drm/tegra: Add guard to avoid double disable/enable of RGB outputs
PATCH 1/1 drm/tegra: Add guard to avoid double disable/enable of RGB outputs
Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering).
--- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/gpu/drm/tegra/rgb.c +11 -0
@@ -15,6 +15,7 @@struct tegra_rgb {struct tegra_output output;struct tegra_dc *dc; +bool enabled;struct clk *clk_parent;struct clk *clk;
@@ -89,6 +90,9 @@ static int tegra_output_rgb_enable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (rgb->enabled) +return 0 ; +tegra_dc_write_regs (rgb->dc, rgb_enable,ARRAY_SIZE (rgb_enable)); value =DE_SELECT_ACTIVE |DE_CONTROL_NORMAL ;
@@ -122,6 +126,8 @@ static int tegra_output_rgb_enable(struct tegra_output *output)tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ <<8 ,DC_CMD_STATE_CONTROL );tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ ,DC_CMD_STATE_CONTROL ); + rgb->enabled = true; +return 0 ; }
@@ -130,6 +136,9 @@ static int tegra_output_rgb_disable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (!rgb->enabled) +return 0 ; + value =tegra_dc_readl (rgb->dc,DC_CMD_DISPLAY_POWER_CONTROL ); value &= ~(PW0_ENABLE |PW1_ENABLE |PW2_ENABLE |PW3_ENABLE |PW4_ENABLE |PM0_ENABLE |PM1_ENABLE );
@@ -144,6 +153,8 @@ static int tegra_output_rgb_disable(struct tegra_output *output)tegra_dc_write_regs (rgb->dc, rgb_disable,ARRAY_SIZE (rgb_disable)); + rgb->enabled = false; +return 0 ; }
Signature · 1 line
1.8.5.3
Quoted 51 lines · Dmitry Osipenko
Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering).
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)drivers/gpu/drm/tegra/rgb.c +9
-0@@ -15,6 +15,7 @@struct tegra_rgb {struct tegra_output output;struct tegra_dc *dc; +bool enabled;struct clk *clk_parent;struct clk *clk;@@ -89,6 +90,9 @@ static int tegra_output_rgb_enable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (rgb->enabled) +return 0 ; +tegra_dc_write_regs (rgb->dc, rgb_enable,ARRAY_SIZE (rgb_enable)); value =DE_SELECT_ACTIVE |DE_CONTROL_NORMAL ;@@ -122,6 +126,8 @@ static int tegra_output_rgb_enable(struct tegra_output *output)tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ <<8 ,DC_CMD_STATE_CONTROL );tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ ,DC_CMD_STATE_CONTROL ); + rgb->enabled = true; +return 0 ; }@@ -130,6 +136,9 @@ static int tegra_output_rgb_disable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (!rgb->enabled) +return 0 ; + value =tegra_dc_readl (rgb->dc,DC_CMD_DISPLAY_POWER_CONTROL ); value &= ~(PW0_ENABLE |PW1_ENABLE |PW2_ENABLE |PW3_ENABLE |PW4_ENABLE |PM0_ENABLE |PM1_ENABLE );
drivers/gpu/drm/tegra/rgb.c static int tegra_output_rgb_disable(struct tegra_output *output) · line 160
Quoted 8 lines
drivers/gpu/drm/tegra/rgb.c +2
-0@@ -144,6 +153,8 @@ static int tegra_output_rgb_disable(struct tegra_output *output)tegra_dc_write_regs (rgb->dc, rgb_disable,ARRAY_SIZE (rgb_disable)); + rgb->enabled = false; +return 0 ; }
Wouldn't it make more sense to make "enabled" and int that counts how many times tegra_output_rgb_enable has been called? That way you can have tegra_output_rgb_disable only really disable the display once the same amount of disables have been performed...
11.02.2014 23:13, Erik Faye-Lund пишет:
Quoted 55 lines · Dmitry Osipenko
Quoted 54 lines
Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering).
