoted 3 lines
drivers/char/ipmi/ipmi_si_intf.c +0 -0
 		smi_info->handlers->start_transaction(
 			smi_info->si_sm,
 			smi_info->curr_msg->data,

A message that is not in the archive (sent off-list or not yet received): 75F7F7632819D94BA80703D8B1F10B6D29CEE95A1D@BLRX7MCDC201.AMER.DELL.COM

#3 lore raw
Quoted 22 lines · On 11/27/2013 04:34 AM, [email protected] wrote:

*Dell - Internal Use - Confidential *

I hit a bug during one of our stress tests, Here is the issue that I am looking at.

We have IPMI_READ_EVENT_MSG_BUFFER_CMD getting invoked from smi_event_handler.

In case we hit error scenario, say "OBF not ready in time" we do not have smi_timeout driving the interface.

Seems like the timer is not armed when we invoke IPMI_READ_EVENT_MSG_BUFFER_CMD from smi_event_handler.

For the proposed patch I checked the return value of mod_timer just before smi_info->handlers->start_transaction, that returns 0 !!!

gWithout smi_timeout handler getting called periodically, if the BMC fails to set OBF flag during the msg transaction of IPMI_READ_EVENT_MSG_BUFFER_CMD,

Quoted 9 lines

the driver just keeps looping until the flag is set. Ideally we would want BMC to set the flag, but in case it doesn’t we do not want the driver to loop indefinitely rather hit KCS_ERROR states.

To summarize, we do not have timer set to invoke smi_timeout() when we call IPMI_READ_EVENT_MSG_BUFFER_CMD from smi_event_handler.

Do you feel there is a better way to fix it or a bug elsewhere…!

Ok, I think I know what is happening, and I think I have a fix. I'm betting that you have interrupts on this, and
I found a situation where if an interrupt came in at a certain time, it wouldn't start the timer. The attached patch should fix the problem.

Can you try this out?

Thanks for the detailed description.

-corey

Quoted 1 line

From a3dcd3ce65c4072acd707a000ba30ff917d52ef3 Mon Sep 17 00:00:00 2001

From: Corey Minyard <[email protected]>
Date: Fri, 29 Nov 2013 18:13:45 -0600
Subject: [PATCH] IPMI: Start the timer properly in certain situations

If using interrupt, or in some cases with the IPMI thread, the IPMI timer would not be started to time out operations, resulting in the driver operation hanging.

---
 drivers/char/ipmi/ipmi_si_intf.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +14 -3
index 68c5ef5..a8dfd94 100644
@@ -981,6 +981,13 @@ static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 	return 1;
 }
 
+static void ipmi_start_timer_if_necessary(struct smi_info *smi_info)
+{
+	if (!timer_pending(&smi_info->si_timer)) {
+		mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+		smi_info->last_timeout_jiffies = jiffies;
+	}
+}
 
 /*
  * A busy-waiting loop for speeding up IPMI operation.
@@ -1014,8 +1021,10 @@ static int ipmi_thread(void *data)
 			schedule();
 		else if (smi_result == SI_SM_IDLE)
 			schedule_timeout_interruptible(100);
-		else
+		else {
+			ipmi_start_timer_if_necessary(smi_info);
 			schedule_timeout_interruptible(1);
+		}
 	}
 	return 0;
 }
@@ -1118,7 +1127,8 @@ static irqreturn_t si_irq_handler(int irq, void *data)
 	do_gettimeofday(&t);
 	printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
-	smi_event_handler(smi_info, 0);
+	if (smi_event_handler(smi_info, 0) != SI_SM_IDLE)
+		ipmi_start_timer_if_necessary(smi_info);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 	return IRQ_HANDLED;
 }
@@ -1979,7 +1989,8 @@ static u32 ipmi_acpi_gpe(acpi_handle gpe_device,
 	do_gettimeofday(&t);
 	printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
-	smi_event_handler(smi_info, 0);
+	if (smi_event_handler(smi_info, 0) != SI_SM_IDLE)
+		ipmi_start_timer_if_necessary(smi_info);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 
 	return ACPI_INTERRUPT_HANDLED;
Signature · 1 line
1.8.3.1
#4 lore raw

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

---
 drivers/char/ipmi/ipmi_si_intf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
+		ipmi_start_timer_if_necessary(smi_info);
 		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
 			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
Signature · 5 lines
1.8.1.2
  

Thanks,
G
Quoted 43 lines · Corey Minyard
Quoted 22 lines · On 11/27/2013 04:34 AM, [email protected] wrote:

*Dell - Internal Use - Confidential *

I hit a bug during one of our stress tests, Here is the issue that I am looking at.

