ARM: tegra: enable ams AS3722 drivers
Subsystems (3)
PATCH 1/2 ARM: tegra: enable ams AS3722 drivers
ams AS3722 is the system power manager module IC for the Tegra124 based Venice2 platform. Enable configs for gpio, pincontrol, rtc, regulator support from this device.
--- arch/arm/configs/tegra_defconfig | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
arch/arm/configs/tegra_defconfig +4 -0
@@ -137,6 +137,7 @@ CONFIG_SPI=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X_IRQ=y
@@ -149,6 +150,7 @@ CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y +CONFIG_MFD_AS3722=y CONFIG_MFD_MAX8907=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y
@@ -157,6 +159,7 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y
@@ -218,6 +221,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y
Signature · 1 line
1.7.1.1
PATCH 2/2 ARM: tegra: add ams AS3722 device to Venice2 DT
Add ams AS3722 entry for gpio/pincontrol and regulators to venice2 DT.
---
This patch is on top of the patch for pincontrol for venice2. Tested with all regulator and sub driver registartion on Venice2.
arch/arm/boot/dts/tegra124-venice2.dts | 285 +++++++++++++++++++++++++++++++- 1 files changed, 284 insertions(+), 1 deletions(-)
arch/arm/boot/dts/tegra124-venice2.dts +284 -1
@@ -350,6 +350,28 @@ nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + dap3_dout_pp2 { + nvidia,pins = "dap2_dout_pp2"; + nvidia,function = "rsvd4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
@@ -419,7 +441,190 @@ i2c at 7000d000 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; + + as3722: as3722 at 40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_ac_bat_reg>; + vsup-sd3-supply = <&vdd_ac_bat_reg>; + vsup-sd4-supply = <&vdd_ac_bat_reg>; + vsup-sd5-supply = <&vdd_ac_bat_reg>; + vin-ldo0-supply = <&as3722_sd2>; + vin-ldo1-6-supply = <&vdd_3v3_reg>; + vin-ldo2-5-7-supply = <&as3722_sd5>; + vin-ldo3-4-supply = <&vdd_ac_bat_reg>; + vin-ldo9-10-supply = <&vdd_ac_bat_reg>; + vin-ldo11-supply = <&vdd_3v3_reg>; + + sd0 { + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + sd1 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + as3722_sd2: sd2 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-pex-sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + }; + + as3722_sd5: sd5 { + regulator-name = "vddio-sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "vdd-gpu"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1 { + regulator-name = "run-cam-1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "gen-avdd,vddio-hsic"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "vdd-cam"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd-cam-front"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7 { + regulator-name = "vdd-cam-rear"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "vdd-touch"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "vdd-cam-af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; }; pmc at 7000e400 {
@@ -464,6 +669,84 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator at 0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator at 1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + }; + + vdd_3v3_modem_reg: regulator at 2 { + compatible = "regulator-fixed"; + regulator-name = "vdd-modem-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_hdmi_5v0_reg: regulator at 3 { + compatible = "regulator-fixed"; + regulator-name = "vdd-hdmi-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + }; + + vdd_bl_reg: regulator at 4 { + compatible = "regulator-fixed"; + regulator-name = "vdd-bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>; + }; + + usb_vbus_hs_reg: regulator at 5 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus_hs"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + usb_vbus_ss_reg: regulator at 6 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus_ss"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + panel_3v3_reg: regulator at 7 { + compatible = "regulator-fixed"; + regulator-name = "panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + }; + }; + sound { compatible = "nvidia,tegra-audio-max98090-venice2", "nvidia,tegra-audio-max98090";
Signature · 1 line
1.7.1.1
Stephen Warren
AppliedQuoted 3 lines · Laxman Dewangan
ams AS3722 is the system power manager module IC for the Tegra124 based Venice2 platform. Enable configs for gpio, pincontrol, rtc, regulator support from this device.
I've squashed patch 1/2 into Tegra's for-3.14/defconfig branch.
I've applied patch 2/2 to Tegra's for-3.14/dt branch.
Quoted 8 lines · Stephen Warren
Quoted 3 lines · Laxman Dewangan
ams AS3722 is the system power manager module IC for the Tegra124 based Venice2 platform. Enable configs for gpio, pincontrol, rtc, regulator support from this device.
