bootm: Reinstate special case for standalone images
PATCH 1/1 bootm: Reinstate special case for standalone images
For standalone images, bootm had a special case where the OS boot function was NULL but did actually exist. It was just called manually.
This was removed by commit 35fc84fa which checks for the non-existence of this function before the special case is examined.
There is no obvious reason why standalone is handled with a special case. Adjust the code so that standalone has a normal OS boot function. We still need a special case for when the function returns, but at least we can avoid the main problem.
This is intended to fix the reported:
ERROR: booting os 'U-Boot' (17) is not supported
but needs testing.
---
common/cmd_bootm.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
common/cmd_bootm.c +12 -9
@@ -77,6 +77,9 @@ static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);static void fixup_silent_linux (void );#endif +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images); +static const void *boot_get_kernel (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[],bootm_headers_t *images,ulong *os_data,ulong *os_len);
@@ -131,6 +134,7 @@ static boot_os_fn do_bootm_integrity;#endif static boot_os_fn *boot_os[] = { + [IH_TYPE_STANDALONE ] = do_bootm_standalone, #ifdef CONFIG_BOOTM_LINUX [IH_OS_LINUX ] = do_bootm_linux, #endif
@@ -487,17 +491,18 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,return 0 ; } -static int bootm_start_standalone (int argc,char *const argv[]) +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images) {char *s;int (*appl)(int ,char *const []);/* Don't start if "autostart" is set to "no" */ if (((s =getenv ("autostart" )) !=NULL ) && (strcmp (s,"no" ) ==0 )) { -setenv_hex ("filesize" , images.os.image_len); +setenv_hex ("filesize" , images->os.image_len);return 0 ; } - appl = (int (*)(int ,char *const []))(ulong )ntohl (images.ep); + appl = (int (*)(int ,char *const []))(ulong )ntohl (images->ep); (*appl)(argc, argv);return 0 ; }
@@ -523,14 +528,12 @@ static cmd_tbl_t cmd_bootm_sub[] = {static int boot_selected_os (int argc,char *const argv[],int state,bootm_headers_t *images,boot_os_fn *boot_fn) { -if (images->os.type ==IH_TYPE_STANDALONE ) { -/* This may return when 'autostart' is 'no' */ -bootm_start_standalone (argc, argv); -return 0 ; - }arch_preboot_os ();boot_fn (state, argc, argv, images); -if (state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ + +/* Stand-alone may return when 'autostart' is 'no' */ +if (images->os.type ==IH_TYPE_STANDALONE || + state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ return 0 ;bootstage_error (BOOTSTAGE_ID_BOOT_OS_RETURNED );#ifdef DEBUG
Signature · 1 line
1.8.5.1
PATCH 1/1 bootm: Reinstate special case for standalone images
Quoted 38 lines · Simon Glass
For standalone images, bootm had a special case where the OS boot function was NULL but did actually exist. It was just called manually.
This was removed by commit
35fc84fawhich checks for the non-existence of this function before the special case is examined.There is no obvious reason why standalone is handled with a special case. Adjust the code so that standalone has a normal OS boot function. We still need a special case for when the function returns, but at least we can avoid the main problem.
This is intended to fix the reported:
ERROR: booting os 'U-Boot' (17) is not supported
but needs testing.
