ccache: replace BUILDROOT_CACHE_DIR with BR_CACHE_DIR.
PATCH 1/3 ccache: replace BUILDROOT_CACHE_DIR with BR_CACHE_DIR.
To make the naming consistent (qstripped variant of a config option should be named BR_XXX).
--- Makefile | 4 ++-- package/ccache/ccache.mk | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)
Makefile +2 -2
@@ -316,8 +316,8 @@ TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM ifeq ($(BR2_CCACHE),y) CCACHE:=$(HOST_DIR)/usr/bin/ccache -BUILDROOT_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR)) -export BUILDROOT_CACHE_DIR +BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR)) +export BR_CACHE_DIR HOSTCC := $(CCACHE) $(HOSTCC) HOSTCXX := $(CCACHE) $(HOSTCXX) endif
package/ccache/ccache.mk +3 -3
@@ -22,16 +22,16 @@ CCACHE_LICENSE_FILES = LICENSE.txt GPL-3.0.txt HOST_CCACHE_CONF_OPT += ccache_cv_zlib_1_2_3=no # Patch host-ccache as follows: -# - Use BUILDROOT_CACHE_DIR instead of CCACHE_DIR, because CCACHE_DIR +# - Use BR_CACHE_DIR instead of CCACHE_DIR, because CCACHE_DIR # is already used by autotargets for the ccache package. -# BUILDROOT_CACHE_DIR is exported by Makefile based on config option +# BR_CACHE_DIR is exported by Makefile based on config option # BR2_CCACHE_DIR. # - ccache shouldn't use the compiler binary mtime to detect a change in # the compiler, because in the context of Buildroot, that completely # defeats the purpose of ccache. Of course, that leaves the user # responsible for purging its cache when the compiler changes. define HOST_CCACHE_PATCH_CONFIGURATION - sed -i 's,getenv("CCACHE_DIR"),getenv("BUILDROOT_CACHE_DIR"),' $(@D)/ccache.c + sed -i 's,getenv("CCACHE_DIR"),getenv("BR_CACHE_DIR"),' $(@D)/ccache.c sed -i 's,getenv("CCACHE_COMPILERCHECK"),"none",' $(@D)/ccache.c endef
Signature · 1 line
1.9.rc1
PATCH 2/3 infra: replace BUILDROOT_DL_DIR with BR2_DL_DIR.
To make the naming consistent (all user-visible options should be prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set BUILDROOT_DL_DIR but not BR2_DL_DIR.
--- Config.in | 2 +- Makefile | 7 +++++++ Makefile.legacy | 16 ++++++++++++++++ docs/manual/common-usage.txt | 2 +- docs/manual/download-location.txt | 8 ++++---- package/pkg-download.mk | 9 ++------- 6 files changed, 31 insertions(+), 13 deletions(-)
Config.in +1 -1
@@ -126,7 +126,7 @@ config BR2_DL_DIR default "$(TOPDIR)/dl" help Directory to store all the source files that we need to fetch. - If the Linux shell environment has defined the BUILDROOT_DL_DIR + If the Linux shell environment has defined the BR2_DL_DIR environment variable, then this overrides this configuration item. The default is $(TOPDIR)/dl
Makefile +7 -0
@@ -121,6 +121,13 @@ else $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE)) endif +# To make sure the the environment variable overrides the .config option, +# set this before including .config. +ifneq ($(BR2_DL_DIR),) +DL_DIR := $(BR2_DL_DIR) +endif + + # Need that early, before we scan packages # Avoids doing the $(or...) everytime BR2_GRAPH_OUT := $(or $(GRAPH_OUT),pdf)
Makefile.legacy +16 -0
