Kesytone II USB support
Subsystems (4)
cover Kesytone II USB support
Series adds USB host support for Keystone SOCs. Keystone SOCs uses dwc3 hardware IP implementation. On Keystone II platforms, we use no-op phy driver.
All three patches are posted together just for completeness. Only first patch is expected to go via usb tree and other two via linux-keystone tree.
Patchset are tested on Keystone II EVM with USB2.0 and USB3.0 flash drives.
WingMan Kwok (3):
usb: dwc3: Add Keystone specific glue layer
ARM: dts: keystone: Add usb devicetree bindings
ARM: keystone: defconfig: enable USB host mode support
.../devicetree/bindings/usb/keystone-usb.txt | 43 ++++ arch/arm/boot/dts/keystone.dtsi | 27 ++ arch/arm/configs/keystone_defconfig | 20 +- drivers/usb/dwc3/Kconfig | 7 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 272 ++++++++++++++++++++ 6 files changed, 369 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txt create mode 100644 drivers/usb/dwc3/dwc3-keystone.c
Signature · 1 line
1.7.9.5
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Add Keystone platform specific glue layer to support USB3 Host mode.
--- drivers/usb/dwc3/Kconfig | 7 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 272 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 280 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-keystone.c
drivers/usb/dwc3/Kconfig +7 -0
@@ -70,6 +70,13 @@ config USB_DWC3_PCI One such PCIe-based platform is Synopsys' PCIe HAPS model of this IP. +config USB_DWC3_KEYSTONE + tristate "Texas Instruments Keystone2 Platforms" + default USB_DWC3 + help + Support of USB2/3 functionality in TI Keystone2 platforms. + Say 'Y' or 'M' here if you have one such device + comment "Debugging features" config USB_DWC3_DEBUG
drivers/usb/dwc3/Makefile +1 -0
@@ -32,3 +32,4 @@ endif obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o +obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
drivers/usb/dwc3/dwc3-keystone.c new file +272 -0
272 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Hi,
drivers/usb/dwc3/dwc3-keystone.c line 6
Quoted 12 lines · WingMan Kwok
drivers/usb/dwc3/dwc3-keystone.c new file +6
-0@@ -0,0 +1,272 @@ +/** +* dwc3-keystone.c - Keystone Specific Glue layer +* +* Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com +* +* Authors: WingMan Kwok <[email protected]>
singular -> Author :-) there's only a single one.
Quoted 16 lines
drivers/usb/dwc3/dwc3-keystone.c new file +16
-0+* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 of +* the License as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h>
drivers/usb/dwc3/dwc3-keystone.c line 33
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/usb/usb_phy_gen_xceiv.h> + + +#define BITS (n) (BIT(n) - 1)
looks like unnecessary obfuscation.
drivers/usb/dwc3/dwc3-keystone.c line 34
Quoted 1 line
drivers/usb/dwc3/dwc3-keystone.c new file +1
-0+#define BITFIELD (x, s, n) (((x) & BITS(n)) << (s))
likewise.
drivers/usb/dwc3/dwc3-keystone.c line 35
Quoted 1 line
drivers/usb/dwc3/dwc3-keystone.c new file +1
-0+#define MASK 0xffffffff
huh ? You probably want a better name here.
drivers/usb/dwc3/dwc3-keystone.c line 36
Quoted 1 line
drivers/usb/dwc3/dwc3-keystone.c new file +1
-0+#define PHY_REF_SSP_EN (x) BITFIELD(x, 29, 1)
hmm, should be part of a PHY driver (drivers/phy/)
drivers/usb/dwc3/dwc3-keystone.c line 47
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+static u64 kdwc3_dma_mask; + +struct kdwc3_phy_ctrl_regs { +u32 phy_utmi; +u32 phy_pipe; +u32 phy_param_ctrl_1; +u32 phy_param_ctrl_2; +u32 phy_clock; +u32 phy_pll; +};
should be part of a PHY driver. Sorry, but I'll be very pedantic.