Signed-off-by Simon Glass <[email protected]>---
common/cmd_bootm.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)common/cmd_bootm.c +3
-0@@ -77,6 +77,9 @@ static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);static void fixup_silent_linux (void );#endif +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images); +static const void *boot_get_kernel (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[],bootm_headers_t *images,ulong *os_data,ulong *os_len);
common/cmd_bootm.c static boot_os_fn do_bootm_integrity; · line 137
Quoted 4 lines
common/cmd_bootm.c +1
-0@@ -131,6 +134,7 @@ static boot_os_fn do_bootm_integrity;#endif static boot_os_fn *boot_os[] = { + [IH_TYPE_STANDALONE ] = do_bootm_standalone,
This should be IH_OS_U_BOOT
Quoted 34 lines
common/cmd_bootm.c +4
-8#ifdef CONFIG_BOOTM_LINUX [IH_OS_LINUX] = do_bootm_linux,#endif @@ -487,17 +491,18 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,return 0 ; } -static int bootm_start_standalone (int argc,char *const argv[]) +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images) {char *s;int (*appl)(int ,char *const []);/* Don't start if "autostart" is set to "no" */ if (((s =getenv ("autostart" )) !=NULL ) && (strcmp (s,"no" ) ==0 )) { -setenv_hex ("filesize" , images.os.image_len); +setenv_hex ("filesize" , images->os.image_len);return 0 ; } - appl = (int (*)(int ,char *const []))(ulong )ntohl (images.ep); + appl = (int (*)(int ,char *const []))(ulong )ntohl (images->ep); (*appl)(argc, argv);return 0 ; }@@ -523,14 +528,12 @@ static cmd_tbl_t cmd_bootm_sub[] = {static int boot_selected_os (int argc,char *const argv[],int state,bootm_headers_t *images,boot_os_fn *boot_fn) { -if (images->os.type ==IH_TYPE_STANDALONE ) { -/* This may return when 'autostart' is 'no' */ -bootm_start_standalone (argc, argv); -return 0 ; - }
common/cmd_bootm.c static cmd_tbl_t cmd_bootm_sub[] = { · line 539
Quoted 10 lines
common/cmd_bootm.c +4
-1arch_preboot_os ();boot_fn (state, argc, argv, images); -if (state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ + +/* Stand-alone may return when 'autostart' is 'no' */ +if (images->os.type ==IH_TYPE_STANDALONE || + state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ return 0 ;bootstage_error (BOOTSTAGE_ID_BOOT_OS_RETURNED );#ifdef DEBUG
But anyway I have tested this in zynq.
Image generation by this command
./tools/mkimage -n "hello" -A arm -O u-boot -T standalone -C none -a c100000 -d examples/standalone/hello_world.bin -v /tftpboot/hello.ub
on 2013.04 is behaviour
U-Boot> bootm
## Booting kernel from Legacy Image at 00001000 ...
Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 Bytes
Load Address: 0c100000
Entry Point: 0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
OK
Example expects ABI version 6
Actual U-Boot ABI version 6
Hello World
argc = 0
data abort
MAYBE you should read doc/README.arm-unaligned-accesses
pc : [<3ffd8e74>] lr : [<3ffd9574>]
sp : 3fbadc20 ip : 00000043 fp : 3ffea2c4
r10: ffffffff r9 : 3fbaddd4 r8 : 3fbadf40
r7 : 0c100232 r6 : ea000014 r5 : ffffffff r4 : 3fbadcaf
r3 : ea000014 r2 : ea000014 r1 : ea000013 r0 : ea000014
Flags: nzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
on the latest&greatest with fix above
U-Boot 2013.10-00793-gc9ca75a-dirty (Dec 10 2013 - 06:30:03)
I2C: ready Memory: ECC disabled DRAM: 1 GiB MMC: zynq_sdhci: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: Gem.e000b000 Hit any key to stop autoboot: 0
zynq-uboot> set serverip 192.168.0.100
zynq-uboot> set ipaddr 192.168.0.10
zynq-uboot> tftp 1000 hello.ub
Gem.e000b000 Waiting for PHY auto negotiation to complete.... done Using Gem.e000b000 device
TFTP from server 192.168.0.100; our IP address is 192.168.0.10 Filename 'hello.ub'.
Load address: 0x1000
Loading: #
642.6 KiB/s
done
Bytes transferred = 658 (292 hex) zynq-uboot> bootm
## Booting kernel from Legacy Image at 00001000 ...
Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 Bytes
Load Address: 0c100000
Entry Point: 0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
software interrupt
pc : [<0000101c>] lr : [<0000101c>]
sp : 3fb51d78 ip : 00000000 fp : 00001000
r10: 3ffae998 r9 : 3ffae998 r8 : 3fb51f40
r7 : 00000000 r6 : 00000000 r5 : 3fb527b4 r4 : 3ffae998
r3 : 0000100c r2 : 00000003 r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
It means there is at least problem on arm even with this patch. Will be great if someone can confirm on any arm platform if this is working or not. Just to be sure that it is not zynq specific problem.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131210/597d0936/attachment.pgp>
PATCH 1/1 bootm: Reinstate special case for standalone images
Quoted 174 lines · Michal Simek
Quoted 38 lines · Simon Glass
For standalone images, bootm had a special case where the OS boot function was NULL but did actually exist. It was just called manually.