I've squashed patch 1/2 into Tegra's for-3.14/defconfig branch.
I've applied patch 2/2 to Tegra's for-3.14/dt branch.
Actually, I'm dropping patch 2/2 since it causes a whole bunch of error spew during boot:
Quoted 17 lines
[ 0.628315] tegra124-pinctrl 70000868.pinmux: invalid group "dap2_dout_pp2" for function "rsvd4" [ 0.635309] tegra124-pinctrl 70000868.pinmux: does not have pin group dap2_dout_pp2 [ 0.642999] tegra124-pinctrl 70000868.pinmux: could not map group config for "dap2_dout_pp2"[ 0.731176] as3722-pinctrl as3722-pinctrl: pin gpio0 already requested by as3722-pinctrl; cannot claim for as3722-regulator [ 0.742312] as3722-pinctrl as3722-pinctrl: pin-0 (as3722-regulator) status -22 [ 0.749526] as3722-pinctrl as3722-pinctrl: could not request pin 0 (gpio0) from group gpio0 on device as3722-pinctrl [ 0.760133] as3722-regulator as3722-regulator: Error applying setting, reverse things back[ 0.835838] as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6 [ 0.843312] as3722-regulator as3722-regulator: regulator 8 register failed -517 [ 0.852263] platform as3722-regulator: Driver as3722-regulator requests probe deferral[ 0.984920] as3722-pinctrl as3722-pinctrl: pin gpio0 already requested by as3722-pinctrl; cannot claim for as3722-rtc [ 0.995537] as3722-pinctrl as3722-pinctrl: pin-0 (as3722-rtc) status -22 [ 1.002244] as3722-pinctrl as3722-pinctrl: could not request pin 0 (gpio0) from group gpio0 on device as3722-pinctrl [ 1.012848] as3722-rtc as3722-rtc: Error applying setting, reverse things back
Quoted 25 lines · Stephen Warren
Quoted 7 lines · Stephen Warren
Quoted 3 lines · Laxman Dewangan
ams AS3722 is the system power manager module IC for the Tegra124 based Venice2 platform. Enable configs for gpio, pincontrol, rtc, regulator support from this device.
I've squashed patch 1/2 into Tegra's for-3.14/defconfig branch.
I've applied patch 2/2 to Tegra's for-3.14/dt branch.
Actually, I'm dropping patch 2/2 since it causes a whole bunch of error spew during boot:
Quoted 14 lines
[ 0.628315] tegra124-pinctrl 70000868.pinmux: invalid group "dap2_dout_pp2" for function "rsvd4" [ 0.635309] tegra124-pinctrl 70000868.pinmux: does not have pin group dap2_dout_pp2 [ 0.642999] tegra124-pinctrl 70000868.pinmux: could not map group config for "dap2_dout_pp2" [ 0.731176] as3722-pinctrl as3722-pinctrl: pin gpio0 already requested by as3722-pinctrl; cannot claim for as3722-regulator [ 0.742312] as3722-pinctrl as3722-pinctrl: pin-0 (as3722-regulator) status -22 [ 0.749526] as3722-pinctrl as3722-pinctrl: could not request pin 0 (gpio0) from group gpio0 on device as3722-pinctrl [ 0.760133] as3722-regulator as3722-regulator: Error applying setting, reverse things back [ 0.835838] as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6 [ 0.843312] as3722-regulator as3722-regulator: regulator 8 register failed -517 [ 0.852263] platform as3722-regulator: Driver as3722-regulator requests probe deferral [ 0.984920] as3722-pinctrl as3722-pinctrl: pin gpio0 already requested by as3722-pinctrl; cannot claim for as3722-rtc [ 0.995537] as3722-pinctrl as3722-pinctrl: pin-0 (as3722-rtc) status -22 [ 1.002244] as3722-pinctrl as3722-pinctrl: could not request pin 0 (gpio0) from group gpio0 on device as3722-pinctrl [ 1.012848] as3722-rtc as3722-rtc: Error applying setting, reverse things back
I did not observe this issue in my log, probably overlooked. I will repro this and fix/update the issue/patch.
Thanks,
laxman