ARM: imx6: fix wrong fec clk
PATCH 1/1 ARM: imx6: fix wrong fec clk
From: Markus Niebel <[email protected]>
imx_get_fecclk() returns enet_ref instead of ipg. Since the clock is used to calculate the prescaler for the MDIO interface wrong values can be calculated.
Tested on a custom MX6S board with 100MBit interface
Signed-off-by Markus Niebel <[email protected]>
--- arch/arm/cpu/armv7/mx6/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv7/mx6/clock.c +1 -1
@@ -409,7 +409,7 @@ u32 imx_get_uartclk(void)u32 imx_get_fecclk (void ) { -return decode_pll (PLL_ENET ,MXC_HCLK ); +return mxc_get_clock (MXC_IPG_CLK ); }int enable_sata_clock (void )
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: imx6: fix wrong fec clk
Quoted 11 lines · Markus Niebel
From: Markus Niebel <[email protected]>
imx_get_fecclk()returnsenet_refinstead of ipg. Since the clock is used to calculate the prescaler for the MDIO interface wrong values can be calculated.Tested on a custom MX6S board with 100MBit interface
Signed-off-by Markus Niebel <[email protected]>--- arch/arm/cpu/armv7/mx6/clock.c | 2 +-
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================