We have IPMI_READ_EVENT_MSG_BUFFER_CMD getting invoked from smi_event_handler.

In case we hit error scenario, say "OBF not ready in time" we do not have smi_timeout driving the interface.

Seems like the timer is not armed when we invoke IPMI_READ_EVENT_MSG_BUFFER_CMD from smi_event_handler.

For the proposed patch I checked the return value of mod_timer just before smi_info->handlers->start_transaction, that returns 0 !!!

gWithout smi_timeout handler getting called periodically, if the BMC fails to set OBF flag during the msg transaction of IPMI_READ_EVENT_MSG_BUFFER_CMD,

Quoted 9 lines

the driver just keeps looping until the flag is set. Ideally we would want BMC to set the flag, but in case it doesn’t we do not want the driver to loop indefinitely rather hit KCS_ERROR states.

To summarize, we do not have timer set to invoke smi_timeout() when we call IPMI_READ_EVENT_MSG_BUFFER_CMD from smi_event_handler.

Do you feel there is a better way to fix it or a bug elsewhere…!

Ok, I think I know what is happening, and I think I have a fix. I'm betting that you have interrupts on this, and
I found a situation where if an interrupt came in at a certain time, it wouldn't start the timer. The attached patch should fix the problem.

Can you try this out?

Thanks for the detailed description.

-corey

#5 lore raw
Quoted 8 lines · On 12/02/2013 08:49 AM, [email protected] wrote:

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.

The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on.

-corey

Quoted 18 lines
---
 drivers/char/ipmi/ipmi_si_intf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
+		ipmi_start_timer_if_necessary(smi_info);
 		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
 			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
#6 lore raw

Dell - Internal Use - Confidential

Hi Corey,

Quoted 1 line

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.

I still see the issue after applying the patch.
I have one question, for commands such as IPMI_READ_EVENT_MSG_BUFFER_CMD in smi_event_handler() that are invoked by the driver itself where do you expect the timer to be set ??

Quoted 1 line

The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on.

ipmi_thread() is getting invoked when the issue is seen, but I keep hitting this condition
else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
Since the timer is not armed for IPMI_READ_EVENT_MSG_BUFFER_CMD, smi_event_handler calls with time value 0, which doesn't help when OBF is stuck. We keep running around this loop since we never hit the kcs error states.

Thanks,
G

-----Original Message-----
From: Corey Minyard [mailto:[email protected]] On Behalf Of Corey Minyard
Sent: Tuesday, December 03, 2013 2:34 AM
To: Gowda, Srinivas G
Cc: [email protected]; [email protected]; [email protected]

Quoted 8 lines · Subject: Re: [PATCH 1/1] ipmi: setting mod_timer for read_event_msg buffer cmd…

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function
ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

Unfortunately, that would start the timer unnecessarily.  You don't want to start timers unnecessarily in the kernel or the power management police will come after you.
The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing.  Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck.  I'm suspicious now that something else is going on. -corey

Quoted 20 lines

---
  drivers/char/ipmi/ipmi_si_intf.c | 1 +

  1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
                spin_unlock_irqrestore(&(smi_info->si_lock), flags);
                busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
                                                  &busy_until);
+             ipmi_start_timer_if_necessary(smi_info);
                if (smi_result == SI_SM_CALL_WITHOUT_DELAY)

                       ; /* do nothing */
               else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)

#7 lore raw
Quoted 6 lines · On 12/03/2013 12:18 AM, [email protected] wrote:

Dell - Internal Use - Confidential

Hi Corey,

Quoted 1 line

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.

