uhci_hcd: Possible corruption of DMA pool uhci->td_pool
Hi,
On ROSA Linux with kernel 3.10.21 with DMA debug options enabled, the kernel sometimes issues a warning about DMA pool corruption (see the log below).
That happens sometimes, when the system boots or resumes from hibernation with Samson C01U USB microphone attached.
The affected DMA pool is 'uhci->td_pool', uhci_alloc_td() from drivers/usb/host/uhci-hcd.c makes the relevant dma_pool_alloc() calls.
Any ideas about how to find what causes this and how to fix it?
Here is the relevant part of the system log:
----------------------------
[ 22.264332] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 22.450609] usb 2-1: New USB device found, idVendor=17a0, idProduct=0001 [ 22.450626] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.450639] usb 2-1: Product: Samson C01U [ 22.450649] usb 2-1: Manufacturer: Samson Technologies <...> [ 280.703483] retire_capture_urb: 4494 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b060 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] retire_capture_urb: 4343 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b5d0 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27)
----------------------------
0xa7 is POOL_POISON_FREED. The memory pages to be allocated from the pool should be filled with such bytes.
Each time I observed this problem, the first 8 bytes of the listed memory area were overwritten, with different data each time.
Regards,
Eugene
Signature · 2 lines
Eugene Shatokhin, ROSA Laboratory. www.rosalab.com
Quoted 6 lines · Eugene Shatokhin
Hi,
On ROSA Linux with kernel 3.10.21 with DMA debug options enabled, the kernel sometimes issues a warning about DMA pool corruption (see the log below).
Quoted 7 lines
That happens sometimes, when the system boots or resumes from hibernation with Samson C01U USB microphone attached.
The affected DMA pool is '
uhci->td_pool',uhci_alloc_td()fromdrivers/usb/host/uhci-hcd.cmakes the relevantdma_pool_alloc()calls.Any ideas about how to find what causes this and how to fix it?
This is not an easy sort of thing to track down...
Quoted 35 lines
Here is the relevant part of the system log:
----------------------------[ 22.264332] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 22.450609] usb 2-1: New USB device found, idVendor=17a0, idProduct=0001 [ 22.450626] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.450639] usb 2-1: Product: Samson C01U [ 22.450649] usb 2-1: Manufacturer: Samson Technologies <...> [ 280.703483] retire_capture_urb: 4494 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b060 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] retire_capture_urb: 4343 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b5d0 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27)
Quoted 7 lines
----------------------------
0xa7isPOOL_POISON_FREED. The memory pages to be allocated from the pool should be filled with such bytes.Each time I observed this problem, the first 8 bytes of the listed memory area were overwritten, with different data each time.
It kind of looks like a hardware bug. Still, it's hard to say.
Can you test the current 3.13-rc kernel? There have been a few recent changes in this area that might have an effect.
Alan Stern
Quoted 58 lines · Alan Stern
Quoted 6 lines · Eugene Shatokhin
Hi,
On ROSA Linux with kernel 3.10.21 with DMA debug options enabled, the kernel sometimes issues a warning about DMA pool corruption (see the log below).
Quoted 7 lines
That happens sometimes, when the system boots or resumes from hibernation with Samson C01U USB microphone attached.
The affected DMA pool is '
uhci->td_pool',uhci_alloc_td()fromdrivers/usb/host/uhci-hcd.cmakes the relevantdma_pool_alloc()calls.Any ideas about how to find what causes this and how to fix it?
This is not an easy sort of thing to track down...
Quoted 40 lines
Here is the relevant part of the system log:
----------------------------[ 22.264332] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 22.450609] usb 2-1: New USB device found, idVendor=17a0, idProduct=0001 [ 22.450626] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.450639] usb 2-1: Product: Samson C01U [ 22.450649] usb 2-1: Manufacturer: Samson Technologies <...> [ 280.703483] retire_capture_urb: 4494 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b060 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] retire_capture_urb: 4343 callbacks suppressed [ 284.961087] uhci_hcd 0000:00:1d.1: dma_pool_alloc uhci_td, efb7b5d0 (corruped) [ 284.961087] 00000000: 00 06 00 00 af 00 00 03 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000010: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] 00000020: a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 a7 ................ [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27) [ 284.961087] cannot submit urb (err = -27)----------------------------
0xa7isPOOL_POISON_FREED. The memory pages to be allocated from the pool should be filled with such bytes.
Quoted 8 lines
Quoted 2 lines
Each time I observed this problem, the first 8 bytes of the listed memory area were overwritten, with different data each time.
It kind of looks like a hardware bug. Still, it's hard to say.
Can you test the current 3.13-rc kernel? There have been a few recent changes in this area that might have an effect.
I tested 3.13-rc3 - the problem has not shown up so far.
Regards,
Eugene
Signature · 2 lines
Eugene Shatokhin, ROSA Laboratory. www.rosalab.com