Skip to contentSkip to conversation

a package infrastructure for Perl/CPAN modules

PATCH Superseded Francois Perrad 3 participants 14 messages Feb 12, 2014 – Feb 13, 2014

v9 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v9 cover a package infrastructure for Perl/CPAN modules

delta V8 vs V9 :
- scancpan
+ back to fatpack
+ use 5.018;

delta V7 vs V8 :
- typo and minor improvements

delta V6 vs V7 :
- global
+ substitute 'perl_5' by 'Artistic or GPLv1+'
- scancpan
+ remove 'NO ABSTRACT'
+ check Module::CoreList::is_core with the target Perl version
+ add packages Module-CoreList and MetaCPAN-API-Tiny instead of use Fatpack
+ add GPL

delta V5 vs V6 :
- export PERL5LIB
- rename PKG_PERL_ARCHNAME to PERL_ARCHNAME
- remove $(2)_*_OPT (with empty default value)
- remove PERL_INSTALL_TARGET_GOALS

Francois Perrad (6):
pkg-perl: new infrastructure
scancpan: a new script
host-perl-xml-parser: rename and refactor with perl infrastructure
host-perl-module-build: new package
manual: adding packages perl
perl: remove PERL_INSTALL_TARGET_GOALS

 Config.in                                        |   11 +
 docs/manual/adding-packages-perl.txt             |  110 ++++
 docs/manual/adding-packages.txt                  |    2 +
 package/Config.in                                |    1 -
 package/Makefile.in                              |    4 +-
 package/intltool/intltool.mk                     |    2 +-
 package/libxml-parser-perl/Config.in             |   10 -
 package/libxml-parser-perl/libxml-parser-perl.mk |   35 --
 package/metacity/metacity.mk                     |    2 +-
 package/perl-module-build/perl-module-build.mk   |   12 +
 package/perl-xml-parser/perl-xml-parser.mk       |   17 +
 package/perl/perl.mk                             |    4 +-
 package/pkg-perl.mk                              |  181 ++++++
 support/scripts/scancpan                         |  718 ++++++++++++++++++++++
 14 files changed, 1057 insertions(+), 52 deletions(-)
 create mode 100644 docs/manual/adding-packages-perl.txt
 delete mode 100644 package/libxml-parser-perl/Config.in
 delete mode 100644 package/libxml-parser-perl/libxml-parser-perl.mk
 create mode 100644 package/perl-module-build/perl-module-build.mk
 create mode 100644 package/perl-xml-parser/perl-xml-parser.mk
 create mode 100644 package/pkg-perl.mk
 create mode 100755 support/scripts/scancpan
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v9 1/6 pkg-perl: new infrastructure

---
 Config.in           |   11 ++++
 package/Makefile.in |    4 +-
 package/pkg-perl.mk |  181 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 195 insertions(+), 1 deletion(-)
 create mode 100644 package/pkg-perl.mk
Config.in +11 -0
index bcfefc7..c0b44d7 100644
@@ -225,6 +225,17 @@ config BR2_LUAROCKS_MIRROR
 
 	  See http://luarocks.org
 
+config BR2_CPAN_MIRROR
+	string "CPAN mirror (Perl packages)"
+	default "http://search.cpan.org/CPAN"
+	help
+	  CPAN (Comprehensive Perl Archive Network) is a repository
+	  of Perl packages. It has multiple software mirrors scattered
+	  around the world. This option allows you to select a mirror.
+
+	  The list of mirrors is available at:
+	  http://search.cpan.org/mirror
+
 endmenu
 
 config BR2_JLEVEL
package/Makefile.in +3 -1
index eea7043..454f614 100644
@@ -206,7 +206,8 @@ HOST_PATH=$(HOST_DIR)/bin:$(HOST_DIR)/usr/bin:$(PATH)
 HOSTCC_VERSION:=$(shell $(HOSTCC_NOCCACHE) --version | \
 	sed -n 's/^.* \([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)[ ]*.*$$/\1\2\3/p')
 
-export PERL5LIB := $(HOST_DIR)/usr/lib/perl
+HOST_PERL_ARCHNAME := $(shell perl -MConfig -e "print Config->{archname}")
+export PERL5LIB := $(HOST_DIR)/usr/lib/perl5/$(HOST_PERL_ARCHNAME):$(HOST_DIR)/usr/lib/perl5
 
 TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \
 		AR="$(TARGET_AR)" \
@@ -359,5 +360,6 @@ include package/pkg-download.mk
 include package/pkg-autotools.mk
 include package/pkg-cmake.mk
 include package/pkg-luarocks.mk
+include package/pkg-perl.mk
 include package/pkg-python.mk
 include package/pkg-generic.mk
package/pkg-perl.mk new file +181 -0

181 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v9 2/6 scancpan: a new script

