ARM: multi_v7: copy most options from tegra_defconfig
Subsystems (2)
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
From: Stephen Warren <[email protected]>
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories:
* Enable more Tegra SoC options/drivers.
* Enable more drivers for Tegra boards.
* Enable more options that are useful for running distros.
The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after
"make multi_v7_defconfig".
--- arch/arm/configs/multi_v7_defconfig | 163 +++++++++++++++++++++++++++++++++--- 1 file changed, 150 insertions(+), 13 deletions(-)
arch/arm/configs/multi_v7_defconfig +150 -13
@@ -1,7 +1,12 @@ +CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y
@@ -11,8 +16,8 @@ CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_GPIO_PCA953X=y -CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HI3xxx=y +CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MXC=y CONFIG_MACH_IMX51_DT=y
@@ -38,7 +43,7 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_TEGRA_PCI=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y
@@ -49,19 +54,53 @@ CONFIG_ARCH_VEXPRESS_CA9X4=y CONFIG_ARCH_VIRT=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_SMP=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y CONFIG_HIGHPTE=y +CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y CONFIG_OMAP_OCP2SCP=y +CONFIG_MTD=y +CONFIG_MTD_M25P80=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_ICS932S401=y +CONFIG_APDS9802ALS=y +CONFIG_ISL29003=y CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SATA_HIGHBANK=y
@@ -70,12 +109,26 @@ CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_KS8851=y +CONFIG_R8169=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y -CONFIG_ICPLUS_PHY=y -CONFIG_MDIO_SUN4I=y CONFIG_TI_CPSW=y +CONFIG_ICPLUS_PHY=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_CROS_EC=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_MPU3050=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y
@@ -98,6 +151,9 @@ CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y
@@ -106,22 +162,66 @@ CONFIG_SPI_OMAP24XX=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y CONFIG_SPI_TEGRA114=y +CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y -CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TWL4030=y -CONFIG_REGULATOR_GPIO=y +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS6586X=y +CONFIG_GPIO_TPS65910=y +CONFIG_BATTERY_SBS=y +CONFIG_CHARGER_TPS65090=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_SENSORS_LM90=y +CONFIG_MFD_AS3722=y +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_MAX8907=y +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_REGULATOR_TPS6586X=y +CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y CONFIG_DRM=y -CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y CONFIG_FB_SIMPLE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_RT5640=y +CONFIG_SND_SOC_TEGRA_WM8753=y +CONFIG_SND_SOC_TEGRA_WM8903=y +CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y +CONFIG_SND_SOC_TEGRA_MAX98090=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y
@@ -132,8 +232,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_OMAP_USB2=y CONFIG_OMAP_USB3=y CONFIG_SAMSUNG_USB2PHY=y CONFIG_SAMSUNG_USB3PHY=y
@@ -144,19 +242,32 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS6586X=y +CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y CONFIG_RTC_DRV_TEGRA=y
@@ -165,21 +276,47 @@ CONFIG_DW_DMAC=y CONFIG_TEGRA20_APB_DMA=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y -CONFIG_TI_EDMA=y CONFIG_PL330_DMA=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y +CONFIG_STAGING=y +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_NVEC_POWER=y +CONFIG_NVEC_PAZ00=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_MEMORY=y +CONFIG_IIO=y +CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y +CONFIG_OMAP_USB2=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_LOCKUP_DETECTOR=y +CONFIG_CRYPTO_DEV_TEGRA_AES=y
Signature · 1 line
1.8.1.5
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 24 lines · Stephen Warren
arch/arm/configs/multi_v7_defconfig +13
-1@@ -165,21 +276,47 @@ CONFIG_DW_DMAC=y CONFIG_TEGRA20_APB_DMA=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y -CONFIG_TI_EDMA=y CONFIG_PL330_DMA=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y +CONFIG_STAGING=y +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_NVEC_POWER=y +CONFIG_NVEC_PAZ00=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_MEMORY=y +CONFIG_IIO=y +CONFIG_AK8975=y CONFIG_PWM=y
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 307
Quoted 10 lines
arch/arm/configs/multi_v7_defconfig +9
-0+CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y +CONFIG_OMAP_USB2=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y
I think it makes sense to just enable EXT4_USE_FOR_EXT23 instead.
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 184
Quoted 13 lines
arch/arm/configs/multi_v7_defconfig +4
-1CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y
Why are you disabling DEBUG_KERNEL?
-Olof
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 11 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 307
Quoted 7 lines · Stephen Warren
arch/arm/configs/multi_v7_defconfig +7
-0+CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=yI think it makes sense to just enable
EXT4_USE_FOR_EXT23instead.
It looks like that's the default if EXT2_FS/EXT3_FS aren't enabled. I'll go test that out.
Quoted 7 lines
Quoted 7 lines
CONFIG_EXT4_FS=yarch/arm/configs/multi_v7_defconfig +4
-0+CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y
Quoted 8 lines
Quoted 6 lines
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=yWhy are you disabling
DEBUG_KERNEL?
It's not disabled, it ends up getting selected by something else, so doesn't appear in the defconfig.