Quoted 4 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+struct kdwc3_irq_regs { +u32 revision; +u32 _rsvd0[3 ]; +u32 sysconfig;
drivers/usb/dwc3/dwc3-keystone.c line 62
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+u32 _rsvd1[1 ]; +u32 irq_eoi; +u32 _rsvd2[1 ]; +struct { +u32 raw_status; +u32 status; +u32 enable_set; +u32 enable_clr; + } irqs[16 ]; +};
please use #define macros instead.
drivers/usb/dwc3/dwc3-keystone.c line 70
Quoted 7 lines
drivers/usb/dwc3/dwc3-keystone.c new file +7
-0+struct dwc3_keystone { +spinlock_t lock; +struct device *dev; +struct clk *clk; +int irqn; + +struct kdwc3_phy_ctrl_regs __iomem *phy_ctrl;
not part of this driver.
drivers/usb/dwc3/dwc3-keystone.c line 76
Quoted 6 lines
drivers/usb/dwc3/dwc3-keystone.c new file +6
-0+struct kdwc3_irq_regs __iomem *usbss; +}; + +static void kdwc3_enable_irqs (struct dwc3_keystone *kdwc) +{ +writel (1 , &kdwc->usbss->irqs[kdwc->irqn].enable_set);
I would like to have a define here, no magic constants.
drivers/usb/dwc3/dwc3-keystone.c line 82
Quoted 6 lines
drivers/usb/dwc3/dwc3-keystone.c new file +6
-0+} + +static void kdwc3_disable_irqs (struct dwc3_keystone *kdwc) +{ +writel (0 , &kdwc->usbss->irqs[kdwc->irqn].enable_set); +}
you want these two functions to be more generic, along the lines of:
static void kdwc3_writel(void __iomem *base, u32 offset, u32 val)
{
writel(val, base + offset);
}static u32 kdwc3_readl(void __iomem *base, u32 offset)
{
return readl(base + offset);
}then you can add:
static void kdwc3_enable_irqs(struct dwc3_keystone *kdwc)
{
u32 reg;
reg = kdwc3_readl(kdwc->base, KEYSTONE_DWC3_IRQ);
reg |= KEYSTONE_DWC3_IRQ_ENABLE;
kdwc3_writel(kdwc->base, KEYSTONE_DWC3_IRQ, reg);
}static void kdwc3_disable_irqs(struct dwc3_keystone *kdwc)
{
u32 reg;
reg = kdwc3_readl(kdwc->base, KEYSTONE_DWC3_IRQ);
reg &= ~KEYSTONE_DWC3_IRQ_ENABLE;
kdwc3_writel(kdwc->base, KEYSTONE_DWC3_IRQ, reg);
}this will be much more "future-safe".
drivers/usb/dwc3/dwc3-keystone.c line 95
Quoted 12 lines
drivers/usb/dwc3/dwc3-keystone.c new file +12
-0+static int kdwc3_enable (struct dwc3_keystone *kdwc) +{ +int error; +u32 val; + + kdwc->clk =devm_clk_get (kdwc->dev,"usb" ); +if (IS_ERR_OR_NULL (kdwc->clk)) { +dev_err (kdwc->dev,"unable to get kdwc usb clock\n" ); +return -ENODEV ; + } + + val =readl (&kdwc->phy_ctrl->phy_clock);
no PHY registers will ever be accessed from a glue layer ;-) This should all be part of a phy driver (drivers/phy/phy-keystone.c) and dwc3.ko will take care of the rest.
drivers/usb/dwc3/dwc3-keystone.c line 108
Quoted 13 lines
drivers/usb/dwc3/dwc3-keystone.c new file +13
-0+writel (val |PHY_REF_SSP_EN (1 ), &kdwc->phy_ctrl->phy_clock); +udelay (20 ); + + error =clk_prepare_enable (kdwc->clk); +if (error <0 ) { +dev_dbg (kdwc->dev,"unable to enable usb clock, err %d\n" , + error); +writel (val, &kdwc->phy_ctrl->phy_clock); +return error; + } + +/* soft reset usbss */ +writel (1 , &kdwc->usbss->sysconfig);
shoul we access sysconfig registers from drivers ? How about using a reset driver ? (drivers/reset/).
drivers/usb/dwc3/dwc3-keystone.c line 110
Quoted 2 lines
drivers/usb/dwc3/dwc3-keystone.c new file +2
-0+while (readl (&kdwc->usbss->sysconfig) &1 ) + ;
infinite loop ? Never, please add a timeout.
drivers/usb/dwc3/dwc3-keystone.c line 113
Quoted 2 lines
drivers/usb/dwc3/dwc3-keystone.c new file +2
-0+ val =readl (&kdwc->usbss->revision); +dev_info (kdwc->dev,"usbss revision %x\n" , val);
unnecessary dev_info(). You're not even decoding the revision information.
drivers/usb/dwc3/dwc3-keystone.c line 126
Quoted 12 lines
drivers/usb/dwc3/dwc3-keystone.c new file +12
-0+return 0 ; +} + +static void kdwc3_disable (struct dwc3_keystone *kdwc) +{ +u32 val; + +clk_disable_unprepare (kdwc->clk); + + val =readl (&kdwc->phy_ctrl->phy_clock); + val &= ~PHY_REF_SSP_EN (MASK ); +writel (val, &kdwc->phy_ctrl->phy_clock);
should not be done here.
drivers/usb/dwc3/dwc3-keystone.c line 132
Quoted 6 lines
drivers/usb/dwc3/dwc3-keystone.c new file +6
-0+} + +static irqreturn_t dwc3_keystone_interrupt (int irq,void *_kdwc) +{ +struct dwc3_keystone *kdwc = _kdwc; +int irqn = kdwc->irqn;
why ? the irq argument should already be the correct IRQ number, right ?
drivers/usb/dwc3/dwc3-keystone.c line 137
Quoted 4 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+spin_lock (&kdwc->lock); +writel (1 , &kdwc->usbss->irqs[irqn].enable_clr); +writel (1 , &kdwc->usbss->irqs[irqn].status); +writel (1 , &kdwc->usbss->irqs[irqn].enable_set);
no magic constants...
Quoted 8 lines
drivers/usb/dwc3/dwc3-keystone.c new file +8
-0+writel (BIT (irqn), &kdwc->usbss->irq_eoi); +spin_unlock (&kdwc->lock); + +return IRQ_HANDLED ; +} + +static int kdwc3_probe (struct platform_device *pdev) +{
drivers/usb/dwc3/dwc3-keystone.c line 155
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+struct device_node *node = pdev->dev.of_node; +struct device *dev = &pdev->dev; +struct dwc3_keystone *kdwc; +struct resource *res; +int error, irq; + +if (!node) { +dev_err (dev,"device node not found\n" ); +return -EINVAL ; + }
if this will only be used on DT-based boot, node *must* be true. If it's not, we're dealing with a pretty critical bug, in which case we want a Kernel Oops to happen so we catch that bug, please drop this check.
Quoted 9 lines
drivers/usb/dwc3/dwc3-keystone.c new file +9
-0+ + kdwc =devm_kzalloc (dev,sizeof (*kdwc),GFP_KERNEL ); +if (!kdwc) +return -ENOMEM ; + +platform_set_drvdata (pdev, kdwc); + +spin_lock_init (&kdwc->lock); + kdwc->dev = dev;
drivers/usb/dwc3/dwc3-keystone.c line 174
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+ + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) { +dev_err (dev,"missing usbss resource\n" ); +return -EINVAL ; + } + + kdwc->usbss =devm_ioremap_resource (dev, res); +if (IS_ERR (kdwc->usbss)) { +dev_err (dev,"ioremap failed on usbss region\n" );
no need to print anything, devm_ioremap_resource() already prints sensible messages.
drivers/usb/dwc3/dwc3-keystone.c line 180
Quoted 6 lines
drivers/usb/dwc3/dwc3-keystone.c new file +6
-0+return PTR_ERR (kdwc->usbss); + } + +dev_dbg (dev,"usbss control start=%08x size=%d mapped=%08x\n" , + (u32)(res->start), (int )resource_size (res), + (u32)(kdwc->usbss));
this is really unnecessary, if you really want to have it, move it to dev_vdbg().
drivers/usb/dwc3/dwc3-keystone.c line 192
Quoted 11 lines
drivers/usb/dwc3/dwc3-keystone.c new file +11
-0+ res =platform_get_resource (pdev,IORESOURCE_MEM ,1 ); +if (!res) { +dev_err (dev,"missing usb phy resource\n" ); +return -EINVAL ; + } + + kdwc->phy_ctrl =devm_ioremap_resource (dev, res); +if (IS_ERR (kdwc->phy_ctrl)) { +dev_err (dev,"ioremap failed on usb phy region\n" ); +return PTR_ERR (kdwc->phy_ctrl); + }
second resource should be part of the PHY driver. This is even more important considering you're using DT, we don't want to allow broken DTS data to be accepted.
drivers/usb/dwc3/dwc3-keystone.c line 196
Quoted 3 lines
drivers/usb/dwc3/dwc3-keystone.c new file +3
-0+dev_dbg (dev,"phy control start=%08x size=%d mapped=%08x\n" , + (u32)(res->start), (int )resource_size (res), + (u32)(kdwc->phy_ctrl));
unnecessary.