@@ -13,6 +13,22 @@ $(error "You have legacy configuration in your .config! Please check your config endif # +# Legacy options from 2014.02 +# + +# The BUILDROOT_DL_DIR environment variable was renamed by BR2_DL_DIR. We +# want to detect someone using the old variable, _except_ if also the new +# variable was set. By the time we get here, however, we no longer have +# access to the BR2_DL_DIR environment variable (because it has been overridden +# by the .config inclusion). However, the environment variable (if defined) was +# saved in DL_DIR, so we can use that. +ifneq ($(BUILDROOT_DL_DIR),) +ifneq ($(BUILDROOT_DL_DIR),$(DL_DIR)) +$(error "The BUILDROOT_DL_DIR environment variable was renamed to BR2_DL_DIR.") +endif +endif + +# # Legacy options from 2012.08 #
docs/manual/common-usage.txt +1 -1
@@ -80,7 +80,7 @@ to +make+ or set in the environment: configuration interface, so through the Buildroot +.config+ file; this is the recommended way of setting it. + -* +BUILDROOT_DL_DIR+ to override the directory in which +* +BR2_DL_DIR+ to override the directory in which Buildroot stores/retrieves downloaded files + Note that the Buildroot download directory can also be set from the
docs/manual/download-location.txt +4 -4
@@ -13,14 +13,14 @@ filesystem with exactly the same versions. If you maintain several Buildroot trees, it might be better to have a shared download location. This can be achieved by pointing the -+BUILDROOT_DL_DIR+ environment variable to a directory. If this is ++BR2_DL_DIR+ environment variable to a directory. If this is set, then the value of +BR2_DL_DIR+ in the Buildroot configuration is overridden. The following line should be added to +<~/.bashrc>+. ----------------- - $ export BUILDROOT_DL_DIR <shared download location> + $ export BR2_DL_DIR <shared download location> ----------------- The download location can also be set in the +.config+ file, with the -+BR2_DL_DIR+ option. This value is overridden by the +BUILDROOT_DL_DIR+ -environment variable. ++BR2_DL_DIR+ option. Unlike most options in the .config file, this value +is overridden by the +BR2_DL_DIR+ environment variable.
package/pkg-download.mk +2 -7
@@ -23,13 +23,8 @@ LOCALFILES := $(call qstrip,$(BR2_LOCALFILES)) # external-deps target. DL_MODE=DOWNLOAD -# Override BR2_DL_DIR if shell variable defined -ifneq ($(BUILDROOT_DL_DIR),) -DL_DIR := $(BUILDROOT_DL_DIR) -else -DL_DIR := $(call qstrip,$(BR2_DL_DIR)) -endif - +# DL_DIR may have been set already from the environment +DL_DIR ?= $(call qstrip,$(BR2_DL_DIR)) ifeq ($(DL_DIR),) DL_DIR := $(TOPDIR)/dl endif
Signature · 1 line
1.9.rc1
PATCH 2/3 infra: replace BUILDROOT_DL_DIR with BR2_DL_DIR.
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle (Essensium/Mind) <[email protected]> writes:
To make the naming consistent (all user-visible options should be prefixed
BR2_).An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIRbut notBR2_DL_DIR.
Committed, thanks. Lets hope Thomas' has updated his autobuilder script to also set BR2_DL_DIR.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
In reply to Arnout Vandecappelle (Essensium/Mind)To make the naming consistent (all user-visible options should be prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to make sure that scripts that still use it fail in a predictable way.
