Skip to contentSkip to conversation

powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI

PATCH New Prabhakar Kushwaha 2 participants 2 messages Jan 13, 2014 – Jan 21, 2014 Kbuild

lore
Share & tools
lore

Prabhakar Kushwaha

author
#0 lore raw

PATCH v2 1/1 powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI

Rename CONFIG_PBLRCW_CONFIG and CONFIG_PBLRCW_CONFIG.

Also add their details in README.

Signed-off-by Prabhakar Kushwaha <[email protected]>

---
changes for v2: Incorporated Wolfgang's comments
- Added more description in README

 Makefile                            |    4 ++--
 README                              |    9 +++++++++
 include/configs/B4860QDS.h          |    4 ++--
 include/configs/P2041RDB.h          |    5 +++--
 include/configs/T1040QDS.h          |    4 ++--
 include/configs/T2080QDS.h          |    4 ++--
 include/configs/T4240QDS.h          |    4 ++--
 include/configs/corenet_ds.h        |   14 +++++++++-----
 include/configs/km/kmp204x-common.h |    4 ++--
 9 files changed, 33 insertions(+), 19 deletions(-)
Makefile +2 -2
index e6f6edb..beee7ec 100644
@@ -419,8 +419,8 @@ $(obj)u-boot.kwb:       $(obj)u-boot.bin
 		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
 
 $(obj)u-boot.pbl:	$(obj)u-boot.bin
-		$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
-		-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
+		$(obj)tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \
+		-R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \
 		-d $< $@
 
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
README +9 -0
index a0646c3..9b3aaf4 100644
@@ -472,6 +472,15 @@ The following options need to be configured:
 		Board config to use DDR3. It can be enabled for SoCs with
 		Freescale DDR3 controllers.
 
+		CONFIG_SYS_FSL_PBL_PBI
+		It enables addition of RCW (Power on reset configuration) in built image.
+		Please refer doc/README.pblimage for more details
+
+		CONFIG_SYS_FSL_PBL_RCW
+		It adds PBI(pre-boot instructions) commands in u-boot build image.
+		PBI commands can be used to configure SoC before it starts the execution.
+		Please refer doc/README.pblimage for more details
+
 - Intel Monahans options:
 		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
include/configs/B4860QDS.h +2 -2
index c182158..c667229 100644
@@ -16,8 +16,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI	$(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW	$(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
include/configs/P2041RDB.h +3 -2
index ee71252..2b81cbe 100644
@@ -18,8 +18,9 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW \
+			$(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
include/configs/T1040QDS.h +2 -2
index 7d0bc04..74d8049 100644
@@ -32,8 +32,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg
 #endif
 
 /* High Level Configuration Options */
include/configs/T2080QDS.h +2 -2
index bff001f..b35e107 100644
@@ -45,8 +45,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
 #endif
 
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
include/configs/T4240QDS.h +2 -2
index c96df54..1f1177b 100644
@@ -21,8 +21,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
include/configs/corenet_ds.h +9 -5
index 969b990..3a1826d 100644
@@ -15,15 +15,19 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
 #if defined(CONFIG_P3041DS)
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg
+#define CONFIG_SYS_FSL_PBL_RCW \
+			$(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg
 #elif defined(CONFIG_P4080DS)
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
+#define CONFIG_SYS_FSL_PBL_RCW \
+			$(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
 #elif defined(CONFIG_P5020DS)
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
+#define CONFIG_SYS_FSL_PBL_RCW \
+			$(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
 #elif defined(CONFIG_P5040DS)
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg
+#define CONFIG_SYS_FSL_PBL_RCW \
+			$(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg
 #endif
 #endif
include/configs/km/kmp204x-common.h +2 -2
index 50330cc..0463fcb 100644
@@ -24,8 +24,8 @@
 #define CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/keymile/kmp204x/pbi.cfg
-#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/keymile/kmp204x/pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v2 1/1 powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI

Quoted 9 lines · Prabhakar Kushwaha

Rename CONFIG_PBLRCW_CONFIG and CONFIG_PBLRCW_CONFIG.

Also add their details in README.

Signed-off-by Prabhakar Kushwaha <[email protected]>

---
changes for v2: Incorporated Wolfgang's comments
- Added more description in README

Applied to u-boot-mpc85xx master branch. Awaiting upstream.

York