drivers/usb/dwc3/dwc3-keystone.c line 201
Quoted 4 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+ kdwc3_dma_mask =dma_get_mask (dev); + dev->dma_mask = &kdwc3_dma_mask; + + error =kdwc3_enable (kdwc);
I would drop this function and just add your clk_prepare() here, then move clk_enable()/clk_disable() to ->runtime_resume/->runtime_suspend() respectively. Then you could just call pm_runtime_get_sync() when you need to access your registers and pm_runtime_put() when you want to drop the clock reference.
this will even make PM implementation a lot easier for you going forward.
drivers/usb/dwc3/dwc3-keystone.c line 212
Quoted 11 lines
drivers/usb/dwc3/dwc3-keystone.c new file +11
-0+if (error) +return error; + + irq =platform_get_irq (pdev,0 ); +if (irq <0 ) { +dev_err (&pdev->dev,"missing irq\n" ); + goto err_irq; + } + + error =devm_request_irq (dev, irq, dwc3_keystone_interrupt,IRQF_SHARED , +"keystone-dwc3" , kdwc);
dev_name(dev) ?? If you happen to have multiple instances of a dwc3 core, it'll give it better names.
drivers/usb/dwc3/dwc3-keystone.c line 219
Quoted 7 lines
drivers/usb/dwc3/dwc3-keystone.c new file +7
-0+if (error) { +dev_err (dev,"failed to request IRQ #%d --> %d\n" , + irq, error); + goto err_irq; + } + + kdwc->irqn =0 ;
wait, what ? Can you describe how this part works ? Why do you even need this if it's alway zero ?
Quoted 13 lines
drivers/usb/dwc3/dwc3-keystone.c new file +13
-0+kdwc3_enable_irqs (kdwc); + + error =of_platform_populate (node,NULL ,NULL , dev); +if (error) { +dev_err (&pdev->dev,"failed to create dwc3 core\n" ); + goto err_core; + } + +return 0 ; + +err_core: +kdwc3_disable_irqs (kdwc); +err_irq:
drivers/usb/dwc3/dwc3-keystone.c line 243
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+kdwc3_disable (kdwc); + +return error; +} + +static int kdwc3_remove (struct platform_device *pdev) +{ +struct dwc3_keystone *kdwc =platform_get_drvdata (pdev); + +if (kdwc) {
kdwc will never be true, you can drop this check.
Quoted 32 lines
drivers/usb/dwc3/dwc3-keystone.c new file +29
-0+kdwc3_disable_irqs (kdwc); +kdwc3_disable (kdwc); +platform_set_drvdata (pdev,NULL ); + } +return 0 ; +} + +static const struct of_device_id kdwc3_of_match[] = { + { .compatible ="ti,keystone-dwc3" , }, + {}, +}; +MODULE_DEVICE_TABLE (of, kdwc3_of_match); + +static struct platform_driver kdwc3_driver = { + .probe = kdwc3_probe, + .remove = kdwc3_remove, + .driver = { + .name ="keystone-dwc3" , + .owner =THIS_MODULE , + .of_match_table = kdwc3_of_match, + }, +}; + +module_platform_driver (kdwc3_driver); + +MODULE_ALIAS ("platform:keystone-dwc3" ); +MODULE_AUTHOR ("WingMan Kwok <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DESCRIPTION ("DesignWare USB3 KEYSTONE Glue Layer" );Signature · 1 line
1.7.9.5
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131125/355dad57/attachment.sig>
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Quoted 2 lines · Felipe Balbi
Hi,
[...]
Quoted 12 lines
drivers/usb/dwc3/dwc3-keystone.c line 201
Quoted 5 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+ kdwc3_dma_mask =dma_get_mask (dev); + dev->dma_mask = &kdwc3_dma_mask; + + error =kdwc3_enable (kdwc);I would drop this function and just add your
clk_prepare()here, then move clk_enable()/clk_disable() to ->runtime_resume/->runtime_suspend() respectively. Then you could just callpm_runtime_get_sync()when you need to access your registers andpm_runtime_put()when you want to drop the clock reference.
Quoted 3 lines
this will even make PM implementation a lot easier for you going forward.
Just to make the PM runtime part clear, there are few issues with PM core clock layer [1], hence drivers is using clock layer. Its trivial to update the driver though once the issue is sorted out.