In reply to Francois Perrad

which creates Perl/CPAN package files

---
 support/scripts/scancpan |  718 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 718 insertions(+)
 create mode 100755 support/scripts/scancpan
support/scripts/scancpan new file +718 -0
new file mode 100755
index 0000000..13a13ba
@@ -0,0 +1,718 @@
+#!/usr/bin/env perl
+
+# This chunk of stuff was generated by App::FatPacker. To find the original
+# file's code, look for the end of this BEGIN block or the string 'FATPACK'
+BEGIN {
+my %fatpacked;
+
+$fatpacked{"MetaCPAN/API/Tiny.pm"} = <<'METACPAN_API_TINY';
+  package MetaCPAN::API::Tiny;
+  {
+    $MetaCPAN::API::Tiny::VERSION = '1.131730';
+  }
+  use strict;
+  use warnings;
+  # ABSTRACT: A Tiny API client for MetaCPAN
+  
+  use Carp;
+  use JSON::PP 'encode_json', 'decode_json';
+  use HTTP::Tiny;
+  
+  
+  sub new {
+      my ($class, @args) = @_;
+  
+      $#_ % 2 == 0
+          or croak 'Arguments must be provided as name/value pairs';
+      
+      my %params = @args;
+  
+      die 'ua_args must be an array reference'
+          if $params{ua_args} && ref($params{ua_args}) ne 'ARRAY';
+  
+      my $self = +{
+          base_url => $params{base_url} || 'http://api.metacpan.org/v0',
+          ua => $params{ua} || HTTP::Tiny->new(
+              $params{ua_args}
+                  ? @{$params{ua_args}}
+                  : (agent => 'MetaCPAN::API::Tiny/'
+                      . ($MetaCPAN::API::VERSION || 'xx'))),
+      };
+      
+      return bless($self, $class);
+  }
+  
+  sub _build_extra_params {
+      my $self = shift;
+  
+      @_ % 2 == 0
+          or croak 'Incorrect number of params, must be key/value';
+  
+      my %extra = @_;
+      my $ua = $self->{ua};
+  
+      foreach my $key (keys %extra)
+      {
+          # The implementation in HTTP::Tiny uses + instead of %20, fix that
+          $extra{$key} = $ua->_uri_escape($extra{$key});
+          $extra{$key} =~ s/\+/%20/g;
+      }
+  
+      my $params = join '&', map { "$_=" . $extra{$_} } sort keys %extra;
+  
+      return $params;
+  }
+  
+  
+  # /source/{author}/{release}/{path}
+  sub source {
+      my $self  = shift;
+      my %opts  = @_ ? @_ : ();
+      my $url   = '';
+      my $error = "Provide 'author' and 'release' and 'path'";
+  
+      %opts or croak $error;
+  
+      if (
+          defined ( my $author  = $opts{'author'}  ) &&
+          defined ( my $release = $opts{'release'} ) &&
+          defined ( my $path    = $opts{'path'}    )
+        ) {
+          $url = "source/$author/$release/$path";
+      } else {
+          croak $error;
+      }
+  
+      $url = $self->{base_url} . "/$url";
+      
+      my $result = $self->{ua}->get($url);
+      $result->{'success'}
+          or croak "Failed to fetch '$url': " . $result->{'reason'};
+  
+      return $result->{'content'};
+  }
+  
+  
+  # /release/{distribution}
+  # /release/{author}/{release}
+  sub release {
+      my $self  = shift;
+      my %opts  = @_ ? @_ : ();
+      my $url   = '';
+      my $error = "Either provide 'distribution', or 'author' and 'release', " .
+                  "or 'search'";
+  
+      %opts or croak $error;
+  
+      my %extra_opts = ();
+  
+      if ( defined ( my $dist = $opts{'distribution'} ) ) {
+          $url = "release/$dist";
+      } elsif (
+          defined ( my $author  = $opts{'author'}  ) &&
+          defined ( my $release = $opts{'release'} )
+        ) {
+          $url = "release/$author/$release";
+      } elsif ( defined ( my $search_opts = $opts{'search'} ) ) {
+          ref $search_opts && ref $search_opts eq 'HASH'
+              or croak $error;
+  
+          %extra_opts = %{$search_opts};
+          $url        = 'release/_search';
+      } else {
+          croak $error;
+      }
+  
+      return $self->fetch( $url, %extra_opts );
+  }
+  
+  
+  # /pod/{module}
+  # /pod/{author}/{release}/{path}
+  sub pod {
+      my $self  = shift;
+      my %opts  = @_ ? @_ : ();
+      my $url   = '';
+      my $error = "Either provide 'module' or 'author and 'release' and 'path'";
+  
+      %opts or croak $error;
+  
+      if ( defined ( my $module = $opts{'module'} ) ) {
+          $url = "pod/$module";
+      } elsif (
+          defined ( my $author  = $opts{'author'}  ) &&
+          defined ( my $release = $opts{'release'} ) &&
+          defined ( my $path    = $opts{'path'}    )
+        ) {
+          $url = "pod/$author/$release/$path";
+      } else {
+          croak $error;
+      }
+  
+      # check content-type
+      my %extra = ();
+      if ( defined ( my $type = $opts{'content-type'} ) ) {
+          $type =~ m{^ text/ (?: html|plain|x-pod|x-markdown ) $}x
+              or croak 'Incorrect content-type provided';
+  
+          $extra{headers}{'content-type'} = $type;
+      }
+  
+      $url = $self->{base_url}. "/$url";
+      
+      my $result = $self->{ua}->get( $url, \%extra );
+      $result->{'success'}
+          or croak "Failed to fetch '$url': " . $result->{'reason'};
+  
+      return $result->{'content'};
+  }
+  
+  
+  # /module/{module}
+  sub module {
+      my $self = shift;
+      my $name = shift;
+  
+      $name or croak 'Please provide a module name';
+  
+      return $self->fetch("module/$name");
+  }
+  
+  
+  # file() is a synonym of module
+  sub file { goto &module }
+  
+  
+  # /author/{author}
+  sub author {
+      my $self = shift;
+      my ( $pause_id, $url, %extra_opts );
+  
+      if ( @_ == 1 ) {
+          $url = 'author/' . shift;
+      } elsif ( @_ == 2 ) {
+          my %opts = @_;
+  
+          if ( defined $opts{'pauseid'} ) {
+              $url = "author/" . $opts{'pauseid'};
+          } elsif ( defined $opts{'search'} ) {
+              my $search_opts = $opts{'search'};
+  
+              ref $search_opts && ref $search_opts eq 'HASH'
+                  or croak "'search' key must be hashref";
+  
+              %extra_opts = %{$search_opts};
+              $url        = 'author/_search';
+          } else {
+              croak 'Unknown option given';
+          }
+      } else {
+          croak 'Please provide an author PAUSEID or a "search"';
+      }
+  
+      return $self->fetch( $url, %extra_opts );
+  }
+  
+  
+  
+  sub fetch {
+      my $self    = shift;
+      my $url     = shift;
+      my $extra   = $self->_build_extra_params(@_);
+      my $base    = $self->{base_url};
+      my $req_url = $extra ? "$base/$url?$extra" : "$base/$url";
+      
+      my $result  = $self->{ua}->get($req_url);
+      return $self->_decode_result( $result, $req_url );
+  }
+  
+  
+  sub post {
+      my $self  = shift;
+      my $url   = shift;
+      my $query = shift;
+      my $base  = $self->{base_url};
+  
+      defined $url
+          or croak 'First argument of URL must be provided';
+  
+      ref $query and ref $query eq 'HASH'
