thermal: imx: add necessary clk operation
Subsystems (3)
PATCH v3 2/2 thermal: imx: add necessary clk operation
Thermal sensor needs pll3_usb_otg when measuring temperature, otherwise the temperature read will be incorrect, so need to enable this clk before sensor working, for alarm function, as hardware will take measurement periodically, so we should keep this clk always on once alarm function is enabled.
--- .../devicetree/bindings/thermal/imx-thermal.txt | 4 ++++ drivers/thermal/imx_thermal.c | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+)
Documentation/devicetree/bindings/thermal/imx-thermal.txt +4 -0
@@ -8,10 +8,14 @@ Required properties: calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Optional properties: +- clocks : thermal sensor's clock source. + Example: tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; + clocks = <&clks 172>; };
drivers/thermal/imx_thermal.c +18 -0
@@ -7,6 +7,7 @@* */ +#include <linux/clk.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/delay.h>
@@ -73,6 +74,7 @@ struct imx_thermal_data {unsigned long last_temp;bool irq_enabled;int irq; +struct clk *thermal_clk; }; static void imx_set_alarm_temp(struct imx_thermal_data *data,
@@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev)return ret; } + data->thermal_clk =devm_clk_get (&pdev->dev,NULL ); +if (IS_ERR (data->thermal_clk)) { +dev_warn (&pdev->dev,"failed to get thermal clk!\n" ); + }else { +/* +* Thermal sensor needs clk on to get correct value, normally +* we should enable its clk before taking measurement and disable +* clk after measurement is done, but if alarm function is enabled, +* hardware will auto measure the temperature periodically, so we +* need to keep the clk always on for alarm function. +*/ + ret =clk_prepare_enable (data->thermal_clk); +if (ret) +dev_warn (&pdev->dev,"failed to enable thermal clk: %d\n" , ret); + } +/* Enable measurements at ~ 10 Hz */ regmap_write (map,TEMPSENSE1 +REG_CLR ,TEMPSENSE1_MEASURE_FREQ ); measure_freq =DIV_ROUND_UP (32768 ,10 );/* 10 Hz */
Signature · 1 line
1.7.9.5
PATCH v3 2/2 thermal: imx: add necessary clk operation
Quoted 52 lines · Anson Huang
Thermal sensor needs
pll3_usb_otgwhen measuring temperature, otherwise the temperature read will be incorrect, so need to enable this clk before sensor working, for alarm function, as hardware will take measurement periodically, so we should keep this clk always on once alarm function is enabled.Signed-off-by Anson Huang <[email protected]>--- .../devicetree/bindings/thermal/imx-thermal.txt | 4 ++++ drivers/thermal/imx_thermal.c | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+)Documentation/devicetree/bindings/thermal/imx-thermal.txt +4
-0@@ -8,10 +8,14 @@ Required properties: calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Optional properties: +- clocks : thermal sensor's clock source. + Example: tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; + clocks = <&clks 172>; };drivers/thermal/imx_thermal.c +2
-0@@ -7,6 +7,7 @@* */ +#include <linux/clk.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/delay.h> @@ -73,6 +74,7 @@ struct imx_thermal_data {unsigned long last_temp;bool irq_enabled;int irq; +struct clk *thermal_clk; }; static void imx_set_alarm_temp(struct imx_thermal_data *data,
drivers/thermal/imx_thermal.c static int imx_thermal_probe(struct platform_device *pdev) · line 461
Quoted 3 lines
drivers/thermal/imx_thermal.c +0
-0@@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev)return ret; }
There are several reg writes before this point. Are you sure you won't need this clock for performing those operations?
Quoted 10 lines
drivers/thermal/imx_thermal.c +9
-0+ data->thermal_clk =devm_clk_get (&pdev->dev,NULL ); +if (IS_ERR (data->thermal_clk)) { +dev_warn (&pdev->dev,"failed to get thermal clk!\n" ); + }else { +/* +* Thermal sensor needs clk on to get correct value, normally +* we should enable its clk before taking measurement and disable +* clk after measurement is done, but if alarm function is enabled, +* hardware will auto measure the temperature periodically, so we
drivers/thermal/imx_thermal.c static int imx_thermal_probe(struct platform_device *pdev) · line 480
Quoted 10 lines
drivers/thermal/imx_thermal.c +7
-0+* need to keep the clk always on for alarm function. +*/ + ret =clk_prepare_enable (data->thermal_clk); +if (ret) +dev_warn (&pdev->dev,"failed to enable thermal clk: %d\n" , ret); + } +/* Enable measurements at ~ 10 Hz */ regmap_write (map,TEMPSENSE1 +REG_CLR ,TEMPSENSE1_MEASURE_FREQ ); measure_freq =DIV_ROUND_UP (32768 ,10 );/* 10 Hz */
Don't you need to release the clock when .remove is called either on driver or device removal?