Meanwhile driver development continue to be with clock calls.
Regards,
Santosh
[1] https://groups.google.com/forum/#!msg/linux.kernel/w5gFxFsIK-c/jYcnRET_EdAJ
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Quoted 18 lines · Santosh Shilimkar
Quoted 2 lines · Felipe Balbi
Hi,
[...]
Quoted 12 lines
drivers/usb/dwc3/dwc3-keystone.c line 201
Quoted 5 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+ kdwc3_dma_mask =dma_get_mask (dev); + dev->dma_mask = &kdwc3_dma_mask; + + error =kdwc3_enable (kdwc);I would drop this function and just add your
clk_prepare()here, then move clk_enable()/clk_disable() to ->runtime_resume/->runtime_suspend() respectively. Then you could just callpm_runtime_get_sync()when you need to access your registers andpm_runtime_put()when you want to drop the clock reference.
Quoted 8 lines
Quoted 3 lines
this will even make PM implementation a lot easier for you going forward.
Just to make the PM runtime part clear, there are few issues with PM core clock layer [1], hence drivers is using clock layer. Its trivial to update the driver though once the issue is sorted out.
Meanwhile driver development continue to be with clock calls.
I don't mind having those clock calls, just suggested a different placement for them.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131126/d5fef4bc/attachment.sig>
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Quoted 22 lines · Felipe Balbi
Quoted 21 lines · Santosh Shilimkar
Quoted 2 lines · Felipe Balbi
Hi,
[...]
Quoted 15 lines
drivers/usb/dwc3/dwc3-keystone.c line 201
Quoted 5 lines
drivers/usb/dwc3/dwc3-keystone.c new file +4
-0+ kdwc3_dma_mask =dma_get_mask (dev); + dev->dma_mask = &kdwc3_dma_mask; + + error =kdwc3_enable (kdwc);I would drop this function and just add your
clk_prepare()here, then move clk_enable()/clk_disable() to ->runtime_resume/->runtime_suspend() respectively. Then you could just callpm_runtime_get_sync()when you need to access your registers andpm_runtime_put()when you want to drop the clock reference.this will even make PM implementation a lot easier for you going forward.
Quoted 9 lines
Quoted 5 lines
Just to make the PM runtime part clear, there are few issues with PM core clock layer [1], hence drivers is using clock layer. Its trivial to update the driver though once the issue is sorted out.
Meanwhile driver development continue to be with clock calls.
I don't mind having those clock calls, just suggested a different placement for them.
I got that part. Just wanted to clear the runtime PM part.
Regards,
Santosh
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
In reply to WingMan KwokQuoted 13 lines · WingMan Kwok
Add Keystone platform specific glue layer to support USB3 Host mode.
Cc Santosh Shilimkar <[email protected]>Cc Felipe Balbi <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Signed-off-by WingMan Kwok <[email protected]>--- drivers/usb/dwc3/Kconfig | 7 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 272 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 280 insertions(+)create mode 100644
drivers/usb/dwc3/dwc3-keystone.c
<snip>
Quoted 18 lines
drivers/usb/dwc3/dwc3-keystone.c new file +18
-0+ error =of_platform_populate (node,NULL ,NULL , dev); +if (error) { +dev_err (&pdev->dev,"failed to create dwc3 core\n" ); + goto err_core; + } + +return 0 ; + +err_core: +kdwc3_disable_irqs (kdwc); +err_irq: +kdwc3_disable (kdwc); + +return error; +} + +static int kdwc3_remove (struct platform_device *pdev) +{
drivers/usb/dwc3/dwc3-keystone.c line 250
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+struct dwc3_keystone *kdwc =platform_get_drvdata (pdev); + +if (kdwc) { +kdwc3_disable_irqs (kdwc); +kdwc3_disable (kdwc); +platform_set_drvdata (pdev,NULL ); + } +return 0 ; +} +
You need to unregister the child nodes in remove.
Also why can't the dwc3-omap driver be reused, Felipe??
I believe the TI wrapper for Keystone is similar to that of AM437x or OMAP5.