+          or croak 'Second argument of query hashref must be provided';
+  
+      my $query_json = encode_json( $query );
+      my $result     = $self->{ua}->request(
+          'POST',
+          "$base/$url",
+          {
+              headers => { 'Content-Type' => 'application/json' },
+              content => $query_json,
+          }
+      );
+  
+      return $self->_decode_result( $result, $url, $query_json );
+  }
+  
+  sub _decode_result {
+      my $self = shift;
+      my ( $result, $url, $original ) = @_;
+      my $decoded_result;
+  
+      ref $result and ref $result eq 'HASH'
+          or croak 'First argument must be hashref';
+  
+      defined $url
+          or croak 'Second argument of a URL must be provided';
+  
+      if ( defined ( my $success = $result->{'success'} ) ) {
+          my $reason = $result->{'reason'} || '';
+          $reason .= ( defined $original ? " (request: $original)" : '' );
+  
+          $success or croak "Failed to fetch '$url': $reason";
+      } else {
+          croak 'Missing success in return value';
+      }
+  
+      defined ( my $content = $result->{'content'} )
+          or croak 'Missing content in return value';
+  
+      eval { $decoded_result = decode_json $content; 1 }
+      or do { croak "Couldn't decode '$content': $@" };
+  
+      return $decoded_result;
+  }
+  
+  1;
+  
+  __END__
+  
+  =pod
+  
+  =head1 NAME
+  
+  MetaCPAN::API::Tiny - A Tiny API client for MetaCPAN
+  
+  =head1 VERSION
+  
+  version 1.131730
+  
+  =head1 DESCRIPTION
+  
+  This is the Tiny version of L<MetaCPAN::API>. It implements a compatible API
+  with a few notable exceptions:
+  
+  =over 4
+  
+  =item Attributes are direct hash access
+  
+  The attributes defined using Mo(o|u)se are now accessed via the blessed hash
+  directly. There are no accessors defined to access this elements.
+  
+  =item Exception handling
+  
+  Instead of using Try::Tiny, raw evals are used. This could potentially cause
+  issues, so just be aware.
+  
+  =item Testing
+  
+  Test::Fatal was replaced with an eval implementation of exception().
+  Test::TinyMocker usage is retained, but may be absorbed since it is pure perl
+  
+  =back
+  
+  =head1 CLASS_METHODS
+  
+  =head2 new
+  
+  new is the constructor for MetaCPAN::API::Tiny. In the non-tiny version of this
+  module, this is provided via Any::Moose built from the attributes defined. In
+  the tiny version, we define our own constructor. It takes the same arguments
+  and provides similar checks to MetaCPAN::API with regards to arguments passed.
+  
+  =head1 PUBLIC_METHODS
+  
+  =head2 source
+  
+      my $source = $mcpan->source(
+          author  => 'DOY',
+          release => 'Moose-2.0201',
+          path    => 'lib/Moose.pm',
+      );
+  
+  Searches MetaCPAN for a module or a specific release and returns the plain source.
+  
+  =head2 release
+  
+      my $result = $mcpan->release( distribution => 'Moose' );
+  
+      # or
+      my $result = $mcpan->release( author => 'DOY', release => 'Moose-2.0001' );
+  
+  Searches MetaCPAN for a dist.
+  
+  You can do complex searches using 'search' parameter:
+  
+      # example lifted from MetaCPAN docs
+      my $result = $mcpan->release(
+          search => {
+              author => "OALDERS AND ",
+              filter => "status:latest",
+              fields => "name",
+              size   => 1,
+          },
+      );
+  
+  =head2 pod
+  
+      my $result = $mcpan->pod( module => 'Moose' );
+  
+      # or
+      my $result = $mcpan->pod(
+          author  => 'DOY',
+          release => 'Moose-2.0201',
+          path    => 'lib/Moose.pm',
+      );
+  
+  Searches MetaCPAN for a module or a specific release and returns the POD.
+  
+  =head2 module
+  
+      my $result = $mcpan->module('MetaCPAN::API');
+  
+  Searches MetaCPAN and returns a module's ".pm" file.
+  
+  =head2 file
+  
+  A synonym of L</module>
+  
+  =head2 author
+  
+      my $result1 = $mcpan->author('XSAWYERX');
+      my $result2 = $mcpan->author( pauseid => 'XSAWYERX' );
+  
+  Searches MetaCPAN for a specific author.
+  
+  You can do complex searches using 'search' parameter:
+  
+      # example lifted from MetaCPAN docs
+      my $result = $mcpan->author(
+          search => {
+              q    => 'profile.name:twitter',
+              size => 1,
+          },
+      );
+  
+  =head2 fetch
+  
+      my $result = $mcpan->fetch('/release/distribution/Moose');
+  
+      # with parameters
+      my $more = $mcpan->fetch(
+          '/release/distribution/Moose',
+          param => 'value',
+      );
+  
+  This is a helper method for API implementations. It fetches a path from MetaCPAN, decodes the JSON from the content variable and returns it.
+  
+  You don't really need to use it, but you can in case you want to write your own extension implementation to MetaCPAN::API.
+  
+  It accepts an additional hash as "GET" parameters.
+  
+  =head2 post
+  
+      # /release&content={"query":{"match_all":{}},"filter":{"prefix":{"archive":"Cache-Cache-1.06"}}}
+      my $result = $mcpan->post(
+          'release',
+          {   
+              query  => { match_all => {} },
+              filter => { prefix => { archive => 'Cache-Cache-1.06' } },
+          },
+      );
+  
+  The POST equivalent of the "fetch()" method. It gets the path and JSON request.
+  
+  =head1 THANKS
+  
+  Overall the tests and code were ripped directly from MetaCPAN::API and
+  tiny-fied. A big thanks to Sawyer X for writing the original module.
+  
+  =head1 AUTHOR
+  
+  Nicholas R. Perez <[email protected]>
+  
+  =head1 COPYRIGHT AND LICENSE
+  
+  This software is copyright (c) 2013 by Nicholas R. Perez <[email protected]>.
+  
+  This is free software; you can redistribute it and/or modify it under
+  the same terms as the Perl 5 programming language system itself.
+  
+  =cut
+METACPAN_API_TINY
+
+s/^  //mg for values %fatpacked;
+
+unshift @INC, sub {
+  if (my $fat = $fatpacked{$_[1]}) {
+    if ($] < 5.008) {
+      return sub {
+        return 0 unless length $fat;
+        $fat =~ s/^([^\n]*\n?)//;
+        $_ = $1;
+        return 1;
+      };
+    }
+    open my $fh, '<', \$fat
+      or die "FatPacker error loading $_[1] (could be a perl installation issue?)";
+    return $fh;
+  }
+  return
+};
+
+} # END OF FATPACK CODE
+
+
+use 5.018;      # same major version as target perl
+use strict;
+use warnings;
+use Fatal qw(open close);
+
+use Getopt::Long;
+use Pod::Usage;
+use File::Basename;
+use Module::CoreList;
+use MetaCPAN::API::Tiny;
+
+my ($help, $man, $quiet, $force, $recommend);
+GetOptions( 'help|?' => \$help,
+            'man' => \$man,
+            'quiet|q' => \$quiet,
+            'force|f' => \$force,
+            'recommend' => \$recommend
+) or pod2usage(-exitval => 1);
+pod2usage(-exitval => 0) if $help;
+pod2usage(-exitval => 0, -verbose => 2) if $man;
+pod2usage(-exitval => 1) if scalar @ARGV == 0;
+
+my %dist;
+my %deps_build;
+my %deps_runtime;
+my $mcpan = MetaCPAN::API::Tiny->new();
+
+sub fetch {
+    my $name = shift;
+    unless ($dist{$name}) {
+        say qq{fetch ${name}} unless $quiet;
+        my $result = $mcpan->release( distribution => $name );
+        $dist{$name} = $result;
+        my @deps_build = ();
+        my @deps_runtime = ();
+        my $mb;
+        foreach my $dep (@{$result->{dependency}}) {
+            my $modname = ${$dep}{module};
+            $mb = 1 if $modname eq q{Module::Build};
+            next if $modname eq q{perl};
+            next if $modname =~ m|^Alien|;
+            next if $modname =~ m|^Win32|;
+            next if Module::CoreList::first_release( $modname );
+            next if ${$dep}{phase} eq q{develop};
+            next if ${$dep}{phase} eq q{test};
+            next if !$recommend && ${$dep}{relationship} ne q{requires};
+            my $distname = $mcpan->module( $modname )->{distribution};
+            if (${$dep}{phase} eq q{runtime}) {
+                push @deps_runtime, $distname;
+            }
+            else { # configure, build
+                push @deps_build, $distname;
+            }
+            fetch( $distname );
+        }
+        unshift @deps_build, q{Module-Build} if $mb;
+        $deps_build{$name} = \@deps_build;
+        $deps_runtime{$name} = \@deps_runtime;
+    }
+    return;
+}
+
+foreach my $distname (@ARGV) {
+    fetch( $distname );
+}
+say scalar keys %dist, q{ packages fetched.} unless $quiet;
+
+sub fsname {
+    my $name = shift;
+    return q{perl-} . lc $name;
+}
+
+sub brname {
+    my $name = shift;
+    $name =~ s|-|_|g;
+    return uc $name;
+}
+
+while (my ($distname, $dist) = each %dist) {
+    my $fsname = fsname( $distname );
+    my $dirname = q{package/} . $fsname;
+    my $cfgname = $dirname . q{/Config.in};
+    my $mkname = $dirname . q{/} . $fsname . q{.mk};
+    my $brname = brname( $fsname );
+    mkdir $dirname unless -d $dirname;
+    if ($force || !-f $cfgname) {
+        my $abstract = $dist->{abstract};
+        say qq{write ${cfgname}} unless $quiet;
+        open my $fh, q{>}, $cfgname;
+        say {$fh} qq{config BR2_PACKAGE_${brname}};
+        say {$fh} qq{\tbool "${fsname}"};
+        foreach my $dep (@{$deps_runtime{$distname}}) {
+            my $brdep = brname( fsname( $dep ) );
+            say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
+        }
+        say {$fh} qq{\thelp} if $abstract;
+        say {$fh} qq{\t  ${abstract}} if $abstract;
+        say {$fh} qq{};
+        close $fh;
+    }
+    if ($force || !-f $mkname) {
+        my $version = $dist->{version};
+        my $site = dirname( $dist->{download_url} );
+        my($scheme, $auth, $path) = $dist->{download_url} =~ m|(?:([^:/?#]+):)?(?://([^/?#]*))?([^?#]*)|;
+        my($filename, $directories, $suffix) = fileparse( $path, q{tar.gz}, q{tgz} );
+        my $dependencies = join q{ }, map( { q{host-} . fsname( $_ ); } @{$deps_build{$distname}} ),
+                                      map( { fsname( $_ ); } @{$deps_runtime{$distname}} );
+        my $host_dependencies = join q{ }, map { q{host-} . fsname( $_ ); } @{$deps_build{$distname}},
+                                                                            @{$deps_runtime{$distname}};
+        my $license = ref $dist->{license} eq 'ARRAY'
+                    ? join q{ or }, @{$dist->{license}}
+                    : $dist->{license};
+        $license = q{Artistic or GPLv1+} if $license eq q{perl_5};
+        say qq{write ${mkname}} unless $quiet;
+        open my $fh, q{>}, $mkname;
+        say {$fh} qq{################################################################################};
+        say {$fh} qq{#};
+        say {$fh} qq{# ${fsname}};
+        say {$fh} qq{#};
+        say {$fh} qq{################################################################################};
+        say {$fh} qq{};
+        say {$fh} qq{${brname}_VERSION = ${version}};
+        say {$fh} qq{${brname}_SOURCE = ${distname}-\$(${brname}_VERSION).${suffix}};
+        say {$fh} qq{${brname}_SITE = \$(BR2_CPAN_MIRROR)${directories}};
+        say {$fh} qq{${brname}_DEPENDENCIES = perl ${dependencies}};
+        say {$fh} qq{#HOST_${brname}_DEPENDENCIES = ${host_dependencies}};
+        say {$fh} qq{${brname}_LICENSE = ${license}} if $license && $license ne q{unknown};
+        say {$fh} qq{};
+        say {$fh} qq{\$(eval \$(perl-package))};
+        say {$fh} qq{#\$(eval \$(host-perl-package))};
+        close $fh;
+    }
+}
+
+my %pkg;
+my $cfgname = q{package/Config.in};
+if (-f $cfgname) {
+    open my $fh, q{<}, $cfgname;
+    while (<$fh>) {
+        chomp;
+        $pkg{$_} = 1 if m|package/perl-|;
+    }
+    close $fh;
+}
+
+foreach my $distname (sort keys %dist) {
+    my $fsname = fsname( $distname );
+    $pkg{qq{source "package/${fsname}/Config.in"}} = 1;
+}
+
+say qq{${cfgname} must contain the following lines:};
+say join qq{\n}, sort keys %pkg;
+
+__END__
+
+=head1 NAME
+
+support/scripts/scancpan Try-Tiny Moo
+
+=head1 SYNOPSIS
+
+curl -kL http://install.perlbrew.pl | bash
+
+perlbrew install perl-5.18.2
+
+supports/scripts/scancpan [options] [distname ...]
+
+ Options:
+   -help
+   -man
+   -quiet
+   -force
+   -recommend
+
+=head1 OPTIONS
+
+=over 8
+
+=item B<-help>
+
+Prints a brief help message and exits.
+
+=item B<-man>
+
+Prints the manual page and exits.
+
+=item B<-quiet>
+
+Executes without output
+
+=item B<-force>
+
+Forces the overwriting of existing files.
+
+=item B<-recommend>
+
+Adds I<recommended> dependencies.
+
+=back
+
+=head1 DESCRIPTION
+
+This script creates the Buildroot package files for all Perl/CPAN
+distributions required by all specified distnames. These data are
+fetched from https://metacpan.org/.
+
+See the Buildroot documentation for details on the usage of the Perl
+infrastructure.
+
+The major version of the host perl must be aligned on the target one,
+in order to work with the right CoreList data.
+
+=head1 LICENSE
+
+Copyright (C) 2013-2014 by Francois Perrad <[email protected]>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+This script is a part of Buildroot.
+
+This script requires the module C<MetaCPAN::API::Tiny> (version 1.131730)
+which was included at the beginning of this file by the tool C<fatpack>.
+
+See L<http://search.cpan.org/~nperez/MetaCPAN-API-Tiny-1.131730/>.
+
+See L<http://search.cpan.org/search?query=App-FatPacker&mode=dist>.
+
+These both libraries are free software and may be distributed under the same
+terms as perl itself.
+
+And perl may be distributed under the terms of Artistic v1 or GPL v1 license.
+
+=cut
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v9 2/6 scancpan: a new script