I still see the issue after applying the patch.
I have one question, for commands such as IPMI_READ_EVENT_MSG_BUFFER_CMD in smi_event_handler() that are invoked by the driver itself where do you expect the timer to be set ??

The timer should be done by the calling function. Since the timer is actually used to time out complete operations, you don't want to reset it from interrupts or the kthread. The patch I added would start the timer if it wasn't running and the event returned something non-idle.

So what should happen is smi_event_handler() starts the event message buffer read, goes back to the top of smi_event_handler() and handles the new message. It should return something besides idle in that case. And thus the timer should be started.

Quoted 5 lines
Quoted 1 line

The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on.

ipmi_thread() is getting invoked when the issue is seen, but I keep hitting this condition
else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
Since the timer is not armed for IPMI_READ_EVENT_MSG_BUFFER_CMD, smi_event_handler calls with time value 0, which doesn't help when OBF is stuck. We keep running around this loop since we never hit the kcs error states.

Maybe the timer start function needs to be called from that else clause, but it didn't seem so to me. It wouldn't hurt, I suppose. But the event handler should eventually return something non-idle and the timer start function should get called. Is the ipmi thread just stuck using 100% CPU? Does the final else clause ever get hit? Maybe the bug is in ipmi_thread_busy_wait().

Thanks,

-corey

Quoted 41 lines

Thanks,
G

-----Original Message-----
From: Corey Minyard [mailto:[email protected]] On Behalf Of Corey Minyard
Sent: Tuesday, December 03, 2013 2:34 AM
To: Gowda, Srinivas G
Cc: [email protected]; [email protected]; [email protected]

Quoted 8 lines · Subject: Re: [PATCH 1/1] ipmi: setting mod_timer for read_event_msg buffer cmd…

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function
ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.
The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on. -corey

Quoted 19 lines
---
  drivers/char/ipmi/ipmi_si_intf.c | 1 +
  1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
               spin_unlock_irqrestore(&(smi_info->si_lock), flags);
               busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
                                                 &busy_until);
+             ipmi_start_timer_if_necessary(smi_info);
               if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
                       ; /* do nothing */
               else if (smi_result == SI_SM_CALL_WITH_DELAY && 

busy_wait)

#8 lore raw
Quoted 24 lines · Corey Minyard
Quoted 6 lines · On 12/03/2013 12:18 AM, [email protected] wrote:

Dell - Internal Use - Confidential

Hi Corey,

Quoted 1 line

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.

I still see the issue after applying the patch.
I have one question, for commands such as IPMI_READ_EVENT_MSG_BUFFER_CMD in smi_event_handler() that are invoked by the driver itself where do you expect the timer to be set ??

The timer should be done by the calling function. Since the timer is actually used to time out complete operations, you don't want to reset it from interrupts or the kthread. The patch I added would start the timer if it wasn't running and the event returned something non-idle.

So what should happen is smi_event_handler() starts the event message buffer read, goes back to the top of smi_event_handler() and handles the new message. It should return something besides idle in that case. And thus the timer should be started.

Quoted 5 lines
Quoted 1 line

The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on.

ipmi_thread() is getting invoked when the issue is seen, but I keep hitting this condition
else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
Since the timer is not armed for IPMI_READ_EVENT_MSG_BUFFER_CMD, smi_event_handler calls with time value 0, which doesn't help when OBF is stuck. We keep running around this loop since we never hit the kcs error states.

Quoted 5 lines

Maybe the timer start function needs to be called from that else clause, but it didn't seem so to me. It wouldn't hurt, I suppose. But the event handler should eventually return something non-idle and the timer start function should get called. Is the ipmi thread just stuck using 100% CPU?

Yes

Quoted 3 lines

Does the final else clause ever get hit? Maybe the bug is in ipmi_thread_busy_wait().

No, I did not see final else in ipmi_thread ever getting hit.

I am looking at ipmi_thread_busy_wait(),
by default the below condition never gets set unitl I explicetly set "kipmid_max_busy_us" to some value.
if (smi_info->intf_num < num_max_busy_us)

This means by default "max_busy_us" is always 0. Hence Ill basically end up only doing this if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)

                ipmi_si_set_not_busy(busy_until);

That probably explains why I never hit the else condition in ipmi_thread.