Quoted 22 lines
drivers/usb/dwc3/dwc3-keystone.c new file +22
-0+static const struct of_device_id kdwc3_of_match[] = { + { .compatible ="ti,keystone-dwc3" , }, + {}, +}; +MODULE_DEVICE_TABLE (of, kdwc3_of_match); + +static struct platform_driver kdwc3_driver = { + .probe = kdwc3_probe, + .remove = kdwc3_remove, + .driver = { + .name ="keystone-dwc3" , + .owner =THIS_MODULE , + .of_match_table = kdwc3_of_match, + }, +}; + +module_platform_driver (kdwc3_driver); + +MODULE_ALIAS ("platform:keystone-dwc3" ); +MODULE_AUTHOR ("WingMan Kwok <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DESCRIPTION ("DesignWare USB3 KEYSTONE Glue Layer" );
Signature · 1 line
-George
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Hi,
Quoted 25 lines · George Cherian
Quoted 25 lines
drivers/usb/dwc3/dwc3-keystone.c new file +25
-0+ error =of_platform_populate (node,NULL ,NULL , dev); +if (error) { +dev_err (&pdev->dev,"failed to create dwc3 core\n" ); + goto err_core; + } + +return 0 ; + +err_core: +kdwc3_disable_irqs (kdwc); +err_irq: +kdwc3_disable (kdwc); + +return error; +} + +static int kdwc3_remove (struct platform_device *pdev) +{ +struct dwc3_keystone *kdwc =platform_get_drvdata (pdev); + +if (kdwc) { +kdwc3_disable_irqs (kdwc); +kdwc3_disable (kdwc); +platform_set_drvdata (pdev,NULL ); + }
Quoted 8 lines
drivers/usb/dwc3/dwc3-keystone.c line 117
Quoted 3 lines
drivers/usb/dwc3/dwc3-keystone.c new file +3
-0+return 0 ; +} +You need to unregister the child nodes in remove.
Also why can't the dwc3-omap driver be reused, Felipe??
I believe the TI wrapper for Keystone is similar to that of AM437x or OMAP5.
it is very similar indeed, if it can be easily re-use that glue, I'd rather not add another.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131127/eac509d5/attachment.sig>
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Quoted 37 lines · Felipe Balbi
Hi,
Quoted 25 lines · George Cherian
Quoted 25 lines
drivers/usb/dwc3/dwc3-keystone.c new file +25
-0+ error =of_platform_populate (node,NULL ,NULL , dev); +if (error) { +dev_err (&pdev->dev,"failed to create dwc3 core\n" ); + goto err_core; + } + +return 0 ; + +err_core: +kdwc3_disable_irqs (kdwc); +err_irq: +kdwc3_disable (kdwc); + +return error; +} + +static int kdwc3_remove (struct platform_device *pdev) +{ +struct dwc3_keystone *kdwc =platform_get_drvdata (pdev); + +if (kdwc) { +kdwc3_disable_irqs (kdwc); +kdwc3_disable (kdwc); +platform_set_drvdata (pdev,NULL ); + }Quoted 8 lines
drivers/usb/dwc3/dwc3-keystone.c line 117
Quoted 3 lines
drivers/usb/dwc3/dwc3-keystone.c new file +3
-0+return 0 ; +} +You need to unregister the child nodes in remove.
Also why can't the dwc3-omap driver be reused, Felipe??
I believe the TI wrapper for Keystone is similar to that of AM437x or OMAP5.
Quoted 3 lines
it is very similar indeed, if it can be easily re-use that glue, I'd rather not add another.
Initial idea was actually to use same driver but the integration IP is quite different on Keystone vs OMAP which lead to have a separate glue layer. They look similar but there are differences in terms of phys, interrupts, register space. And also non OTG support, runtime PM vs clock etc for now.
After all the glue is really a very small code describes the integration details thanks to nice abstracted dwc3 core layer. So as discussed over irc, keeping the separate glue is preferred but do let us know if you think otherwise.
Regards,
Santosh
PATCH 1/3 usb: dwc3: Add Keystone specific glue layer
Quoted 38 lines · Santosh Shilimkar
Quoted 37 lines · Felipe Balbi
Hi,
Quoted 33 lines · George Cherian
Quoted 18 lines
drivers/usb/dwc3/dwc3-keystone.c new file +18
-0+ error =of_platform_populate (node,NULL ,NULL , dev); +if (error) { +dev_err (&pdev->dev,"failed to create dwc3 core\n" ); + goto err_core; + } + +return 0 ; + +err_core: +kdwc3_disable_irqs (kdwc); +err_irq: +kdwc3_disable (kdwc); + +return error; +} + +static int kdwc3_remove (struct platform_device *pdev) +{drivers/usb/dwc3/dwc3-keystone.c line 250
Quoted 10 lines
drivers/usb/dwc3/dwc3-keystone.c new file +10
-0+struct dwc3_keystone *kdwc =platform_get_drvdata (pdev); + +if (kdwc) { +kdwc3_disable_irqs (kdwc); +kdwc3_disable (kdwc); +platform_set_drvdata (pdev,NULL ); + } +return 0 ; +} +You need to unregister the child nodes in remove.