Hi Francois,

Sorry to keep on iterating on this...

Quoted 4 lines · Francois Perrad

which creates Perl/CPAN package files

---

[snip]

support/scripts/scancpan line 474

Quoted 3 lines
support/scripts/scancpan new file +3 -0
+
+
+use 5.018;      # same major version as target perl

I'm not really a perl expert, but doesn't this mean that the script will
not run if your system's perl is older than 5.018? That probably excludes most LTS distros... Not that I have a big issue with that because not many users will actually run this script. And if you have only tested it with 5.018 (like I did), then it's probably best to keep it at that version.

I am certain that this clause does not solve the issue I tried to point
out in my previous review. We want the generated packages to include all the host-packages that are needed for building on a system that can use buildroot.

Bottom line: what I'm saying here is for follow-up patches, it is OK to
go in as is. Except for the next remark:

[snip]

support/scripts/scancpan line 571

Quoted 13 lines
support/scripts/scancpan new file +13 -0
+    if ($force || !-f $cfgname) {
+        my $abstract = $dist->{abstract};
+        say qq{write ${cfgname}} unless $quiet;
+        open my $fh, q{>}, $cfgname;
+        say {$fh} qq{config BR2_PACKAGE_${brname}};
+        say {$fh} qq{\tbool "${fsname}"};
+        foreach my $dep (@{$deps_runtime{$distname}}) {
+            my $brdep = brname( fsname( $dep ) );
+            say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
+        }
+        say {$fh} qq{\thelp} if $abstract;
+        say {$fh} qq{\t  ${abstract}} if $abstract;
+        say {$fh} qq{};

Doesn't this create a spurious empty line at the end of the file? Or is
it needed to add a newline after the abstract?

[snip]

support/scripts/scancpan line 637

Quoted 9 lines

+=head1 NAME

support/scripts/scancpan new file +8 -0
+
+support/scripts/scancpan Try-Tiny Moo
+
+=head1 SYNOPSIS
+
+curl -kL http://install.perlbrew.pl | bash
+
+perlbrew install perl-5.18.2

This is not correct I think...

Quoted 10 lines
support/scripts/scancpan new file +10 -0
+
+supports/scripts/scancpan [options] [distname ...]
+
+ Options:
+   -help
+   -man
+   -quiet
+   -force
+   -recommend
+

[snip]

support/scripts/scancpan line 678

Quoted 5 lines

+=head1 DESCRIPTION

support/scripts/scancpan new file +4 -0
+
+This script creates the Buildroot package files for all Perl/CPAN
+distributions required by all specified distnames. These data are
+fetched from https://metacpan.org/.

Hm, not very clear I think. How about:

---
This script creates templates of the Buildroot package files for all the Perl/CPAN distributions required by the specified distnames. The dependencies and metadata are fetched from https://metacpan.org/.

After running this script, it is necessary to check the generated files. You have to manually enable the host- version if you need it. You have to manually add the license files (FOO_LICENSE_FILES variable). For distributions that link against a target library, you have to add the buildroot package name for that library to the DEPENDENCIES variable.
---

support/scripts/scancpan line 684

Quoted 6 lines
support/scripts/scancpan new file +6 -0
+
+See the Buildroot documentation for details on the usage of the Perl
+infrastructure.
+
+The major version of the host perl must be aligned on the target one,
+in order to work with the right CoreList data.

Right! I didn't think of that.

So to overcome the 'use 5.018;' limitation, we should fatpack in the
CoreList module. However, it's 467K so maybe it should be downloaded instead...

Anyway, for sure this issue is for a follow-up patch.

Regards,
Arnout

Quoted 35 lines
support/scripts/scancpan new file +34 -0
+
+=head1 LICENSE
+
+Copyright (C) 2013-2014 by Francois Perrad <[email protected]>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+This script is a part of Buildroot.
+
+This script requires the module C<MetaCPAN::API::Tiny> (version 1.131730)
+which was included at the beginning of this file by the tool C<fatpack>.
+
+See L<http://search.cpan.org/~nperez/MetaCPAN-API-Tiny-1.131730/>.
+
+See L<http://search.cpan.org/search?query=App-FatPacker&mode=dist>.
+
+These both libraries are free software and may be distributed under the same
+terms as perl itself.
+
+And perl may be distributed under the terms of Artistic v1 or GPL v1 license.
+
+=cut
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#4 lore raw

[Buildroot] [UNSURE]Re: [pkg-perl infra V9 2/6] scancpan: a new script

2014-02-12 18:29 GMT+01:00 Arnout Vandecappelle <[email protected]>:

Quoted 10 lines

Hi Francois,

Sorry to keep on iterating on this...

Quoted 4 lines · Francois Perrad

which creates Perl/CPAN package files

---

[snip]

Quoted 10 lines

support/scripts/scancpan line 474

Quoted 3 lines
support/scripts/scancpan new file +3 -0
+
+
+use 5.018;      # same major version as target perl

I'm not really a perl expert, but doesn't this mean that the script will
not run if your system's perl is older than 5.018? That probably excludes most LTS distros... Not that I have a big issue with that because not many users will actually run this script. And if you have only tested it with 5.018 (like I did), then it's probably best to keep it at that version.

For example, my host is an Ubuntu 12.04 LTS which comes with perl 5.14.2. scancpan cannot run with this system host perl.

     $ support/scripts/scancpan
     Perl v5.18.0 required--this is only v5.14.2, stopped at
support/scripts/scancpan line 474.
     BEGIN failed--compilation aborted at support/scripts/scancpan line 474.

perlbrew allows to install another Perl version in your $HOME. see http://search.cpan.org/~gugod/App-perlbrew-0.67/

     $ perlbrew install perl-5.18.2
     $ perlbrew list
     perl-5.18.2
     $ perlbrew switch perl-5.18.2
     $ which perl
     /home/user/perl5/perlbrew/perls/perl-5.18.2/bin/perl

After that, perl-5.18.2 is my host perl and I can use scancpan.

Fran?ois.

Quoted 140 lines

I am certain that this clause does not solve the issue I tried to point
out in my previous review. We want the generated packages to include all the host-packages that are needed for building on a system that can use buildroot.

Bottom line: what I'm saying here is for follow-up patches, it is OK to
go in as is. Except for the next remark:

[snip]

support/scripts/scancpan line 571

Quoted 13 lines
support/scripts/scancpan new file +13 -0
+    if ($force || !-f $cfgname) {
+        my $abstract = $dist->{abstract};
+        say qq{write ${cfgname}} unless $quiet;
+        open my $fh, q{>}, $cfgname;
+        say {$fh} qq{config BR2_PACKAGE_${brname}};
+        say {$fh} qq{\tbool "${fsname}"};
+        foreach my $dep (@{$deps_runtime{$distname}}) {
+            my $brdep = brname( fsname( $dep ) );
+            say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
+        }
+        say {$fh} qq{\thelp} if $abstract;
+        say {$fh} qq{\t  ${abstract}} if $abstract;
+        say {$fh} qq{};

Doesn't this create a spurious empty line at the end of the file? Or is
it needed to add a newline after the abstract?

[snip]

support/scripts/scancpan line 637

Quoted 9 lines

+=head1 NAME

support/scripts/scancpan new file +8 -0
+
+support/scripts/scancpan Try-Tiny Moo
+
+=head1 SYNOPSIS
+
+curl -kL http://install.perlbrew.pl | bash
+
+perlbrew install perl-5.18.2

This is not correct I think...

