zynq: Update CLK in bdinfo
Subsystems (2)
PATCH v2 1/1 zynq: Update CLK in bdinfo
ARM has specific clk entries which should be also setup.
---
Changes in v2:
- Freq is expected to be in MHz
- Use different DDR clock input
arch/arm/cpu/armv7/zynq/clk.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/cpu/armv7/zynq/clk.c +5 -0
@@ -161,6 +161,8 @@ static void init_ddr_clocks(void) clks[dci_clk].frequency =DIV_ROUND_CLOSEST (DIV_ROUND_CLOSEST (prate, div0), div1); clks[dci_clk].name ="dci" ; + + gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency /1000000 ; }static void init_cpu_clocks (void )
@@ -593,6 +595,9 @@ int set_cpu_clk_info(void)init_periph_clocks ();init_aper_clocks (); + gd->bd->bi_arm_freq = gd->cpu_clk /1000000 ; + gd->bd->bi_dsp_freq =0 ; +return 0 ; }
--
1.8.2.3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140205/97b6d946/attachment.pgp>
PATCH v2 1/1 zynq: Update CLK in bdinfo
Hi Michal,
Quoted 11 lines · Michal Simek
ARM has specific clk entries which should be also setup.
Signed-off-by Michal Simek <[email protected]>---
Changes in v2:
- Freq is expected to be in MHz
- Use different DDR clock inputarch/arm/cpu/armv7/zynq/clk.c | 5 +++++ 1 file changed, 5 insertions(+)
This is assigned to me, but it seems to be V2 of
http://patchwork.ozlabs.org/patch/313199/ which was assigned to you. Should I apply this in ARM as a standalone patch?
Amicalement,
Signature · 1 line
Albert.
PATCH v2 1/1 zynq: Update CLK in bdinfo
Quoted 14 lines · Albert ARIBAUD
Hi Michal,
Quoted 9 lines · Michal Simek
ARM has specific clk entries which should be also setup.
Signed-off-by Michal Simek <[email protected]>---
Changes in v2:
- Freq is expected to be in MHz
- Use different DDR clock input
Quoted 6 lines
Quoted 2 lines
arch/arm/cpu/armv7/zynq/clk.c | 5 +++++ 1 file changed, 5 insertions(+)This is assigned to me, but it seems to be V2 of
http://patchwork.ozlabs.org/patch/313199/ which was assigned to you. Should I apply this in ARM as a standalone patch?
no. I will be/is the part of my zynq pull request.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140213/4f336010/attachment.pgp>