I see ipmi_start_timer_if_necessary() getting called from ipmi_thread() after setting "kipmid_max_busy_us" Ill set "kipmid_max_busy_us=300" and run the stress. I am hoping that we will not see the issue in this case.

Thanks,
G

Quoted 46 lines

Thanks,

-corey

Quoted 41 lines

Thanks,
G

-----Original Message-----
From: Corey Minyard [mailto:[email protected]] On Behalf Of Corey Minyard
Sent: Tuesday, December 03, 2013 2:34 AM
To: Gowda, Srinivas G
Cc: [email protected]; [email protected]; [email protected]

Quoted 8 lines · Subject: Re: [PATCH 1/1] ipmi: setting mod_timer for read_event_msg buffer cmd…

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function
ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.
The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on. -corey

Quoted 19 lines
---
  drivers/char/ipmi/ipmi_si_intf.c | 1 +
  1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
               spin_unlock_irqrestore(&(smi_info->si_lock), flags);
               busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
                                                 &busy_until);
+             ipmi_start_timer_if_necessary(smi_info);
               if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
                       ; /* do nothing */
               else if (smi_result == SI_SM_CALL_WITH_DELAY && 

busy_wait)

#9 lore raw
Quoted 8 lines

No, I did not see final else in ipmi_thread ever getting hit.

I am looking at ipmi_thread_busy_wait(),
by default the below condition never gets set unitl I explicetly set "kipmid_max_busy_us" to some value.
if (smi_info->intf_num < num_max_busy_us)

Quoted 9 lines

This means by default "max_busy_us" is always 0. Hence Ill basically end up only doing this if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)

                ipmi_si_set_not_busy(busy_until);

That probably explains why I never hit the else condition in ipmi_thread.

I see ipmi_start_timer_if_necessary() getting called from ipmi_thread() after setting "kipmid_max_busy_us" Ill set "kipmid_max_busy_us=300" and run the stress. I am hoping that we will not see the issue in this case.

I don't see the issue after this change. (I am going to try again just to be sure) I am trying to figure out how to hit ipmi_start_timer_if_necessary() in default mode...!

Thanks,
G

Quoted 55 lines

Thanks,
G

Quoted 46 lines

Thanks,

-corey

Quoted 41 lines

Thanks,
G

-----Original Message-----
From: Corey Minyard [mailto:[email protected]] On Behalf Of Corey Minyard
Sent: Tuesday, December 03, 2013 2:34 AM
To: Gowda, Srinivas G
Cc: [email protected]; [email protected]; [email protected]

Quoted 8 lines · Subject: Re: [PATCH 1/1] ipmi: setting mod_timer for read_event_msg buffer cmd…

Thanks for the patch Corey.
I am afraid that the system does not have interrupts enabled. It uses polling mode.

When the error is seen, I know for a fact that in function
ipmi_thread() smi_result is SI_SM_CALL_WITH_DELAY, I have some logs where in busy_wait always reads as 1. Not sure if it was ever set to 0. (ill check this again). Ill anyway run the test using the patch that you have shared.

b/w would it harm if we were to do to something like this ?

Unfortunately, that would start the timer unnecessarily. You don't want to start timers unnecessarily in the kernel or the power management police will come after you.
The patch I sent did have this call in the non-idle portion of the kernel thread and that should have done the same thing. Plus, if you are using the kernel thread, it's going to run periodically and should kick things off again if they get stuck. I'm suspicious now that something else is going on. -corey

Quoted 19 lines
---
  drivers/char/ipmi/ipmi_si_intf.c | 1 +
  1 file changed, 1 insertion(+)
drivers/char/ipmi/ipmi_si_intf.c +1 -0
index 15e4a60..e23484f 100644
@@ -1008,6 +1008,7 @@ static int ipmi_thread(void *data)
               spin_unlock_irqrestore(&(smi_info->si_lock), flags);
               busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
                                                 &busy_until);
+             ipmi_start_timer_if_necessary(smi_info);
               if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
                       ; /* do nothing */
               else if (smi_result == SI_SM_CALL_WITH_DELAY && 

busy_wait)