Quoted 10 lines
support/scripts/scancpan new file +10 -0
+
+supports/scripts/scancpan [options] [distname ...]
+
+ Options:
+   -help
+   -man
+   -quiet
+   -force
+   -recommend
+

[snip]

support/scripts/scancpan line 678

Quoted 5 lines

+=head1 DESCRIPTION

support/scripts/scancpan new file +4 -0
+
+This script creates the Buildroot package files for all Perl/CPAN
+distributions required by all specified distnames. These data are
+fetched from https://metacpan.org/.

Hm, not very clear I think. How about:

---
This script creates templates of the Buildroot package files for all the Perl/CPAN distributions required by the specified distnames. The dependencies and metadata are fetched from https://metacpan.org/.

After running this script, it is necessary to check the generated files. You have to manually enable the host- version if you need it. You have to manually add the license files (FOO_LICENSE_FILES variable). For distributions that link against a target library, you have to add the buildroot package name for that library to the DEPENDENCIES variable.
---

support/scripts/scancpan line 684

Quoted 6 lines
support/scripts/scancpan new file +6 -0
+
+See the Buildroot documentation for details on the usage of the Perl
+infrastructure.
+
+The major version of the host perl must be aligned on the target one,
+in order to work with the right CoreList data.

Right! I didn't think of that.

So to overcome the 'use 5.018;' limitation, we should fatpack in the
CoreList module. However, it's 467K so maybe it should be downloaded instead...

Anyway, for sure this issue is for a follow-up patch.

Regards,
Arnout

Quoted 25 lines
support/scripts/scancpan new file +24 -0
+
+=head1 LICENSE
+
+Copyright (C) 2013-2014 by Francois Perrad <[email protected]>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+This script is a part of Buildroot.
+
+This script requires the module C<MetaCPAN::API::Tiny> (version 1.131730)
+which was included at the beginning of this file by the tool C<fatpack>.
+

support/scripts/scancpan line 718

Quoted 10 lines
support/scripts/scancpan new file +10 -0
+See L<http://search.cpan.org/~nperez/MetaCPAN-API-Tiny-1.131730/>.
+
+See L<http://search.cpan.org/search?query=App-FatPacker&mode=dist>.
+
+These both libraries are free software and may be distributed under the same
+terms as perl itself.
+
+And perl may be distributed under the terms of Artistic v1 or GPL v1 license.
+
+=cut

--

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#5 lore raw

PATCH v9 3/6 host-perl-xml-parser: rename and refactor with perl infrastructure

In reply to Francois Perrad

Even though libxml-parser-perl had a Config.in file with an option to enable it on the target, this option was hidden by a dependency on BR2_HOST_ONLY. So in practice, it was not possible to enable libxml-parser-perl on the target. This allows us to rename libxml-parser-perl to perl-xml-parser to follow the new naming convention of Perl packages, without having to introduce Config.in.legacy material.

In addition to this rename, the package is converted to use the newly introduced Perl package infrastructure.

---
 package/Config.in                                |    1 -
 package/intltool/intltool.mk                     |    2 +-
 package/libxml-parser-perl/Config.in             |   10 -------
 package/libxml-parser-perl/libxml-parser-perl.mk |   35 ----------------------
 package/metacity/metacity.mk                     |    2 +-
 package/perl-xml-parser/perl-xml-parser.mk       |   17 +++++++++++
 6 files changed, 19 insertions(+), 48 deletions(-)
 delete mode 100644 package/libxml-parser-perl/Config.in
 delete mode 100644 package/libxml-parser-perl/libxml-parser-perl.mk
 create mode 100644 package/perl-xml-parser/perl-xml-parser.mk
package/Config.in +0 -1
index fca61d6..68b4870 100644
@@ -616,7 +616,6 @@ source "package/json-c/Config.in"
 source "package/json-glib/Config.in"
 source "package/libjson/Config.in"
 source "package/libroxml/Config.in"
-source "package/libxml-parser-perl/Config.in"
 source "package/libxml2/Config.in"
 source "package/libxmlpp/Config.in"
 source "package/libxslt/Config.in"
package/intltool/intltool.mk +1 -1
index 58b46e6..6b2a704 100644
@@ -9,7 +9,7 @@ INTLTOOL_SITE = https://launchpad.net/intltool/trunk/$(INTLTOOL_VERSION)/+downlo
 INTLTOOL_LICENSE = GPLv2+
 INTLTOOL_LICENSE_FILES = COPYING
 
-HOST_INTLTOOL_DEPENDENCIES = host-gettext host-libxml-parser-perl
+HOST_INTLTOOL_DEPENDENCIES = host-gettext host-perl-xml-parser
 
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
package/libxml-parser-perl/Config.in deleted +0 -10
deleted file mode 100644
index bdda236..0000000
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_LIBXML_PARSER_PERL
-	bool "libxml-parser-perl"
-	select BR2_PACKAGE_EXPAT
-	# Hide from configuration as we only support the host package
-	# for the moment
-	depends on BR2_HOST_ONLY
-	help
-	  The Perl XML::Parser module.
-
-	  http://www.cpan.org/modules/by-module/XML/
package/libxml-parser-perl/libxml-parser-perl.mk deleted +0 -35
deleted file mode 100644
index 53f3bcf..0000000
@@ -1,35 +0,0 @@
-################################################################################
-#
-# libxml-parser-perl
-#
-################################################################################
-
-LIBXML_PARSER_PERL_VERSION = 2.36
-LIBXML_PARSER_PERL_SOURCE = XML-Parser-$(LIBXML_PARSER_PERL_VERSION).tar.gz
-LIBXML_PARSER_PERL_SITE = http://www.cpan.org/modules/by-module/XML/
-
-LIBXML_PARSER_PERL_DEPENDENCIES = expat
-
-define HOST_LIBXML_PARSER_PERL_CONFIGURE_CMDS
- (cd $(@D) ; \
-   $(HOST_CONFIGURE_OPTS) perl Makefile.PL \
-        PREFIX=$(HOST_DIR)/usr \
-        EXPATLIBPATH=$(HOST_DIR)/usr/lib \
-        EXPATINCPATH=$(HOST_DIR)/usr/include \
-        INSTALLDIRS=site \
-        INSTALLSITELIB=$(HOST_DIR)/usr/lib/perl \
-        INSTALLSITEARCH=$(HOST_DIR)/usr/lib/perl \
-        USE_MM_LD_RUN_PATH=1 \
- )
-endef
-
-define HOST_LIBXML_PARSER_PERL_BUILD_CMDS
- $(HOST_MAKE_ENV) $(MAKE) -C $(@D)
-endef
-
-define HOST_LIBXML_PARSER_PERL_INSTALL_CMDS
- $(HOST_MAKE_ENV) $(MAKE) -C $(@D) install
-endef
-
-$(eval $(generic-package))
-$(eval $(host-generic-package))
package/metacity/metacity.mk +1 -1
index 9306b00..18f5c76 100644
@@ -19,7 +19,7 @@ METACITY_CONF_OPT = --x-includes=$(STAGING_DIR)/usr/include/X11 \
 