What about suspend / resume path? Do you want to keep this clock on when suspending? Is it gonna work or prevent your system to enter low power states?
Signature · 11 lines
You have got to be excited about what you are doing. (L. Lamport) Eduardo Valentin -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 295 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131219/0435bd46/attachment.sig>
PATCH v3 2/2 thermal: imx: add necessary clk operation
Sent from Anson's iPhone
Quoted 53 lines
? 2013?12?19??21:13?"Eduardo Valentin" <[email protected]> ???
Quoted 51 lines · Anson Huang
Thermal sensor needs
pll3_usb_otgwhen measuring temperature, otherwise the temperature read will be incorrect, so need to enable this clk before sensor working, for alarm function, as hardware will take measurement periodically, so we should keep this clk always on once alarm function is enabled.Signed-off-by Anson Huang <[email protected]>---
.../devicetree/bindings/thermal/imx-thermal.txt| 4 ++++drivers/thermal/imx_thermal.c| 18 ++++++++++++++++++2 files changed, 22 insertions(+)Documentation/devicetree/bindings/thermal/imx-thermal.txt +3
-0@@ -8,10 +8,14 @@ Required properties: calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Optional properties: +- clocks : thermal sensor's clock source. +Example:
tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>;+ clocks = <&clks 172>;
};drivers/thermal/imx_thermal.c +2
-0@@ -7,6 +7,7 @@* */ +#include <linux/clk.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/delay.h> @@ -73,6 +74,7 @@ struct imx_thermal_data {unsigned long last_temp;bool irq_enabled;int irq; +struct clk *thermal_clk; };
Quoted 7 lines
drivers/thermal/imx_thermal.c static int imx_thermal_probe(struct platform_device *pdev) · line 460
Quoted 4 lines
drivers/thermal/imx_thermal.c +0
-0static void imx_set_alarm_temp(struct imx_thermal_data *data,@@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev)return ret; }There are several reg writes before this point. Are you sure you won't need this clock for performing those operations?
thermal reg's access uses system ipg clock which is always on, so no need to enable it, actually there is no clock gate for this ipg clock.
Quoted 21 lines
Quoted 10 lines
drivers/thermal/imx_thermal.c +9
-0+ data->thermal_clk =devm_clk_get (&pdev->dev,NULL ); +if (IS_ERR (data->thermal_clk)) { +dev_warn (&pdev->dev,"failed to get thermal clk!\n" ); + }else { +/* +* Thermal sensor needs clk on to get correct value, normally +* we should enable its clk before taking measurement and disable +* clk after measurement is done, but if alarm function is enabled, +* hardware will auto measure the temperature periodically, so we drivers/thermal/imx_thermal.c static int imx_thermal_probe(struct platform_device *pdev) · line 480
Quoted 10 lines
drivers/thermal/imx_thermal.c +7
-0+* need to keep the clk always on for alarm function. +*/ + ret =clk_prepare_enable (data->thermal_clk); +if (ret) +dev_warn (&pdev->dev,"failed to enable thermal clk: %d\n" , ret); + } +/* Enable measurements at ~ 10 Hz */ regmap_write (map,TEMPSENSE1 +REG_CLR ,TEMPSENSE1_MEASURE_FREQ ); measure_freq =DIV_ROUND_UP (32768 ,10 );/* 10 Hz */
Quoted 2 lines
Don't you need to release the clock when .remove is called either on driver or device removal?
yes, thanks for reminder.
Quoted 4 lines
What about suspend / resume path? Do you want to keep this clock on when suspending? Is it gonna work or prevent your system to enter low power states?
no need to disable this clock in suspend, as CCM will disable all clocks after entering stop mode. thermal sensor should be powered down in its suspend function. it will not impact any low power mode of thermal sensor.
BTW, current thermal driver will block system suspend as it is always be powered up and suspend function will return error, I will create another patch to fix that later.
Quoted 8 lines
Signature · 4 lines
-- You have got to be excited about what you are doing. (L. Lamport) Eduardo Valentin