--- Makefile | 20 ++++++++++---------- Makefile.legacy | 12 ++++++++++++ docs/manual/customize-rootfs.txt | 4 ++-- docs/manual/debugging-buildroot.txt | 2 +- support/dependencies/dependencies.sh | 10 +++++----- support/kconfig/confdata.c | 2 +- .../patches/01-kconfig-kernel-to-buildroot.patch | 2 +- support/scripts/mkusers | 4 ++-- 8 files changed, 34 insertions(+), 22 deletions(-)
Makefile +10 -10
@@ -152,11 +152,11 @@ LEGAL_LICENSES_TXT_HOST=$(LEGAL_INFO_DIR)/host-licenses.txt LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings LEGAL_REPORT=$(LEGAL_INFO_DIR)/README -BUILDROOT_CONFIG=$(CONFIG_DIR)/.config +BR2_CONFIG=$(CONFIG_DIR)/.config # Pull in the user's configuration file ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),) --include $(BUILDROOT_CONFIG) +-include $(BR2_CONFIG) endif # To put more focus on warnings, be less verbose as default
@@ -331,7 +331,7 @@ endif # Scripts in support/ or post-build scripts may need to reference # these locations, so export them so it is easier to use -export BUILDROOT_CONFIG +export BR2_CONFIG export TARGET_DIR export STAGING_DIR export HOST_DIR
@@ -428,7 +428,7 @@ $(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) % dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \ $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR) -$(BUILD_DIR)/buildroot-config/auto.conf: $(BUILDROOT_CONFIG) +$(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG) $(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig prepare: $(BUILD_DIR)/buildroot-config/auto.conf
@@ -628,7 +628,7 @@ legal-info-prepare: $(LEGAL_INFO_DIR) @$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,HOST) @$(call legal-warning,the Buildroot source code has not been saved) @$(call legal-warning,the toolchain has not been saved) - @cp $(BUILDROOT_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config + @cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \ $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
@@ -685,7 +685,7 @@ COMMON_CONFIG_ENV = \ KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \ KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \ KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \ - BUILDROOT_CONFIG=$(BUILDROOT_CONFIG) \ + BR2_CONFIG=$(BR2_CONFIG) \ BR2_EXTERNAL=$(BR2_EXTERNAL) xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
@@ -726,7 +726,7 @@ allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile @mkdir -p $(BUILD_DIR)/buildroot-config - @grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg + @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg @grep '^config BR2_PACKAGE_' Config.in.legacy | \ while read config pkg; do \ echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
@@ -737,7 +737,7 @@ randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile @mkdir -p $(BUILD_DIR)/buildroot-config - @grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg + @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg @grep '^config BR2_PACKAGE_' Config.in.legacy | \ while read config pkg; do \ echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
@@ -748,7 +748,7 @@ allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile @mkdir -p $(BUILD_DIR)/buildroot-config - @grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg + @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg @$(COMMON_CONFIG_ENV) \ KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \ $< --allnoconfig $(CONFIG_CONFIG_IN)
@@ -820,7 +820,7 @@ endif ifeq ($(O),output) rm -rf $(O) endif - rm -rf $(BUILDROOT_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps + rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps help: @echo 'Cleaning:'
Makefile.legacy +12 -0
@@ -28,6 +28,18 @@ $(error "The BUILDROOT_DL_DIR environment variable was renamed to BR2_DL_DIR.") endif endif +# Similar to above for BUILDROOT_CONFIG, but here we have no .config equivalent. +ifneq ($(BUILDROOT_CONFIG),) +ifneq ($(BUILDROOT_CONFIG),$(BR2_CONFIG)) +$(error "The BUILDROOT_CONFIG environment variable was renamed to BR2_CONFIG.") +endif +endif + +# If a script is using the deprecated BUILDROOT_CONFIG, make sure it fails. +# Add some directories in front just in case someone used dirname on it. +BUILDROOT_CONFIG = /tmp/deprecated/The-BUILDROOT_CONFIG-environment-variable-was-renamed-to-BR2_CONFIG +export BUILDROOT_CONFIG + # # Legacy options from 2012.08 #
docs/manual/customize-rootfs.txt +2 -2
@@ -38,7 +38,7 @@ there are a few ways to customize the resulting target filesystem. files, you should fix that package rather than work around it with some post-build cleanup scripts. You may also use these variables in your post-build script: - - +BUILDROOT_CONFIG+: the path to the Buildroot .config file + - +BR2_CONFIG+: the path to the Buildroot .config file - +HOST_DIR+, +STAGING_DIR+, +TARGET_DIR+: see xref:generic-package-reference[] - +BUILD_DIR+: the directory where packages are extracted and built
@@ -79,7 +79,7 @@ in one of these _post-image scripts_ will require special handling Just like for the _post-build scripts_ mentioned above, you also have access to the following environment variables from your _post-image -scripts_: +BUILDROOT_CONFIG+, +BUILD_DIR+, +HOST_DIR+, +STAGING_DIR+, +scripts_: +BR2_CONFIG+, +BUILD_DIR+, +HOST_DIR+, +STAGING_DIR+, +TARGET_DIR+, +BINARIES_DIR+ and +BASE_DIR+. Additionally, each of the +BR2_ROOTFS_POST_BUILD_SCRIPT+ and
docs/manual/debugging-buildroot.txt +1 -1
@@ -24,7 +24,7 @@ make BR2_INSTRUMENTATION_SCRIPTS="/path/to/my/script1 /path/to/my/script2" That script has access to the following variables: - - +BUILDROOT_CONFIG+: the path to the Buildroot .config file + - +BR2_CONFIG+: the path to the Buildroot .config file - +HOST_DIR+, +STAGING_DIR+, +TARGET_DIR+: see xref:generic-package-reference[] - +BUILD_DIR+: the directory where packages are extracted and built
support/dependencies/dependencies.sh +5 -5
@@ -168,8 +168,8 @@ if test "${missing_progs}" = "yes" ; then exit 1 fi -if grep ^BR2_TOOLCHAIN_BUILDROOT=y $BUILDROOT_CONFIG > /dev/null && \ - grep ^BR2_ENABLE_LOCALE=y $BUILDROOT_CONFIG > /dev/null ; then +if grep ^BR2_TOOLCHAIN_BUILDROOT=y $BR2_CONFIG > /dev/null && \ + grep ^BR2_ENABLE_LOCALE=y $BR2_CONFIG > /dev/null ; then if ! which locale > /dev/null ; then echo echo "You need locale support on your build machine to build a toolchain supporting locales"
@@ -182,7 +182,7 @@ if grep ^BR2_TOOLCHAIN_BUILDROOT=y $BUILDROOT_CONFIG > /dev/null && \ fi fi -if grep -q ^BR2_PACKAGE_CLASSPATH=y $BUILDROOT_CONFIG ; then +if grep -q ^BR2_PACKAGE_CLASSPATH=y $BR2_CONFIG ; then for prog in javac jar; do if ! which $prog > /dev/null ; then echo >&2
@@ -192,7 +192,7 @@ if grep -q ^BR2_PACKAGE_CLASSPATH=y $BUILDROOT_CONFIG ; then done fi -if grep -q ^BR2_HOSTARCH_NEEDS_IA32_LIBS=y $BUILDROOT_CONFIG ; then +if grep -q ^BR2_HOSTARCH_NEEDS_IA32_LIBS=y $BR2_CONFIG ; then if test ! -f /lib/ld-linux.so.2 ; then echo echo "Your Buildroot configuration uses pre-built tools for the x86 architecture,"
@@ -206,7 +206,7 @@ if grep -q ^BR2_HOSTARCH_NEEDS_IA32_LIBS=y $BUILDROOT_CONFIG ; then fi fi -if grep -q ^BR2_HOSTARCH_NEEDS_IA32_COMPILER=y $BUILDROOT_CONFIG ; then +if grep -q ^BR2_HOSTARCH_NEEDS_IA32_COMPILER=y $BR2_CONFIG ; then if ! echo "int main(void) {}" | gcc -m32 -x c - ; then echo echo "Your Buildroot configuration needs a compiler capable of building 32 bits binaries."
support/kconfig/confdata.c +1 -1
@@ -64,7 +64,7 @@ static void conf_message(const char *fmt, ...)const char *conf_get_configname (void ) { -char *name =getenv ("BUILDROOT_CONFIG" ); +char *name =getenv ("BR2_CONFIG" );return name ? name :".config" ; }
support/kconfig/patches/01-kconfig-kernel-to-buildroot.patch +1 -1
@@ -88,7 +88,7 @@ Index: kconfig/confdata.c const char *conf_get_configname(void) { - char *name = getenv("KCONFIG_CONFIG"); -+ char *name = getenv("BUILDROOT_CONFIG"); ++ char *name = getenv("BR2_CONFIG"); return name ? name : ".config"; }
support/scripts/mkusers +2 -2
@@ -39,7 +39,7 @@ GROUP="${TARGET_DIR}/etc/group" # with /etc/group, so any use of gshadow must be conditional. GSHADOW="${TARGET_DIR}/etc/gshadow" -# We can't simply source ${BUILDROOT_CONFIG} as it may contains constructs +# We can't simply source ${BR2_CONFIG} as it may contains constructs # such as: # BR2_DEFCONFIG="$(CONFIG_DIR)/defconfig" # which when sourced from a shell script will eventually try to execute
@@ -48,7 +48,7 @@ GSHADOW="${TARGET_DIR}/etc/gshadow" # So, we have to scan that file instead. Sigh... :-( PASSWD_METHOD="$( sed -r -e '/^BR2_TARGET_GENERIC_PASSWD_METHOD="(.*)"$/!d;' \ -e 's//\1/;' \ - "${BUILDROOT_CONFIG}" \ + "${BR2_CONFIG}" \ )" #----------------------------------------------------------------------------
Signature · 1 line
1.9.rc1
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
----- Mail original -----
Quoted 11 lines
To make the naming consistent (all user-visible options should be prefixed with
BR2_).An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIGbut notBR2_CONFIG.Still export
BUILDROOT_CONFIGbut pointing to some phony value, to make sure that scripts that still use it fail in a predictable way.---
I tested with my script which has the following code
BR2_RASPAUDIO_PAACCESS="$( sed -r -e '/^BR2_RASPAUDIO_PAACCESS="(.*)"$/!d;' \
-e 's//\1/;' \
"${BUILDROOT_CONFIG}" \
)"which is adapted from the mkusers script... and it failed silently.