 METACITY_DEPENDENCIES = libgtk2 \
 	xlib_libX11 \
-	host-libxml-parser-perl \
+	host-perl-xml-parser \
 	xlib_libXcomposite \
 	xlib_libXfixes \
 	xlib_libXrender \
package/perl-xml-parser/perl-xml-parser.mk new file +17 -0
new file mode 100644
index 0000000..fb9bf0f
@@ -0,0 +1,17 @@
+################################################################################
+#
+# perl-xml-parser
+#
+################################################################################
+
+PERL_XML_PARSER_VERSION = 2.41
+PERL_XML_PARSER_SOURCE = XML-Parser-$(PERL_XML_PARSER_VERSION).tar.gz
+PERL_XML_PARSER_SITE = $(BR2_CPAN_MIRROR)/authors/id/T/TO/TODDR/
+PERL_XML_PARSER_DEPENDENCIES = expat
+PERL_XML_PARSER_LICENSE = Artistic or GPLv1+
+
+HOST_LIBXML_PARSER_PERL_CONF_OPT = \
+	EXPATLIBPATH=$(HOST_DIR)/usr/lib \
+	EXPATINCPATH=$(HOST_DIR)/usr/include
+
+$(eval $(host-perl-package))
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v9 3/6 host-perl-xml-parser: rename and refactor with perl infrastructure

Quoted 8 lines · Francois Perrad

Even though libxml-parser-perl had a Config.in file with an option to enable it on the target, this option was hidden by a dependency on BR2_HOST_ONLY. So in practice, it was not possible to enable libxml-parser-perl on the target. This allows us to rename libxml-parser-perl to perl-xml-parser to follow the new naming convention of Perl packages, without having to introduce Config.in.legacy material.

Quoted 6 lines

In addition to this rename, the package is converted to use the newly introduced Perl package infrastructure.

Note that this one (and the following one) does not depend on the
scancpan script, so it can go in immediately (in -next).

Francois, in your next iteration you should probably move patch #6 to
the beginning and patch #2 to the end, so they are sorted in order of merge priority.

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#7 lore raw

PATCH v9 4/6 host-perl-module-build: new package

In reply to Francois Perrad

the version coming with host-perl is too old

---
 package/perl-module-build/perl-module-build.mk |   12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 package/perl-module-build/perl-module-build.mk
package/perl-module-build/perl-module-build.mk new file +12 -0
new file mode 100644
index 0000000..a95278d
@@ -0,0 +1,12 @@
+################################################################################
+#
+# perl-module-build
+#
+################################################################################
+
+PERL_MODULE_BUILD_VERSION = 0.4204
+PERL_MODULE_BUILD_SOURCE = Module-Build-$(PERL_MODULE_BUILD_VERSION).tar.gz
+PERL_MODULE_BUILD_SITE = $(BR2_CPAN_MIRROR)/authors/id/L/LE/LEONT/
+PERL_MODULE_BUILD_LICENSE = Artistic or GPLv1+
+
+$(eval $(host-perl-package))
Signature · 1 line
1.7.9.5
#8 lore raw

PATCH v9 4/6 host-perl-module-build: new package

Quoted 1 line · Francois Perrad

the version coming with host-perl is too old

That depends on the host's perl of course :-)

Quoted 3 lines

Regards,
Arnout

Quoted 24 lines
---
 package/perl-module-build/perl-module-build.mk |   12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 package/perl-module-build/perl-module-build.mk
package/perl-module-build/perl-module-build.mk new file +12 -0
new file mode 100644
index 0000000..a95278d
@@ -0,0 +1,12 @@
+################################################################################
+#
+# perl-module-build
+#
+################################################################################
+
+PERL_MODULE_BUILD_VERSION = 0.4204
+PERL_MODULE_BUILD_SOURCE = Module-Build-$(PERL_MODULE_BUILD_VERSION).tar.gz
+PERL_MODULE_BUILD_SITE = $(BR2_CPAN_MIRROR)/authors/id/L/LE/LEONT/
+PERL_MODULE_BUILD_LICENSE = Artistic or GPLv1+
+
+$(eval $(host-perl-package))
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#9 lore raw

PATCH v9 4/6 host-perl-module-build: new package

2014-02-12 23:21 GMT+01:00 Arnout Vandecappelle <[email protected]>:

Quoted 5 lines · Francois Perrad
Quoted 1 line

the version coming with host-perl is too old

That depends on the host's perl of course :-)

Some Perl packages depend on very recent versions of Module-Build which are not yet shipped with a stable perl version.
But the cpan client is able to update Module-Build as pre-requirement. On Buildroot, we must install the latest Module-Build.

Fran?ois

Quoted 46 lines
Quoted 3 lines

Regards,
Arnout

Quoted 14 lines
---
 package/perl-module-build/perl-module-build.mk |   12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 package/perl-module-build/perl-module-build.mk
package/perl-module-build/perl-module-build.mk new file +2 -0
new file mode 100644
index 0000000..a95278d
@@ -0,0 +1,12 @@
+################################################################################
+#

package/perl-module-build/perl-module-build.mk line 12

Quoted 10 lines
package/perl-module-build/perl-module-build.mk new file +10 -0
+# perl-module-build
+#
+################################################################################
+
+PERL_MODULE_BUILD_VERSION = 0.4204
+PERL_MODULE_BUILD_SOURCE = Module-Build-$(PERL_MODULE_BUILD_VERSION).tar.gz
+PERL_MODULE_BUILD_SITE = $(BR2_CPAN_MIRROR)/authors/id/L/LE/LEONT/
+PERL_MODULE_BUILD_LICENSE = Artistic or GPLv1+
+
+$(eval $(host-perl-package))

--

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#10 lore raw

PATCH v9 4/6 host-perl-module-build: new package

Quoted 11 lines · Fran?ois Perrad

2014-02-12 23:21 GMT+01:00 Arnout Vandecappelle <[email protected]>:

Quoted 5 lines · Francois Perrad
Quoted 1 line

the version coming with host-perl is too old

That depends on the host's perl of course :-)

Some Perl packages depend on very recent versions of Module-Build which are not yet shipped with a stable perl version.
But the cpan client is able to update Module-Build as pre-requirement. On Buildroot, we must install the latest Module-Build.

OK.

If you would need to send yet another version of the series, can you
include this piece of text in the commit message?

Regards,
Arnout

Quoted 8 lines

Fran?ois

Quoted 5 lines
Quoted 3 lines

[snip]

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#11 lore raw

PATCH v9 5/6 manual: adding packages perl

In reply to Francois Perrad
---
 docs/manual/adding-packages-perl.txt |  110 ++++++++++++++++++++++++++++++++++
 docs/manual/adding-packages.txt      |    2 +
 2 files changed, 112 insertions(+)
 create mode 100644 docs/manual/adding-packages-perl.txt
docs/manual/adding-packages-perl.txt new file +110 -0
new file mode 100644
index 0000000..d33ab3f
@@ -0,0 +1,110 @@
+// -*- mode:doc; -*-
+// vim: set syntax=asciidoc:
+
+Infrastructure for Perl/CPAN packages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+[[perl-package-tutorial]]
+
++perl-package+ tutorial
+^^^^^^^^^^^^^^^^^^^^^^^
+
+First, let's see how to write a +.mk+ file for a Perl/CPAN package,
+with an example :
+
+------------------------
+01: ################################################################################
+02: #
+03: # perl-foo-bar
+04: #
+05: ################################################################################
+06:
+07: PERL_FOO_BAR_VERSION = 0.02
+08: PERL_FOO_BAR_SOURCE = Foo-Bar-$(PERL_FOO_BAR_VERSION).tar.gz
+09: PERL_FOO_BAR_SITE = $(BR2_CPAN_MIRROR)/authors/id/M/MO/MONGER/
+10: PERL_FOO_BAR_DEPENDENCIES = perl-strictures
+11: PERL_FOO_BAR_LICENSE = Artistic or GPLv1+
+12: PERL_FOO_BAR_LICENSE_FILES = LICENSE
+13:
+14: $(eval $(perl-package))
+------------------------
+
+On line 7, we declare the version of the package.
+
+On line 8 and 9, we declare the name of the tarball and the location
+of the tarball on a CPAN server. Buildroot will automatically download
+the tarball from this location.
+
+On line 10, we declare our dependencies, so that they are built
+before the build process of our package starts.
+
+On line 11 and 12, we give licensing details about the package (its
+license on line 11, and the file containing the license text on line
+12).
+
+Finally, on line 14, we invoke the +perl-package+ macro that
+generates all the Makefile rules that actually allow the package to be
+built.
+
+Most of these data can be retrieved from https://metacpan.org/.
+So, this file and the Config.in can be generated by running
+the script +supports/scripts/scancpan Foo-Bar+ in the +TOPDIR+ directory
+(or in the +BR2_EXTERNAL+ directory).
+This script recursively creates packages for all required Perl/CPAN
+dependencies.
+
+[[perl-package-reference]]
+
++perl-package+ reference
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+As a policy, packages that provide Perl/CPAN modules should all be
+named +perl-<something>+ in Buildroot.
+
+This infrastructure handles various Perl build systems :
++ExtUtils-MakeMaker+, +Module-Build+ and +Module-Build-Tiny+.
++Build.PL+ is always preferred when a package provides a +Makefile.PL+
+and a +Build.PL+.
+
+The main macro of the Perl/CPAN package infrastructure is
++perl-package+. It is similar to the +generic-package+ macro. The ability to
+have target and host packages is also available, with the
++host-perl-package+ macro.
+
+Just like the generic infrastructure, the Perl/CPAN infrastructure
+works by defining a number of variables before calling the
++perl-package+ macro.
+
+First, all the package metadata information variables that exist in the
+generic infrastructure also exist in the Perl/CPAN infrastructure:
++PERL_FOO_VERSION+, +PERL_FOO_SOURCE+,
++PERL_FOO_PATCH+, +PERL_FOO_SITE+,
++PERL_FOO_SUBDIR+, +PERL_FOO_DEPENDENCIES+,
++PERL_FOO_INSTALL_TARGET+.
+
+Note that:
+
+ * Setting +PERL_FOO_INSTALL_STAGING+ to +YES+ has no effect (unless
+   a +PERL_FOO_INSTALL_STAGING_CMDS+ variable is defined), since
+   Perl modules generally don't need to be installed to the
+   +staging+ directory.
+
+A few additional variables, specific to the Perl/CPAN infrastructure,
+can also be defined. Many of them are only useful in very specific
+cases, typical packages will therefore only use a few of them.
+
+* +PERL_FOO_CONF_OPT+, to specify additional configure
+  options to pass to the +perl Makefile.PL+ or +perl Build.PL+.
+  By default, empty.
+
+* +PERL_FOO_BUILD_OPT+, to specify additional options to
+  pass to +make pure_all+ or +perl Build build+ in the build step.
+  By default, empty.
+
+* +PERL_FOO_INSTALL_TARGET_OPT+, to specify additional options to
+  pass to +make pure_install+ or +perl Build install+ in the install step.
+  By default, empty.
+
+* +HOST_PERL_FOO_INSTALL_OPT+, to specify additional options to
+  pass to +make pure_install+ or +perl Build install+ in the install step.
+  By default, empty.
docs/manual/adding-packages.txt +2 -0
index cc86529..745e33a 100644
@@ -22,6 +22,8 @@ include::adding-packages-python.txt[]
 
 include::adding-packages-luarocks.txt[]
 
+include::adding-packages-perl.txt[]
+
 include::adding-packages-hooks.txt[]
 
 include::adding-packages-gettext.txt[]
Signature · 1 line
1.7.9.5
#12 lore raw

PATCH v9 6/6 perl: remove PERL_INSTALL_TARGET_GOALS

In reply to Francois Perrad

useless since previous commit (removal of BR2_HAVE_DOCUMENTATION)
see http://git.buildroot.net/buildroot/diff/package/perl/perl.mk?id=7164a32632d14cb83698ddec45e84ad2f3252e9e

---
 package/perl/perl.mk |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
package/perl/perl.mk +1 -3
index 5ede81b..51aeb14 100644
@@ -90,10 +90,8 @@ define PERL_INSTALL_STAGING_CMDS
 	$(MAKE1) -C $(@D) DESTDIR="$(STAGING_DIR)" install.perl
 endef
 
-PERL_INSTALL_TARGET_GOALS = install.perl
-
 define PERL_INSTALL_TARGET_CMDS
-	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" $(PERL_INSTALL_TARGET_GOALS)
+	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" install.perl
 endef
 
 $(eval $(generic-package))
Signature · 1 line
1.7.9.5
#13 lore raw

PATCH v9 6/6 perl: remove PERL_INSTALL_TARGET_GOALS

Quoted 6 lines · Francois Perrad

useless since previous commit (removal of BR2_HAVE_DOCUMENTATION)
see http://git.buildroot.net/buildroot/diff/package/perl/perl.mk?id=7164a32632d14cb83698ddec45e84ad2f3252e9e

Note that this patch can go in immediately, perhaps even for 2014.02.

Regards,
Arnout

Quoted 21 lines
---
 package/perl/perl.mk |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
package/perl/perl.mk +1 -3
index 5ede81b..51aeb14 100644
@@ -90,10 +90,8 @@ define PERL_INSTALL_STAGING_CMDS
 	$(MAKE1) -C $(@D) DESTDIR="$(STAGING_DIR)" install.perl
 endef
 
-PERL_INSTALL_TARGET_GOALS = install.perl
-
 define PERL_INSTALL_TARGET_CMDS
-	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" $(PERL_INSTALL_TARGET_GOALS)
+	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" install.perl
 endef
 
 $(eval $(generic-package))
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F