Skip to contentSkip to conversation

perf config: ignore generated files in feature-checks

PATCH In review Chunwei Chen 5 participants 12 messages Dec 19, 2013 – Jan 12, 2014 perf events

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 perf config: ignore generated files in feature-checks

---
 tools/perf/config/feature-checks/.gitignore |    2 ++
 1 file changed, 2 insertions(+)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/feature-checks/.gitignore new file +2 -0
new file mode 100644
index 0000000..9662c68
@@ -0,0 +1,2 @@
+test-all
+*.d
Signature · 1 line
1.7.9.5
#1 lore raw
Quoted 12 lines · Chunwei Chen
---
 tools/perf/config/feature-checks/.gitignore |    2 ++
 1 file changed, 2 insertions(+)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/feature-checks/.gitignore new file +0 -0
new file mode 100644
index 0000000..9662c68

tools/perf/config/feature-checks/.gitignore line 2

Quoted 2 lines
tools/perf/config/feature-checks/.gitignore new file +2 -0
@@ -0,0 +1,2 @@
+test-all
+*.d

Why? These are cleaned out on 'make clean'.

Thanks,

Ingo

author
#2 lore raw

Why not? They're generated files aren't they?

By the way, I just found out that test-* will be built depend on the detected features.
Should I include them all?

Thanks,
Chunwei Chen

2013/12/19 Ingo Molnar <[email protected]>:

Quoted 23 lines · Chunwei Chen
Quoted 13 lines
---
 tools/perf/config/feature-checks/.gitignore |    2 ++
 1 file changed, 2 insertions(+)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/feature-checks/.gitignore new file +0 -0
new file mode 100644
index 0000000..9662c68

tools/perf/config/feature-checks/.gitignore line 2

Quoted 2 lines
tools/perf/config/feature-checks/.gitignore new file +2 -0
@@ -0,0 +1,2 @@
+test-all
+*.d

Why? These are cleaned out on 'make clean'.

Thanks,

Ingo

#3 lore raw
Quoted 1 line · David Chen

Why not? They're generated files aren't they?

Yes, indeed, you are right, they should be included in the .gitignore.

Quoted 3 lines

By the way, I just found out that test-* will be built depend on the detected features.
Should I include them all?

Yes, that would have been my next observation :-)

I'd suggest that instead of enumerating them all in the .gitignore file we should change the naming of the feature check binaries to something like test-<xyz>.bin or so, so that a simple test-*.bin pattern will ignore all these generated binaries.

Thanks,

Ingo

author
#4 lore raw

How about this:

test-*
!*.c

So that we don't ignore *.c and we don't have to change file name. Anyway, I'll reupload tomorrow when I have my computer.

Thanks,
Chunwei Chen

#5 lore raw
Quoted 4 lines · David Chen

How about this:

test-*
!*.c

Still looks a bit too generic to me.

Quoted 2 lines

So that we don't ignore *.c and we don't have to change file name. Anyway, I'll reupload tomorrow when I have my computer.

I think we should change the feature test binaries to an easy to match pattern.

But either way it works for me.

Thanks,

Ingo

#6 lore raw
Quoted 1 line

From 362201bf3259cc01c99531766395fdba0c0f3789 Mon Sep 17 00:00:00 2001

From: Chunwei Chen <[email protected]>
Date: Thu, 19 Dec 2013 15:41:22 +0800
Subject: [PATCH] perf config: ignore generated files in feature-checks

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

---
 tools/perf/config/Makefile                  |   6 +-
 tools/perf/config/feature-checks/.gitignore |   2 +
 tools/perf/config/feature-checks/Makefile   | 114 ++++++++++++++--------------
 3 files changed, 62 insertions(+), 60 deletions(-)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/Makefile +3 -3
index f7d11a8..40e08d1 100644
@@ -102,7 +102,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
@@ -150,7 +150,7 @@ CORE_FEATURE_TESTS =			\
 # to skip the print-out of the long features list if the file
 # existed before and after it was built:
 #
-ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all.bin),)
   test-all-failed := 1
 else
   test-all-failed := 0
@@ -180,7 +180,7 @@ ifeq ($(feature-all), 1)
   #
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
 else
-  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(CORE_FEATURE_TESTS)) >/dev/null 2>&1)
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
 endif
 
tools/perf/config/feature-checks/.gitignore new file +2 -0
new file mode 100644
index 0000000..80f3da0
@@ -0,0 +1,2 @@
+*.d
+*.bin
tools/perf/config/feature-checks/Makefile +57 -57

189 lines not on this page · raw message

Signature · 1 line
1.8.5.2
Reviewed-by
#7 lore raw
Quoted 10 lines · Chunwei Chen

From 362201bf3259cc01c99531766395fdba0c0f3789 Mon Sep 17 00:00:00 2001
From: Chunwei Chen <[email protected]>
Date: Thu, 19 Dec 2013 15:41:22 +0800
Subject: [PATCH] perf config: ignore generated files in feature-checks

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

Thanks!

Ingo

#8 lore raw
In reply to Chunwei Chen

Em Fri, Dec 20, 2013 at 12:16:40PM +0800, Chunwei Chen escreveu:

Quoted 10 lines
Quoted 1 line

From 362201bf3259cc01c99531766395fdba0c0f3789 Mon Sep 17 00:00:00 2001

From: Chunwei Chen <[email protected]>
Date: Thu, 19 Dec 2013 15:41:22 +0800
Subject: [PATCH] perf config: ignore generated files in feature-checks

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

Please make sure it applies to the perf/core branch in:

git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git

Just tried and it didn't applies.

- Arnaldo

Quoted 244 lines
---
 tools/perf/config/Makefile                  |   6 +-
 tools/perf/config/feature-checks/.gitignore |   2 +
 tools/perf/config/feature-checks/Makefile   | 114 ++++++++++++++--------------
 3 files changed, 62 insertions(+), 60 deletions(-)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/Makefile +3 -3
index f7d11a8..40e08d1 100644
@@ -102,7 +102,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
@@ -150,7 +150,7 @@ CORE_FEATURE_TESTS =			\
 # to skip the print-out of the long features list if the file
 # existed before and after it was built:
 #
-ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all.bin),)
   test-all-failed := 1
 else
   test-all-failed := 0
@@ -180,7 +180,7 @@ ifeq ($(feature-all), 1)
   #
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
 else
-  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(CORE_FEATURE_TESTS)) >/dev/null 2>&1)
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
 endif
 
tools/perf/config/feature-checks/.gitignore new file +2 -0
new file mode 100644
index 0000000..80f3da0
@@ -0,0 +1,2 @@
+*.d
+*.bin
tools/perf/config/feature-checks/Makefile +57 -57
index 87e7900..e2bc0ed 100644
@@ -1,94 +1,94 @@
 
 FILES=					\
-	test-all			\
-	test-backtrace			\
-	test-bionic			\
-	test-dwarf			\
-	test-fortify-source		\
-	test-glibc			\
-	test-gtk2			\
-	test-gtk2-infobar		\
-	test-hello			\
-	test-libaudit			\
-	test-libbfd			\
-	test-liberty			\
-	test-liberty-z			\
-	test-cplus-demangle		\
-	test-libelf			\
-	test-libelf-getphdrnum		\
-	test-libelf-mmap		\
-	test-libnuma			\
-	test-libperl			\
-	test-libpython			\
-	test-libpython-version		\
-	test-libslang			\
-	test-libunwind			\
-	test-libunwind-debug-frame	\
-	test-on-exit			\
-	test-stackprotector-all		\
-	test-stackprotector		\
-	test-timerfd
+	test-all.bin			\
+	test-backtrace.bin		\
+	test-bionic.bin			\
+	test-dwarf.bin			\
+	test-fortify-source.bin		\
+	test-glibc.bin			\
+	test-gtk2.bin			\
+	test-gtk2-infobar.bin		\
+	test-hello.bin			\
+	test-libaudit.bin		\
+	test-libbfd.bin			\
+	test-liberty.bin		\
+	test-liberty-z.bin		\
+	test-cplus-demangle.bin		\
+	test-libelf.bin			\
+	test-libelf-getphdrnum.bin	\
+	test-libelf-mmap.bin		\
+	test-libnuma.bin		\
+	test-libperl.bin		\
+	test-libpython.bin		\
+	test-libpython-version.bin	\
+	test-libslang.bin		\
+	test-libunwind.bin		\
+	test-libunwind-debug-frame.bin	\
+	test-on-exit.bin		\
+	test-stackprotector-all.bin	\
+	test-stackprotector.bin		\
+	test-timerfd.bin
 
 CC := $(CC) -MD
 
 all: $(FILES)
 
-BUILD = $(CC) $(CFLAGS) $(LDFLAGS) -o $(OUTPUT)$@ [email protected]
+BUILD = $(CC) $(CFLAGS) $(LDFLAGS) -o $(OUTPUT)$@ $(patsubst %.bin,%.c,$@)
 
 ###############################
 
-test-all:
+test-all.bin:
 	$(BUILD) -Werror -fstack-protector -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma $(LIBUNWIND_LIBS) -lelf -laudit -I/usr/include/slang -lslang $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
 
-test-hello:
+test-hello.bin:
 	$(BUILD)
 
-test-stackprotector-all:
+test-stackprotector-all.bin:
 	$(BUILD) -Werror -fstack-protector-all
 
-test-stackprotector:
+test-stackprotector.bin:
 	$(BUILD) -Werror -fstack-protector -Wstack-protector
 
-test-fortify-source:
+test-fortify-source.bin:
 	$(BUILD) -O2 -Werror -D_FORTIFY_SOURCE=2
 
-test-bionic:
+test-bionic.bin:
 	$(BUILD)
 
-test-libelf:
+test-libelf.bin:
 	$(BUILD) -lelf
 
-test-glibc:
+test-glibc.bin:
 	$(BUILD)
 
-test-dwarf:
+test-dwarf.bin:
 	$(BUILD) -ldw
 
-test-libelf-mmap:
+test-libelf-mmap.bin:
 	$(BUILD) -lelf
 
-test-libelf-getphdrnum:
+test-libelf-getphdrnum.bin:
 	$(BUILD) -lelf
 
-test-libnuma:
+test-libnuma.bin:
 	$(BUILD) -lnuma
 
-test-libunwind:
+test-libunwind.bin:
 	$(BUILD) $(LIBUNWIND_LIBS) -lelf
 
-test-libunwind-debug-frame:
+test-libunwind-debug-frame.bin:
 	$(BUILD) $(LIBUNWIND_LIBS) -lelf
 
-test-libaudit:
+test-libaudit.bin:
 	$(BUILD) -laudit
 
-test-libslang:
+test-libslang.bin:
 	$(BUILD) -I/usr/include/slang -lslang
 
-test-gtk2:
+test-gtk2.bin:
 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
 
-test-gtk2-infobar:
+test-gtk2-infobar.bin:
 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
 
 grep-libs  = $(filter -l%,$(1))
@@ -100,7 +100,7 @@ PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
 PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
 FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
 
-test-libperl:
+test-libperl.bin:
 	$(BUILD) $(FLAGS_PERL_EMBED)
 
 override PYTHON := python
@@ -117,31 +117,31 @@ PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
 PYTHON_EMBED_CCOPTS = $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
 FLAGS_PYTHON_EMBED = $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
 
-test-libpython:
+test-libpython.bin:
 	$(BUILD) $(FLAGS_PYTHON_EMBED)
 
-test-libpython-version:
+test-libpython-version.bin:
 	$(BUILD) $(FLAGS_PYTHON_EMBED)
 
-test-libbfd:
+test-libbfd.bin:
 	$(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
 
-test-liberty:
+test-liberty.bin:
 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty
 
-test-liberty-z:
+test-liberty-z.bin:
 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty -lz
 
-test-cplus-demangle:
+test-cplus-demangle.bin:
 	$(BUILD) -liberty
 
-test-on-exit:
+test-on-exit.bin:
 	$(BUILD)
 
-test-backtrace:
+test-backtrace.bin:
 	$(BUILD)
 
-test-timerfd:
+test-timerfd.bin:
 	$(BUILD)
 
 -include *.d
Signature · 1 line
1.8.5.2
#9 lore raw
Quoted 1 line

From ce62a386df25ec50e13487c7b56e09c71c2abf4c Mon Sep 17 00:00:00 2001

From: Chunwei Chen <[email protected]>
Date: Sat, 21 Dec 2013 13:15:07 +0800
Subject: [PATCH] perf config: ignore generated files in feature-checks

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

---
 tools/perf/config/Makefile                  |   6 +-
 tools/perf/config/feature-checks/.gitignore |   2 +
 tools/perf/config/feature-checks/Makefile   | 110 ++++++++++++++--------------
 3 files changed, 60 insertions(+), 58 deletions(-)
 create mode 100644 tools/perf/config/feature-checks/.gitignore
tools/perf/config/Makefile +3 -3
index 5a1f4df..14faeeb 100644
@@ -126,7 +126,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
@@ -173,7 +173,7 @@ CORE_FEATURE_TESTS =			\
 # to skip the print-out of the long features list if the file
 # existed before and after it was built:
 #
-ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all.bin),)
   test-all-failed := 1
 else
   test-all-failed := 0
@@ -203,7 +203,7 @@ ifeq ($(feature-all), 1)
   #
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
 else
-  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(CORE_FEATURE_TESTS)) >/dev/null 2>&1)
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
 endif
 
tools/perf/config/feature-checks/.gitignore new file +2 -0
new file mode 100644
index 0000000..80f3da0
@@ -0,0 +1,2 @@
+*.d
+*.bin
tools/perf/config/feature-checks/Makefile +55 -55

183 lines not on this page · raw message

Signature · 1 line
1.8.1.2
Acked-by
#10 lore raw
Quoted 4 lines · Chunwei Chen

From ce62a386df25ec50e13487c7b56e09c71c2abf4c Mon Sep 17 00:00:00 2001
From: Chunwei Chen <[email protected]>
Date: Sat, 21 Dec 2013 13:15:07 +0800
Subject: [PATCH] perf config: ignore generated files in feature-checks

seems superfluous ^^^

Quoted 6 lines

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

jirka

#11 lore raw

[tip:perf/core] perf config: Ignore generated files in feature-checks

In reply to Chunwei Chen
perf config: Ignore generated files in feature-checks
Commit-ID:  56560ec692c142bb9ee404764e3b67999031ad19
Gitweb:     http://git.kernel.org/tip/56560ec692c142bb9ee404764e3b67999031ad19
Author:     Chunwei Chen <[email protected]>
AuthorDate: Sat, 21 Dec 2013 13:48:11 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 23 Dec 2013 16:49:51 -0300

perf config: Ignore generated files in feature-checks

1. Rename the test-* binary files to test-*.bin for easier pattern matching as suggested by Ingo.
2. Ignore *.bin and *.d files.

---
 tools/perf/config/Makefile                  |   6 +-
 tools/perf/config/feature-checks/.gitignore |   2 +
 tools/perf/config/feature-checks/Makefile   | 110 ++++++++++++++--------------
 3 files changed, 60 insertions(+), 58 deletions(-)
tools/perf/config/Makefile +3 -3
index 5a1f4df..14faeeb 100644
@@ -126,7 +126,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
@@ -173,7 +173,7 @@ CORE_FEATURE_TESTS =			\
 # to skip the print-out of the long features list if the file
 # existed before and after it was built:
 #
-ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all.bin),)
   test-all-failed := 1
 else
   test-all-failed := 0
@@ -203,7 +203,7 @@ ifeq ($(feature-all), 1)
   #
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
 else
-  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(CORE_FEATURE_TESTS)) >/dev/null 2>&1)
   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
 endif
 
tools/perf/config/feature-checks/.gitignore new file +2 -0
new file mode 100644
index 0000000..80f3da0
@@ -0,0 +1,2 @@
+*.d
+*.bin
tools/perf/config/feature-checks/Makefile +55 -55

183 lines not on this page · raw message