I am not sure how to deal with the situation. I don't really see a better way, but silently failing in a case where I copied what is done in mainline seems a bad idea...
Regards
Jeremy Rosne
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
Quoted 19 lines · Jeremy Rosen
----- Mail original -----
Quoted 11 lines
To make the naming consistent (all user-visible options should be prefixed with
BR2_).An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIGbut notBR2_CONFIG.Still export
BUILDROOT_CONFIGbut pointing to some phony value, to make sure that scripts that still use it fail in a predictable way.---
I tested with my script which has the following code
Quoted 7 lines
BR2_RASPAUDIO_PAACCESS="$( sed -r -e '/^BR2_RASPAUDIO_PAACCESS="(.*)"$/!d;' \ -e 's//\1/;' \ "${BUILDROOT_CONFIG}" \ )"which is adapted from the mkusers script... and it failed silently.
Really silently? sed should complain on stderr that the file doesn't
exist, but indeed the script will continue with an empty BR2_RASPAUDIO_PAACCESS variable.
Quoted 4 lines
I am not sure how to deal with the situation. I don't really see a better way, but silently failing in a case where I copied what is done in mainline seems a bad idea...
Hm, I also don't see a way out :-(
Regards,
Arnout
Quoted 5 lines
Regards
Jeremy Rosne
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
Quoted 9 lines
Quoted 4 lines
which is adapted from the mkusers script... and it failed silently.
Really silently? sed should complain on stderr that the file doesn't
exist, but indeed the script will continue with an emptyBR2_RASPAUDIO_PAACCESSvariable.
I missed the message in the build log, but indeed, sed did print an
error with the usefull variable content on stderr
so this works as expected and is a case of "this is the best we can do" since we can't proactively check the scripts...
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
oh, and by the way
Quoted 21 lines
Quoted 10 lines
Quoted 4 lines
which is adapted from the mkusers script... and it failed silently.
Really silently? sed should complain on stderr that the file doesn't
exist, but indeed the script will continue with an emptyBR2_RASPAUDIO_PAACCESSvariable.I missed the message in the build log, but indeed, sed did print an
error with the usefull variable content on stderrso this works as expected and is a case of "this is the best we can do" since we can't proactively check the scripts...
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 3/3 infra: replace BUILDROOT_CONFIG with BR2_CONFIG.
In reply to Arnout Vandecappelle (Essensium/Mind)Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle (Essensium/Mind) <[email protected]> writes:
To make the naming consistent (all user-visible options should be prefixed with
BR2_).
Quoted 7 lines
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIGbut notBR2_CONFIG.Still export
BUILDROOT_CONFIGbut pointing to some phony value, to make sure that scripts that still use it fail in a predictable way.
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/3 ccache: replace BUILDROOT_CACHE_DIR with BR_CACHE_DIR.
In reply to Arnout Vandecappelle (Essensium/Mind)Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle (Essensium/Mind) <[email protected]> writes:
To make the naming consistent (qstripped variant of a config option should be named
BR_XXX).
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard