Can we use SCSI error trace events to monitor SCSI hardware problems ?
Hello, Hannes
I found you owned a project on github named "md_monitor". It supports MD array by using mdadm tool. But how about generic SCSI devices ? There is a "scsi_dispatch_cmd_error" tracepoint in SCSI subsystem, from which we can get something useful output via sysfs. We can do more work in userspace. Now I setup a tracepoint in "scsi_print_result" and trace scsi cmd result. By reading host status and sense data, I can find out anything wrong while executing SCSI commands. Does it make sense or it could be better ?
Thanks,
Junliang Li
Quoted 11 lines · Junliang Li
Hello, Hannes
I found you owned a project on github named "
md_monitor". It supports MD array by using mdadm tool. But how about generic SCSI devices ? There is a "scsi_dispatch_cmd_error" tracepoint in SCSI subsystem, from which we can get something useful output via sysfs. We can do more work in userspace. Now I setup a tracepoint in "scsi_print_result" and trace scsi cmd result. By reading host status and sense data, I can find out anything wrong while executing SCSI commands. Does it make sense or it could be better ?
Hmm. Not sure if that gives you what you want.
md_monitor was primarily designed to handle transient I/O errors
when running under md, and re-adding failed devices if the I/O error condition was found to be resolved. For DASD the entire functionality was implemented into md_monitor,
but when running on top of a SCSI device it should better be handled
via multipathing, as then most of the functionality is already
implemented there.
However, one of the goals of md_monitor was to guarantee a specific response time, which isn't easily possible with SCSI devices. With the updated SCSI EH it might be easier, but the code would need to be updated and tested to work on SCSI devices, too.
Cheers,
Hannes
Signature · 8 lines
Dr. Hannes Reinecke zSeries & Storage [email protected] +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html