Also why can't the dwc3-omap driver be reused, Felipe??
I believe the TI wrapper for Keystone is similar to that of AM437x or OMAP5.
Quoted 8 lines
Quoted 3 lines
it is very similar indeed, if it can be easily re-use that glue, I'd rather not add another.
Initial idea was actually to use same driver but the integration IP is quite different on Keystone vs OMAP which lead to have a separate glue layer. They look similar but there are differences in terms of phys, interrupts, register space. And also non OTG support, runtime PM vs clock etc for now.
All of those can be easily taken care of:
a) PHY -> different phy driver
b) non-OTG -> there's a register on dwc3 which we can use
c) runtime vs clock -> we can add optional clock support on dwc3-omap.c
what *really* prevents us from using the same, is register layout and the fact that on OMAP, nobody wants drivers accessing SYS* registers (a mistake IMO). That would be a lot more difficult to make generic.
BTW, OMAP isn't OTG either, it doesn't support the OTG specification even though it can act in both roles. Same applies for keystone, if I'm reading my docs correctly.
Quoted 4 lines
After all the glue is really a very small code describes the integration details thanks to nice abstracted dwc3 core layer. So as discussed over irc, keeping the separate glue is preferred but do let us know if you think otherwise.
yeah, let's keep it separate. Keystone is, in general, an entire new SoC architecture anyway.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131127/2cf1b300/attachment.sig>
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
In reply to WingMan KwokAdded device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
--- .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++ 2 files changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txt
Documentation/devicetree/bindings/usb/keystone-usb.txt new file +43 -0
@@ -0,0 +1,43 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the device. First pair + is the USB subsystem specific register set. Second pair is the + USB subsystem PHY control register set. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3 at 2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + }; + };
arch/arm/boot/dts/keystone.dtsi +27 -0
@@ -181,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; }; + + usb2_phy: usb2_phy { + compatible = "usb-nop-xceiv"; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + }; + + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3 at 2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + }; + }; }; };
Signature · 1 line
1.7.9.5
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
Hi,
Quoted 68 lines · WingMan Kwok
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>--- .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++ 2 files changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txtDocumentation/devicetree/bindings/usb/keystone-usb.txt new file +43
-0@@ -0,0 +1,43 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the device. First pair + is the USB subsystem specific register set. Second pair is the + USB subsystem PHY control register set. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3 at 2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + }; + };arch/arm/boot/dts/keystone.dtsi +0
-0@@ -181,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
arch/arm/boot/dts/keystone.dtsi line 191
Quoted 10 lines
arch/arm/boot/dts/keystone.dtsi +8
-0clocks = <&clkspi>; }; + + usb2_phy: usb2_phy { + compatible = "usb-nop-xceiv"; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + };
you actually have some phy registers which need to be fiddled with. I'd suggest implementing this the same way phy-am335x.c is implemented. It still reuses most of phy-generic.c, but it has some hooks to implement ->init() and ->shutdown(), which seem to be the only methods you need.
BTW, some preliminary TRM coming my way would be cool, so I can better understand how this HW behaves. A board would also go a long way, so I could test this myself (we are part of the same company anyway).
cheers
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131125/34301f12/attachment.sig>
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
Quoted 11 lines · Felipe Balbi
Hi,
Quoted 8 lines · WingMan Kwok
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>---
[...]
Quoted 4 lines
BTW, some preliminary TRM coming my way would be cool, so I can better understand how this HW behaves. A board would also go a long way, so I could test this myself (we are part of the same company anyway).
TRM documentation is bit different. There is no single TRM which has all the information but different chapters called user guides. For Keystone USB, the user guide isn't ready yet but there is an internal version for which we will send you a link.
Boards are hard to get for now but we can see next year.
Regards,
Santosh
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
Quoted 19 lines · Santosh Shilimkar
Quoted 11 lines · Felipe Balbi
Hi,
Quoted 8 lines · WingMan Kwok
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>---
[...]
Quoted 4 lines
BTW, some preliminary TRM coming my way would be cool, so I can better understand how this HW behaves. A board would also go a long way, so I could test this myself (we are part of the same company anyway).