This was removed by commit
35fc84fawhich checks for the non-existence of this function before the special case is examined.There is no obvious reason why standalone is handled with a special case. Adjust the code so that standalone has a normal OS boot function. We still need a special case for when the function returns, but at least we can avoid the main problem.
This is intended to fix the reported:
ERROR: booting os 'U-Boot' (17) is not supported
but needs testing.
Signed-off-by Simon Glass <[email protected]>---
common/cmd_bootm.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)common/cmd_bootm.c +3
-0@@ -77,6 +77,9 @@ static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);static void fixup_silent_linux (void );#endif +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images); +static const void *boot_get_kernel (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[],bootm_headers_t *images,ulong *os_data,ulong *os_len);common/cmd_bootm.c static boot_os_fn do_bootm_integrity; · line 137
Quoted 4 lines
common/cmd_bootm.c +1
-0@@ -131,6 +134,7 @@ static boot_os_fn do_bootm_integrity;#endif static boot_os_fn *boot_os[] = { + [IH_TYPE_STANDALONE ] = do_bootm_standalone,This should be
IH_OS_U_BOOTQuoted 34 lines
common/cmd_bootm.c +4
-8#ifdef CONFIG_BOOTM_LINUX [IH_OS_LINUX] = do_bootm_linux,#endif @@ -487,17 +491,18 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,return 0 ; } -static int bootm_start_standalone (int argc,char *const argv[]) +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images) {char *s;int (*appl)(int ,char *const []);/* Don't start if "autostart" is set to "no" */ if (((s =getenv ("autostart" )) !=NULL ) && (strcmp (s,"no" ) ==0 )) { -setenv_hex ("filesize" , images.os.image_len); +setenv_hex ("filesize" , images->os.image_len);return 0 ; } - appl = (int (*)(int ,char *const []))(ulong )ntohl (images.ep); + appl = (int (*)(int ,char *const []))(ulong )ntohl (images->ep); (*appl)(argc, argv);return 0 ; }@@ -523,14 +528,12 @@ static cmd_tbl_t cmd_bootm_sub[] = {static int boot_selected_os (int argc,char *const argv[],int state,bootm_headers_t *images,boot_os_fn *boot_fn) { -if (images->os.type ==IH_TYPE_STANDALONE ) { -/* This may return when 'autostart' is 'no' */ -bootm_start_standalone (argc, argv); -return 0 ; - }common/cmd_bootm.c static cmd_tbl_t cmd_bootm_sub[] = { · line 539
Quoted 10 lines
common/cmd_bootm.c +4
-1arch_preboot_os ();boot_fn (state, argc, argv, images); -if (state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ + +/* Stand-alone may return when 'autostart' is 'no' */ +if (images->os.type ==IH_TYPE_STANDALONE || + state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ return 0 ;bootstage_error (BOOTSTAGE_ID_BOOT_OS_RETURNED );#ifdef DEBUG But anyway I have tested this in zynq.
Image generation by this command
./tools/mkimage-n "hello" -A arm -O u-boot -T standalone -C none -a c100000 -d examples/standalone/hello_world.bin -v /tftpboot/hello.ubon 2013.04 is behaviour
U-Boot> bootm
## Booting kernel from Legacy Image at 00001000 ...Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 BytesLoad Address:
0c100000
Entry Point:0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
OK
Example expects ABI version 6
Actual U-Boot ABI version 6
Hello World
argc = 0
data abortMAYBE you should read doc/README.arm-unaligned-accesses
pc : [<3ffd8e74>] lr : [<3ffd9574>]sp :
3fbadc20ip : 00000043 fp :3ffea2c4
r10: ffffffff r9 :3fbaddd4r8 :3fbadf40
r7 :0c100232r6 :ea000014r5 : ffffffff r4 :3fbadcaf
r3 :ea000014r2 :ea000014r1 :ea000013r0 :ea000014
Flags: nzCv IRQs off FIQs off ModeSVC_32
Resetting CPU ...resetting ...