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 32 lines · Stephen Warren
Quoted 11 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 307
Quoted 7 lines · Stephen Warren
arch/arm/configs/multi_v7_defconfig +7
-0+CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=yI think it makes sense to just enable
EXT4_USE_FOR_EXT23instead.It looks like that's the default if EXT2_FS/EXT3_FS aren't enabled. I'll go test that out.
Quoted 7 lines
Quoted 7 lines
CONFIG_EXT4_FS=yarch/arm/configs/multi_v7_defconfig +4
-0+CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=yQuoted 8 lines
Quoted 6 lines
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=yWhy are you disabling
DEBUG_KERNEL?
Quoted 2 lines
It's not disabled, it ends up getting selected by something else, so doesn't appear in the defconfig.
Ok, fair enough. Applied.
-Olof
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 33 lines · Olof Johansson
Quoted 32 lines · Stephen Warren
Quoted 11 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 307
Quoted 7 lines · Stephen Warren
arch/arm/configs/multi_v7_defconfig +7
-0+CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=yI think it makes sense to just enable
EXT4_USE_FOR_EXT23instead.It looks like that's the default if EXT2_FS/EXT3_FS aren't enabled. I'll go test that out.
Quoted 15 lines
arch/arm/configs/multi_v7_defconfig CONFIG_DW_DMAC=y · line 184
Quoted 13 lines
CONFIG_EXT4_FS=yarch/arm/configs/multi_v7_defconfig +4
-1+CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=yWhy are you disabling
DEBUG_KERNEL?
Quoted 4 lines
Quoted 2 lines
It's not disabled, it ends up getting selected by something else, so doesn't appear in the defconfig.
Ok, fair enough. Applied.
Actually, this one ended up getting messy. We've had multi_v7_defconfig updates in several branches so this doesn't apply cleanly anywhere.
I'll apply it on top of for-next where the various branches are merged. It means we'll have to merge it late. Not a big deal, but please help me remember it in case it for some reason gets lost in the shuffle.
-Olof
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 7 lines · Olof Johansson
Quoted 6 lines · Olof Johansson
Quoted 5 lines · Stephen Warren
Quoted 4 lines · Olof Johansson
On Fri, Dec 20, 2013 at 12:04 PM, Stephen Warren <[email protected]> wrote:
multi_v7_defconfigwas missing a large number of options that were integra_defconfig. This patch adds them. The changes fall into the following categories:
...
Quoted 10 lines
Quoted 1 line
Ok, fair enough. Applied.
Actually, this one ended up getting messy. We've had
multi_v7_defconfigupdates in several branches so this doesn't apply cleanly anywhere.I'll apply it on top of for-next where the various branches are merged. It means we'll have to merge it late. Not a big deal, but please help me remember it in case it for some reason gets lost in the shuffle.
I guess this is the correct time to remind you about this? That said, the patch is in linux-next, so perhaps that counts as not having been lost:-)
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 23 lines · Stephen Warren
Quoted 7 lines · Olof Johansson
Quoted 6 lines · Olof Johansson
Quoted 5 lines · Stephen Warren
Quoted 4 lines · Olof Johansson
On Fri, Dec 20, 2013 at 12:04 PM, Stephen Warren <[email protected]> wrote:
multi_v7_defconfigwas missing a large number of options that were integra_defconfig. This patch adds them. The changes fall into the following categories:...
Quoted 10 lines
Quoted 1 line
Ok, fair enough. Applied.
Actually, this one ended up getting messy. We've had
multi_v7_defconfigupdates in several branches so this doesn't apply cleanly anywhere.I'll apply it on top of for-next where the various branches are merged. It means we'll have to merge it late. Not a big deal, but please help me remember it in case it for some reason gets lost in the shuffle.
I guess this is the correct time to remind you about this? That said, the patch is in linux-next, so perhaps that counts as not having been lost:-)
PATCH 1/1 ARM: multi_v7: copy most options from tegra_defconfig
Quoted 16 lines · Olof Johansson
Quoted 15 lines · Stephen Warren
Quoted 7 lines · Olof Johansson
Quoted 6 lines · Olof Johansson
Quoted 5 lines · Stephen Warren
Quoted 4 lines · Olof Johansson
On Fri, Dec 20, 2013 at 12:04 PM, Stephen Warren <[email protected]> wrote:
multi_v7_defconfigwas missing a large number of options that were integra_defconfig. This patch adds them. The changes fall into the following categories:...
Quoted 6 lines
Quoted 1 line
Ok, fair enough. Applied.
Actually, this one ended up getting messy. We've had
multi_v7_defconfigupdates in several branches so this doesn't apply cleanly anywhere.
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
I'll apply it on top of for-next where the various branches are merged. It means we'll have to merge it late. Not a big deal, but please help me remember it in case it for some reason gets lost in the shuffle.
I guess this is the correct time to remind you about this? That said, the patch is in linux-next, so perhaps that counts as not having been lost:-)
(Gah, fumbled the send button).
Yeah, i'm aware of this one, we'll include it with the late/* branches once Linus merges our initial set of stuff.
-Olof