Quoted 6 lines
TRM documentation is bit different. There is no single TRM which has all the information but different chapters called user guides. For Keystone USB, the user guide isn't ready yet but there is an internal version for which we will send you a link.
Boards are hard to get for now but we can see next year.
fair enough, documentation already helps a lot though.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131125/8c245baf/attachment.sig>
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
In reply to WingMan KwokQuoted 78 lines · WingMan Kwok
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>--- .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++ 2 files changed, 70 insertions(+)create mode 100644
Documentation/devicetree/bindings/usb/keystone-usb.txtDocumentation/devicetree/bindings/usb/keystone-usb.txt new file +43
-0@@ -0,0 +1,43 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the device. First pair + is the USB subsystem specific register set. Second pair is the + USB subsystem PHY control register set. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3 at 2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + }; + };arch/arm/boot/dts/keystone.dtsi +8
-0@@ -181,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; }; + + usb2_phy: usb2_phy { + compatible = "usb-nop-xceiv"; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + };
arch/arm/boot/dts/keystone.dtsi line 201
Quoted 10 lines
arch/arm/boot/dts/keystone.dtsi +10
-0+ + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
You don't have seperate interrrupt for wrapper and core? Is it the same interrupt shared between XHCI,DWC3 and wrapper?
Quoted 11 lines
arch/arm/boot/dts/keystone.dtsi +9
-0+ ranges; + + dwc3 at 2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + }; + }; }; };
Signature · 1 line
-George
PATCH 2/3 ARM: dts: keystone: Add usb devicetree bindings
Quoted 14 lines · George Cherian
Quoted 13 lines · WingMan Kwok
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information.
On Keystone II platforms, we use no-op phy driver.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>--- .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++ 2 files changed, 70 insertions(+)create mode 100644
Documentation/devicetree/bindings/usb/keystone-usb.txt
[...]
Quoted 21 lines
Quoted 21 lines
arch/arm/boot/dts/keystone.dtsi +13
-0@@ -181,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; }; + + usb2_phy: usb2_phy { + compatible = "usb-nop-xceiv"; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + }; + + usb: usb at 2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>;
Quoted 9 lines
arch/arm/boot/dts/keystone.dtsi line 201
Quoted 5 lines
arch/arm/boot/dts/keystone.dtsi +5
-0+ reg = <0x2680000 0x10000 + 0x2620738 32>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;You don't have seperate interrrupt for wrapper and core? Is it the same interrupt shared between XHCI,DWC3 and wrapper?
You don't need actually two seperate interrupts.
DWC3 core actually registers IRQ for XHCI. And in OMAP case, there is one more IRQ in wrapper. After checking with Felipe, it seems the OMAP wrapper interrupt was more for debug purpose than any real use.
On Keystone only one IRQ is used and the handling is managed through IRQF_SHARED and that is also mainly because the IRQ ack needs special write to EOI register unlike OMAP.
Regards,
Santosh
PATCH 3/3 ARM: keystone: defconfig: enable USB host mode support
In reply to WingMan KwokEnable the USB host mode support on TI's Keystone platform. It also enables the support of usb mass storage, FAT and Ext4 filesystems to test rootfs mount over an USB disk.
--- arch/arm/configs/keystone_defconfig | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
arch/arm/configs/keystone_defconfig +19 -1
@@ -115,6 +115,8 @@ CONFIG_MTD_UBI=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y
@@ -129,10 +131,24 @@ CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_DEBUG=y +CONFIG_USB_DWC3_VERBOSE=y +CONFIG_NOP_USB_XCEIV=y CONFIG_DMADEVICES=y CONFIG_COMMON_CLK_DEBUG=y CONFIG_MEMORY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_WBUF_VERIFY=y
@@ -144,6 +160,8 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_SHIRQ=y CONFIG_DEBUG_INFO=y
Signature · 1 line
1.7.9.5
PATCH 3/3 ARM: keystone: defconfig: enable USB host mode support
Hi,
Quoted 6 lines · WingMan Kwok
Enable the USB host mode support on TI's Keystone platform. It also enables the support of usb mass storage, FAT and Ext4 filesystems to test rootfs mount over an USB disk.
Cc Santosh Shilimkar <[email protected]>Signed-off-by WingMan Kwok <[email protected]>
no phy driver anywhere ? How will nop-xceiv ever probe if you don't enable the driver for it ?
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131125/f58f7ddf/attachment-0001.sig>