on the latest&greatest with fix above
U-Boot 2013.10-00793-gc9ca75a-dirty (Dec 10 2013 - 06:30:03)
I2C: ready Memory: ECC disabled DRAM: 1 GiB MMC: zynq_sdhci: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 4 KiB, total 16 MiB*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: Gem.e000b000 Hit any key to stop autoboot: 0zynq-uboot> set serverip 192.168.0.100
zynq-uboot> set ipaddr 192.168.0.10
zynq-uboot> tftp 1000 hello.ub
Gem.e000b000 Waiting for PHY auto negotiation to complete.... done Using Gem.e000b000 device
TFTP from server 192.168.0.100; our IP address is 192.168.0.10 Filename 'hello.ub'.
Load address:0x1000
Loading: #642.6 KiB/sdone
Bytes transferred = 658 (292 hex) zynq-uboot> bootm
## Booting kernel from Legacy Image at 00001000 ...Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 BytesLoad Address:
0c100000
Entry Point:0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
software interruptpc : [<0000101c>] lr : [<0000101c>]sp :
3fb51d78ip : 00000000 fp : 00001000
r10:3ffae998r9 :3ffae998r8 :3fb51f40
r7 : 00000000 r6 : 00000000 r5 :3fb527b4r4 :3ffae998
r3 :0000100cr2 : 00000003 r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs off FIQs off ModeSVC_32
Resetting CPU ...
Quoted 7 lines
resetting ...
It means there is at least problem on arm even with this patch. Will be great if someone can confirm on any arm platform if this is working or not. Just to be sure that it is not zynq specific problem.
Since patchwork is down I can't send a link to it, but Jeroen posted a patch that fixes examples/standalone/stubs.c to use r9 instead of r8 on lines 43 and 50. I think that's the next thing you need here.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131210/0c5cc092/attachment.pgp>
PATCH 1/1 bootm: Reinstate special case for standalone images
Hi,
Quoted 178 lines · Tom Rini
Quoted 177 lines · Michal Simek
Quoted 38 lines · Simon Glass
For standalone images, bootm had a special case where the OS boot function was NULL but did actually exist. It was just called manually.
This was removed by commit
35fc84fawhich checks for the non-existence of this function before the special case is examined.There is no obvious reason why standalone is handled with a special case. Adjust the code so that standalone has a normal OS boot function. We still need a special case for when the function returns, but at least we can avoid the main problem.
This is intended to fix the reported:
ERROR: booting os 'U-Boot' (17) is not supported
but needs testing.
Signed-off-by Simon Glass <[email protected]>---
common/cmd_bootm.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)common/cmd_bootm.c +3
-0@@ -77,6 +77,9 @@ static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);static void fixup_silent_linux (void );#endif +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images); +static const void *boot_get_kernel (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[],bootm_headers_t *images,ulong *os_data,ulong *os_len);common/cmd_bootm.c static boot_os_fn do_bootm_integrity; · line 137
Quoted 4 lines
common/cmd_bootm.c +1
-0@@ -131,6 +134,7 @@ static boot_os_fn do_bootm_integrity;#endif static boot_os_fn *boot_os[] = { + [IH_TYPE_STANDALONE ] = do_bootm_standalone,This should be
IH_OS_U_BOOTQuoted 34 lines
common/cmd_bootm.c +4
-8#ifdef CONFIG_BOOTM_LINUX [IH_OS_LINUX] = do_bootm_linux,#endif @@ -487,17 +491,18 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,return 0 ; } -static int bootm_start_standalone (int argc,char *const argv[]) +static int do_bootm_standalone (int flag,int argc,char *const argv[], +bootm_headers_t *images) {char *s;int (*appl)(int ,char *const []);/* Don't start if "autostart" is set to "no" */ if (((s =getenv ("autostart" )) !=NULL ) && (strcmp (s,"no" ) ==0 )) { -setenv_hex ("filesize" , images.os.image_len); +setenv_hex ("filesize" , images->os.image_len);return 0 ; } - appl = (int (*)(int ,char *const []))(ulong )ntohl (images.ep); + appl = (int (*)(int ,char *const []))(ulong )ntohl (images->ep); (*appl)(argc, argv);return 0 ; }@@ -523,14 +528,12 @@ static cmd_tbl_t cmd_bootm_sub[] = {static int boot_selected_os (int argc,char *const argv[],int state,bootm_headers_t *images,boot_os_fn *boot_fn) { -if (images->os.type ==IH_TYPE_STANDALONE ) { -/* This may return when 'autostart' is 'no' */ -bootm_start_standalone (argc, argv); -return 0 ; - }common/cmd_bootm.c static cmd_tbl_t cmd_bootm_sub[] = { · line 539
Quoted 10 lines
common/cmd_bootm.c +4
-1arch_preboot_os ();boot_fn (state, argc, argv, images); -if (state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ + +/* Stand-alone may return when 'autostart' is 'no' */ +if (images->os.type ==IH_TYPE_STANDALONE || + state ==BOOTM_STATE_OS_FAKE_GO )/* We expect to return */ return 0 ;bootstage_error (BOOTSTAGE_ID_BOOT_OS_RETURNED );#ifdef DEBUG But anyway I have tested this in zynq.
