lpfc 8.3.44: Fixed IO hang when in msi mode.
Subsystems (2)
PATCH 1/7 lpfc 8.3.44: Fixed IO hang when in msi mode.
Fixed IO hang when in msi mode.
---
lpfc_scsi.c | 18 ++++++++++++++++++ lpfc_sli.c | 3 ++- 2 files changed, 20 insertions(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_scsi.c +18 -0
@@ -4782,6 +4782,24 @@ lpfc_queuecommand(struct Scsi_Host *shos &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);if (err) {atomic_dec (&ndlp->cmd_pending); +lpfc_printf_vlog (vport,KERN_INFO ,LOG_FCP , +"3376 FCP could not issue IOCB err %x" +"FCP cmd x%x <%d/%d> " +"sid: x%x did: x%x oxid: x%x " +"Data: x%x x%x x%x x%x\n" , + err, cmnd->cmnd[0 ], + cmnd->device ? cmnd->device->id :0xffff , + cmnd->device ? cmnd->device->lun :0xffff , + vport->fc_myDID, ndlp->nlp_DID, + phba->sli_rev ==LPFC_SLI_REV4 ? + lpfc_cmd->cur_iocbq.sli4_xritag :0xffff , + lpfc_cmd->cur_iocbq.iocb.ulpContext, + lpfc_cmd->cur_iocbq.iocb.ulpIoTag, + lpfc_cmd->cur_iocbq.iocb.ulpTimeout, + (uint32_t ) + (cmnd->request->timeout /1000 )); + + goto out_host_busy_free_buf; }if (phba->cfg_poll &ENABLE_FCP_RING_POLLING ) {
drivers/scsi/lpfc/lpfc_sli.c +2 -1
@@ -8032,7 +8032,8 @@ lpfc_sli4_scmd_to_wqidx_distr(struct lpfstruct lpfc_vector_map_info *cpup;int chann, cpu; -if (phba->cfg_fcp_io_sched ==LPFC_FCP_SCHED_BY_CPU ) { +if (phba->cfg_fcp_io_sched ==LPFC_FCP_SCHED_BY_CPU + && phba->cfg_fcp_io_channel >1 ) { cpu =smp_processor_id ();if (cpu < phba->sli4_hba.num_present_cpu) { cpup = phba->sli4_hba.cpu_map;
James Bottomley
maintainerQuoted 4 lines · James Smart
Fixed IO hang when in msi mode.
Signed-off-by James Smart <[email protected]>
There seems to be a lot of tab vs space checkpatch warnings in this series:
ERROR: code indent should use tabs where possible
#24: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4792:
+ cmnd->device ? cmnd->device->lun :
0xffff,$
WARNING: please, no spaces at the start of a line
#24: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4792:
+ cmnd->device ? cmnd->device->lun :
0xffff,$
ERROR: code indent should use tabs where possible
#25: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4793:
+ vport->fc_myDID, ndlp->nlp_DID,$
WARNING: please, no spaces at the start of a line
#25: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4793:
+ vport->fc_myDID, ndlp->nlp_DID,$
ERROR: code indent should use tabs where possible
#26: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4794:
+ phba->sli_rev == LPFC_SLI_REV4 ?$
WARNING: please, no spaces at the start of a line
#26: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4794:
+ phba->sli_rev == LPFC_SLI_REV4 ?$
ERROR: code indent should use tabs where possible
#27: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4795:
+ lpfc_cmd->cur_iocbq.sli4_xritag :
0xffff,$
WARNING: please, no spaces at the start of a line
#27: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4795:
+ lpfc_cmd->cur_iocbq.sli4_xritag :
0xffff,$
ERROR: code indent should use tabs where possible
#28: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4796:
+ lpfc_cmd->cur_iocbq.iocb.ulpContext,$
WARNING: please, no spaces at the start of a line
#28: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4796:
+ lpfc_cmd->cur_iocbq.iocb.ulpContext,$
ERROR: code indent should use tabs where possible
#29: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4797:
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag,$
WARNING: please, no spaces at the start of a line
#29: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4797:
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag,$
ERROR: code indent should use tabs where possible
#30: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4798:
+ lpfc_cmd->cur_iocbq.iocb.ulpTimeout,$
WARNING: please, no spaces at the start of a line
#30: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4798:
+ lpfc_cmd->cur_iocbq.iocb.ulpTimeout,$
ERROR: code indent should use tabs where possible
#31: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4799:
+ (uint32_t)$
WARNING: please, no spaces at the start of a line
#31: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4799:
+ (uint32_t)$
ERROR: code indent should use tabs where possible
#32: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4800:
+ (cmnd->request->timeout / 1000));$
WARNING: please, no spaces at the start of a line
#32: FILE: drivers/scsi/lpfc/lpfc_scsi.c:4800:
+ (cmnd->request->timeout / 1000));$
total: 9 errors, 9 warnings, 33 lines checked
NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile
I don't think it's your mailer otherwise the patch wouldn't have applied. Could you fix and resend the series?
