ARM: SAMSUNG: remove IRQF_DISABLED
Subsystems (3)
A message that is not in the archive (sent off-list or not yet received): 000801cec874$%[email protected]
PATCH RESEND 1/1 ARM: SAMSUNG: remove IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by Michael Opdenacker <[email protected]>
Reviewed-by Jingoo Han <[email protected]>
--- arch/arm/mach-s3c24xx/dma.c | 2 +- arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-)
arch/arm/mach-s3c24xx/dma.c +1 -1
@@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->irq_claimed =1 ;local_irq_restore (flags); - err =request_irq (chan->irq, s3c2410_dma_irq,IRQF_DISABLED , + err =request_irq (chan->irq, s3c2410_dma_irq,0 , client->name, (void *)chan);local_irq_save (flags);
arch/arm/mach-s3c24xx/simtec-usb.c +1 -2
@@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)if (on) { ret =request_irq (BAST_IRQ_USBOC , usb_simtec_ocirq, -IRQF_DISABLED |IRQF_TRIGGER_RISING | -IRQF_TRIGGER_FALLING , +IRQF_TRIGGER_RISING |IRQF_TRIGGER_FALLING ,"USB Over-current" , info);if (ret !=0 ) {printk (KERN_ERR "failed to request usb oc irq\n" );
arch/arm/mach-s3c64xx/mach-smartq.c +1 -1
@@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)if (on) { ret =request_irq (gpio_to_irq (S3C64XX_GPL (10 )), - smartq_usb_host_ocirq,IRQF_DISABLED | + smartq_usb_host_ocirq,IRQF_TRIGGER_RISING |IRQF_TRIGGER_FALLING ,"USB host overcurrent" , info);if (ret !=0 )
Signature · 1 line
1.8.3.2
Quoted 44 lines · Michael Opdenacker
This patch proposes to remove the use of the
IRQF_DISABLEDflagIt's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by Michael Opdenacker<[email protected]>Reviewed-by Jingoo Han<[email protected]>--- arch/arm/mach-s3c24xx/dma.c | 2 +- arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-)arch/arm/mach-s3c24xx/dma.c +1
-1@@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->irq_claimed =1 ;local_irq_restore (flags); - err =request_irq (chan->irq, s3c2410_dma_irq,IRQF_DISABLED , + err =request_irq (chan->irq, s3c2410_dma_irq,0 , client->name, (void *)chan);local_irq_save (flags);arch/arm/mach-s3c24xx/simtec-usb.c +1
-2@@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)if (on) { ret =request_irq (BAST_IRQ_USBOC , usb_simtec_ocirq, -IRQF_DISABLED |IRQF_TRIGGER_RISING | -IRQF_TRIGGER_FALLING , +IRQF_TRIGGER_RISING |IRQF_TRIGGER_FALLING ,"USB Over-current" , info);if (ret !=0 ) {printk (KERN_ERR "failed to request usb oc irq\n" );arch/arm/mach-s3c64xx/mach-smartq.c +0
-0
arch/arm/mach-s3c64xx/mach-smartq.c static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) · line 112
Quoted 8 lines
arch/arm/mach-s3c64xx/mach-smartq.c +1
-1@@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)if (on) { ret =request_irq (gpio_to_irq (S3C64XX_GPL (10 )), - smartq_usb_host_ocirq,IRQF_DISABLED | + smartq_usb_host_ocirq,IRQF_TRIGGER_RISING |IRQF_TRIGGER_FALLING ,"USB host overcurrent" , info);if (ret !=0 )
Looks OK to me, applied.
Thanks,
Kukjin