Image generation by this command
./tools/mkimage-n "hello" -A arm -O u-boot -T standalone -C none -a c100000 -d examples/standalone/hello_world.bin -v /tftpboot/hello.ubon 2013.04 is behaviour
U-Boot> bootm
## Booting kernel from Legacy Image at 00001000 ...Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 BytesLoad Address:
0c100000
Entry Point:0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
OK
Example expects ABI version 6
Actual U-Boot ABI version 6
Hello World
argc = 0
data abortMAYBE you should read doc/README.arm-unaligned-accesses
pc : [<3ffd8e74>] lr : [<3ffd9574>]sp :
3fbadc20ip : 00000043 fp :3ffea2c4
r10: ffffffff r9 :3fbaddd4r8 :3fbadf40
r7 :0c100232r6 :ea000014r5 : ffffffff r4 :3fbadcaf
r3 :ea000014r2 :ea000014r1 :ea000013r0 :ea000014
Flags: nzCv IRQs off FIQs off ModeSVC_32
Resetting CPU ...resetting ...
on the latest&greatest with fix above
U-Boot 2013.10-00793-gc9ca75a-dirty (Dec 10 2013 - 06:30:03)
I2C: ready Memory: ECC disabled DRAM: 1 GiB MMC: zynq_sdhci: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 4 KiB, total 16 MiB*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: Gem.e000b000 Hit any key to stop autoboot: 0zynq-uboot> set serverip 192.168.0.100
zynq-uboot> set ipaddr 192.168.0.10
zynq-uboot> tftp 1000 hello.ub
Gem.e000b000 Waiting for PHY auto negotiation to complete.... done Using Gem.e000b000 device
TFTP from server 192.168.0.100; our IP address is 192.168.0.10 Filename 'hello.ub'.
Load address:0x1000
Loading: #642.6 KiB/sdone
Bytes transferred = 658 (292 hex) zynq-uboot> bootm
## Booting kernel from Legacy Image at 00001000 ...Image Name: hello Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 BytesLoad Address:
0c100000
Entry Point:0c100000
Verifying Checksum ... OK
Loading Standalone Program ... OK
software interruptpc : [<0000101c>] lr : [<0000101c>]sp :
3fb51d78ip : 00000000 fp : 00001000
r10:3ffae998r9 :3ffae998r8 :3fb51f40
r7 : 00000000 r6 : 00000000 r5 :3fb527b4r4 :3ffae998
r3 :0000100cr2 : 00000003 r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs off FIQs off ModeSVC_32
Resetting CPU ...resetting ...
Quoted 8 lines
Quoted 4 lines
It means there is at least problem on arm even with this patch. Will be great if someone can confirm on any arm platform if this is working or not. Just to be sure that it is not zynq specific problem.
Since patchwork is down I can't send a link to it, but Jeroen posted a patch that fixes
examples/standalone/stubs.cto use r9 instead of r8 on lines 43 and 50. I think that's the next thing you need here.
Thanks Tom. That patch is now in the ARM tree, and I have just sent v2 of this patch.
Regards,
Simon