Skip to contentSkip to conversation

mx6sabre_common: Allow booting a FSL 3.10 kernel

PATCH New Fabio Estevam 4 participants 6 messages Nov 25, 2013 – Nov 26, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

Currently the booting of a 3.10 kernel fails, as explained by Jason Liu [1]:

"Let me explain it:
since we defined the fdt_high=0xffffffff at include/configs/mx6qsabre_common.h, which means we disable the fdt re-allocation, which you can see when boot up:

## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1800e37e

The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel Boot up, it will decompress the compressed kernel image and place the decompressed kernel image at the low end of the DDR memory and start running from it. If the decompressed kernel image is bigger for example than 16M, it may over written the fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000.

o expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override, since we will not likely have one kernel image larger than 128MB.

The other solution is to enable the FDT blob re-allocation by remove the fdt_high=0xffffffff"

Use the second approach to enable the boot of a FSL 3.10 kernel.

[1] http://marc.info/?l=u-boot&m=138519609402384&w=2

---
 include/configs/mx6sabre_common.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/mx6sabre_common.h +0 -2
index 79d1f34..14db1c1 100644
@@ -86,8 +86,6 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
-	"fdt_high=0xffffffff\0"	  \
-	"initrd_high=0xffffffff\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

Quoted 20 lines · Fabio Estevam

Currently the booting of a 3.10 kernel fails, as explained by Jason Liu [1]:

"Let me explain it:
since we defined the fdt_high=0xffffffff at include/configs/mx6qsabre_common.h, which means we disable the fdt re-allocation, which you can see when boot up:

## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1800e37e

The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel Boot up, it will decompress the compressed kernel image and place the decompressed kernel image at the low end of the DDR memory and start running from it. If the decompressed kernel image is bigger for example than 16M, it may over written the fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000.

o expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override, since we will not likely have one kernel image larger than 128MB.

Quoted 8 lines

The other solution is to enable the FDT blob re-allocation by remove the fdt_high=0xffffffff"

Use the second approach to enable the boot of a FSL 3.10 kernel.

[1] http://marc.info/?l=u-boot&m=138519609402384&w=2

My patch changed the load address for the device tree blog, as explained by Liu, it avoids an extra copy which may impact in boot speed.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
#2 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

Quoted 3 lines · Otavio Salvador

My patch changed the load address for the device tree blog, as explained by Liu, it avoids an extra copy which may impact in boot speed.

IMHO we should do a specific Falcon config if we are concerned with boot speed.

I still prefer to remove fdt_high. We don't have fdt_high on mx23evk/mx28evk/mx53loco/mx51evk, etc.

Regards,

Fabio Estevam

#3 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

Quoted 11 lines · Fabio Estevam
Quoted 3 lines · Otavio Salvador

My patch changed the load address for the device tree blog, as explained by Liu, it avoids an extra copy which may impact in boot speed.

IMHO we should do a specific Falcon config if we are concerned with boot speed.

I still prefer to remove fdt_high. We don't have fdt_high on mx23evk/mx28evk/mx53loco/mx51evk, etc.

I will send a single patch for all boards as requested by Stefano. Does it work for you?

Signature · 3 lines
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
#4 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

Quoted 8 lines · Otavio Salvador
Quoted 7 lines · Fabio Estevam
Quoted 3 lines · Otavio Salvador

My patch changed the load address for the device tree blog, as explained by Liu, it avoids an extra copy which may impact in boot speed.

Quoted 7 lines
Quoted 4 lines

IMHO we should do a specific Falcon config if we are concerned with boot speed.

I still prefer to remove fdt_high. We don't have fdt_high on mx23evk/mx28evk/mx53loco/mx51evk, etc.

I will send a single patch for all boards as requested by Stefano. Does it work for you?

I prefer to load dtb into a RAM position that comes prior to the kernel, as we do currently.

I agree that it is not likely we will have a kernel larger than 128MB, but we could have a kernel + ramfs larger than 128MB and the overlap will still happen with your patch.

Regards,

Fabio Estevam

#5 lore raw

PATCH 1/1 mx6sabre_common: Allow booting a FSL 3.10 kernel

In reply to Otavio Salvador

Hi Otavio, hi Fabio,

Quoted 27 lines · Otavio Salvador
Quoted 25 lines · Fabio Estevam

Currently the booting of a 3.10 kernel fails, as explained by Jason Liu [1]:

"Let me explain it:
since we defined the fdt_high=0xffffffff at include/configs/mx6qsabre_common.h, which means we disable the fdt re-allocation, which you can see when boot up:

## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1800e37e

The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel Boot up, it will decompress the compressed kernel image and place the decompressed kernel image at the low end of the DDR memory and start running from it. If the decompressed kernel image is bigger for example than 16M, it may over written the fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000.

o expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override, since we will not likely have one kernel image larger than 128MB.

The other solution is to enable the FDT blob re-allocation by remove the fdt_high=0xffffffff"

Use the second approach to enable the boot of a FSL 3.10 kernel.

Quoted 7 lines
Quoted 3 lines

[1] http://marc.info/?l=u-boot&m=138519609402384&w=2

My patch changed the load address for the device tree blog, as explained by Liu, it avoids an extra copy which may impact in boot speed.

Maybe I am missing something. If I have well understood, the additional copy is for the DT only. That means 20-30 KB, I suppose. Which is the improvement in boot time if we let that the FDT is copied one more time ? Is this time maybe negligible (I suppose yes, but I have no real data) ?

Avoiding the additional copy is a sort of optimization, that anybody, if wanted, can do changing the running environment. The default environment should ensure that the kernel boots in any conditions.

IMHO it is better to remove fdt_addr at all as proposed by Fabio, and let the system doing the job - excepted we can say we have a *real* big improvement dropping the FDT relocation.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================