arm: exynos: adds ifdef for spi boot
Subsystems (2)
PATCH 1/1 arm: exynos: adds ifdef for spi boot
This patch fix following errors and warnings
spl_boot.c: In function 'exynos_spi_copy':
spl_boot.c:111:49: error: 'CONFIG_ENV_SPI_BASE' undeclared (first use in this function) spl_boot.c:111:49: note: each undeclared identifier is reported only once for each function it appears in spl_boot.c:142:2: error: 'SPI_FLASH_UBOOT_POS' undeclared (first use in this function) spl_boot.c: In function 'copy_uboot_to_ram':
spl_boot.c:189:28: warning: unused variable 'param' [-Wunused-variable]spl_boot.c: At top level:
spl_boot.c:107:13: warning: 'exynos_spi_copy' defined but not used [-Wunused-function]
--- arch/arm/cpu/armv7/exynos/spl_boot.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/cpu/armv7/exynos/spl_boot.c +4 -0
@@ -62,6 +62,7 @@ static int config_branch_prediction(int set_cr_z) }#endif +#ifdef CONFIG_SPI_BOOTING static void spi_rx_tx (struct exynos_spi *regs,int todo,void *dinp,void const *doutp,int i) {
@@ -174,6 +175,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)clrbits_le32 (®s->ch_cfg,SPI_CH_RST ); clrbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); } +#endif /* * Copy U-boot from mmc to RAM:
@@ -186,7 +188,9 @@ void copy_uboot_to_ram(void)u32 (*copy_bl2)(u32 offset,u32 nblock,u32 dst) =NULL ;u32 offset =0 , size =0 ; +#ifdef CONFIG_SPI_BOOTING struct spl_machine_param *param =spl_get_machine_params (); +#endif #ifdef CONFIG_SUPPORT_EMMC_BOOT u32 (*copy_bl2_from_emmc)(u32 nblock,u32 dst);void (*end_bootop_from_emmc)(void );
Signature · 4 lines
1.7.9.5 -- Thanks, Minkyu Kang.
PATCH 1/1 arm: exynos: adds ifdef for spi boot
Quoted 39 lines · Minkyu Kang
This patch fix following errors and warnings
spl_boot.c: In function 'exynos_spi_copy':
spl_boot.c:111:49: error: 'CONFIG_ENV_SPI_BASE' undeclared (first use in this function) spl_boot.c:111:49: note: each undeclared identifier is reported only once for each function it appears in spl_boot.c:142:2: error: 'SPI_FLASH_UBOOT_POS' undeclared (first use in this function)spl_boot.c: In function 'copy_uboot_to_ram':
spl_boot.c:189:28: warning: unused variable 'param' [-Wunused-variable]spl_boot.c: At top level:
spl_boot.c:107:13: warning: 'exynos_spi_copy' defined but not used [-Wunused-function]Signed-off-by Minkyu Kang <[email protected]>Cc Albert ARIBAUD <[email protected]>--- arch/arm/cpu/armv7/exynos/spl_boot.c | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/cpu/armv7/exynos/spl_boot.c +2
-0@@ -62,6 +62,7 @@ static int config_branch_prediction(int set_cr_z) }#endif +#ifdef CONFIG_SPI_BOOTING static void spi_rx_tx (struct exynos_spi *regs,int todo,void *dinp,void const *doutp,int i) {@@ -174,6 +175,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)clrbits_le32 (®s->ch_cfg,SPI_CH_RST ); clrbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); } +#endif /* * Copy U-boot from mmc to RAM:
arch/arm/cpu/armv7/exynos/spl_boot.c void copy_uboot_to_ram(void) · line 196
Quoted 9 lines
arch/arm/cpu/armv7/exynos/spl_boot.c +2
-0@@ -186,7 +188,9 @@ void copy_uboot_to_ram(void)u32 (*copy_bl2)(u32 offset,u32 nblock,u32 dst) =NULL ;u32 offset =0 , size =0 ; +#ifdef CONFIG_SPI_BOOTING struct spl_machine_param *param =spl_get_machine_params (); +#endif #ifdef CONFIG_SUPPORT_EMMC_BOOT u32 (*copy_bl2_from_emmc)(u32 nblock,u32 dst);void (*end_bootop_from_emmc)(void );
applied to u-boot-samsung.
Thanks,
Minkyu Kang.