Thanks,
James
yep. Sorry. Will resend shortly.
-- james
Quoted 100 lines · James Bottomley
Quoted 4 lines · James Smart
Fixed IO hang when in msi mode.
Signed-off-by James Smart <[email protected]>There seems to be a lot of tab vs space checkpatch warnings in this series:
ERROR: code indent should use tabs where possible
#24: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4792:
+cmnd->device?cmnd->device->lun:
0xffff,$WARNING: please, no spaces at the start of a line
#24: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4792:
+cmnd->device?cmnd->device->lun:
0xffff,$ERROR: code indent should use tabs where possible
#25: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4793:
+vport->fc_myDID, ndlp->nlp_DID,$WARNING: please, no spaces at the start of a line
#25: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4793:
+vport->fc_myDID, ndlp->nlp_DID,$ERROR: code indent should use tabs where possible
#26: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4794:
+phba->sli_rev==LPFC_SLI_REV4?$WARNING: please, no spaces at the start of a line
#26: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4794:
+phba->sli_rev==LPFC_SLI_REV4?$ERROR: code indent should use tabs where possible
#27: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4795:
+lpfc_cmd->cur_iocbq.sli4_xritag:
0xffff,$WARNING: please, no spaces at the start of a line
#27: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4795:
+lpfc_cmd->cur_iocbq.sli4_xritag:
0xffff,$ERROR: code indent should use tabs where possible
#28: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4796:
+ lpfc_cmd->cur_iocbq.iocb.ulpContext,$WARNING: please, no spaces at the start of a line
#28: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4796:
+ lpfc_cmd->cur_iocbq.iocb.ulpContext,$ERROR: code indent should use tabs where possible
#29: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4797:
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag,$WARNING: please, no spaces at the start of a line
#29: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4797:
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag,$ERROR: code indent should use tabs where possible
#30: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4798:
+ lpfc_cmd->cur_iocbq.iocb.ulpTimeout,$WARNING: please, no spaces at the start of a line
#30: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4798:
+ lpfc_cmd->cur_iocbq.iocb.ulpTimeout,$ERROR: code indent should use tabs where possible
#31: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4799:
+ (uint32_t)$WARNING: please, no spaces at the start of a line
#31: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4799:
+ (uint32_t)$ERROR: code indent should use tabs where possible
#32: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4800:
+ (cmnd->request->timeout/ 1000));$WARNING: please, no spaces at the start of a line
#32: FILE:drivers/scsi/lpfc/lpfc_scsi.c:4800:
+ (cmnd->request->timeout/ 1000));$total: 9 errors, 9 warnings, 33 lines checked
NOTE: whitespace errors detected, you may wish to use
scripts/cleanpatchor
scripts/cleanfileI don't think it's your mailer otherwise the patch wouldn't have applied. Could you fix and resend the series?
Thanks,
James