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)drivers/gpu/drm/tegra/rgb.c +9
-0@@ -15,6 +15,7 @@struct tegra_rgb {struct tegra_output output;struct tegra_dc *dc; +bool enabled;struct clk *clk_parent;struct clk *clk;@@ -89,6 +90,9 @@ static int tegra_output_rgb_enable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (rgb->enabled) +return 0 ; +tegra_dc_write_regs (rgb->dc, rgb_enable,ARRAY_SIZE (rgb_enable)); value =DE_SELECT_ACTIVE |DE_CONTROL_NORMAL ;@@ -122,6 +126,8 @@ static int tegra_output_rgb_enable(struct tegra_output *output)tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ <<8 ,DC_CMD_STATE_CONTROL );tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ ,DC_CMD_STATE_CONTROL ); + rgb->enabled = true; +return 0 ; }@@ -130,6 +136,9 @@ static int tegra_output_rgb_disable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (!rgb->enabled) +return 0 ; + value =tegra_dc_readl (rgb->dc,DC_CMD_DISPLAY_POWER_CONTROL ); value &= ~(PW0_ENABLE |PW1_ENABLE |PW2_ENABLE |PW3_ENABLE |PW4_ENABLE |PM0_ENABLE |PM1_ENABLE );@@ -144,6 +153,8 @@ static int tegra_output_rgb_disable(struct tegra_output *output)tegra_dc_write_regs (rgb->dc, rgb_disable,ARRAY_SIZE (rgb_disable));
Quoted 11 lines
drivers/gpu/drm/tegra/rgb.c static int tegra_output_rgb_disable(struct tegra_output *output) · line 160
Quoted 5 lines
drivers/gpu/drm/tegra/rgb.c +2
-0+ rgb->enabled = false; +return 0 ; }Wouldn't it make more sense to make "enabled" and int that counts how many times
tegra_output_rgb_enablehas been called? That way you can havetegra_output_rgb_disableonly really disable the display once the same amount of disables have been performed...
RGB is a part of DC, i.e. one per DC. tegra_output_rgb_enable() would be called for each individual DC, so it doesn't make any sense. Besides, I doubt tegra device with two panels ever existed or will be :)
Quoted 55 lines · Erik Faye-Lund
Quoted 54 lines · Dmitry Osipenko
Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering).
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)drivers/gpu/drm/tegra/rgb.c +9
-0@@ -15,6 +15,7 @@struct tegra_rgb {struct tegra_output output;struct tegra_dc *dc; +bool enabled;struct clk *clk_parent;struct clk *clk;@@ -89,6 +90,9 @@ static int tegra_output_rgb_enable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (rgb->enabled) +return 0 ; +tegra_dc_write_regs (rgb->dc, rgb_enable,ARRAY_SIZE (rgb_enable)); value =DE_SELECT_ACTIVE |DE_CONTROL_NORMAL ;@@ -122,6 +126,8 @@ static int tegra_output_rgb_enable(struct tegra_output *output)tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ <<8 ,DC_CMD_STATE_CONTROL );tegra_dc_writel (rgb->dc,GENERAL_ACT_REQ ,DC_CMD_STATE_CONTROL ); + rgb->enabled = true; +return 0 ; }@@ -130,6 +136,9 @@ static int tegra_output_rgb_disable(struct tegra_output *output)struct tegra_rgb *rgb =to_rgb (output);unsigned long value; +if (!rgb->enabled) +return 0 ; + value =tegra_dc_readl (rgb->dc,DC_CMD_DISPLAY_POWER_CONTROL ); value &= ~(PW0_ENABLE |PW1_ENABLE |PW2_ENABLE |PW3_ENABLE |PW4_ENABLE |PM0_ENABLE |PM1_ENABLE );@@ -144,6 +153,8 @@ static int tegra_output_rgb_disable(struct tegra_output *output)tegra_dc_write_regs (rgb->dc, rgb_disable,ARRAY_SIZE (rgb_disable));
Quoted 10 lines
drivers/gpu/drm/tegra/rgb.c static int tegra_output_rgb_disable(struct tegra_output *output) · line 160
Quoted 5 lines
drivers/gpu/drm/tegra/rgb.c +2
-0+ rgb->enabled = false; +return 0 ; }Wouldn't it make more sense to make "enabled" and int that counts how many times
tegra_output_rgb_enablehas been called? That way you can havetegra_output_rgb_disableonly really disable the display once the same amount of disables have been performed...
I don't think that will work. Calls to tegra_output_rgb_enable/disable() and the .enable/disable for any other outputs aren't guaranteed to be balanced. Therefore reference counting the enables and disables will break things.
Thinking about it, maybe the current interface to outputs isn't the best solution. It's simple and with the guards in place it works pretty well. Perhaps if I can find some spare time I'll investigate whether something a little cleaner can be done.
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Thierry Reding
AppliedQuoted 8 lines · Dmitry Osipenko
Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering).
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
Applied, thanks!
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel