Skip to contentSkip to conversation

powerpc/p1010rdb:modify the mtest start_address

PATCH New Zhao Qiang 2 participants 2 messages Nov 26, 2013 – Dec 4, 2013

lore
Share & tools
lore

Zhao Qiang

author
#0 lore raw

PATCH 1/1 powerpc/p1010rdb:modify the mtest start_address

In new board P1010RDB-PB, the interrupt vector table is at the start of memory. So if the start_address needs to be set a proper value.

---
 include/configs/P1010RDB.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/P1010RDB.h +1 -1
index c1cfbd4..e0fb4c1 100644
@@ -173,7 +173,7 @@
 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
 #endif
 
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x1fffffff
 #define CONFIG_PANIC_HANG		/* do not reset board on panic */
 
Signature · 1 line
1.8.4
#1 lore raw

PATCH 1/1 powerpc/p1010rdb:modify the mtest start_address

Quoted 6 lines · Zhao Qiang

In new board P1010RDB-PB, the interrupt vector table is at the start of memory. So if the start_address needs to be set a proper value.

---

Applied to u-boot-mpc85xx/master. Thanks.

York