Skip to contentSkip to conversation

infra: Add PRE_*_HOOKS for every step

PATCH Superseded Maxime Hadjinlian 2 participants 3 messages Feb 13, 2014 – Feb 17, 2014

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 infra: Add PRE_*_HOOKS for every step

Add PRE_*_HOOKS to all the different steps through which a package may go.

This will help avoid using POST_*_HOOKS to do tasks that should be done in the PRE_*_HOOKS of the next step.
Otherwise, when the user would do a make foo-re<step>, this would not do what was really intented, the POST_*_HOOK of the preceding step not being executed.

---
 docs/manual/adding-packages-hooks.txt | 17 +++++++++++++++++
 package/pkg-generic.mk                | 22 ++++++++++++++++++++--
 2 files changed, 37 insertions(+), 2 deletions(-)
docs/manual/adding-packages-hooks.txt +17 -0
index d96c991..38d3e4a 100644
@@ -14,17 +14,34 @@ of the package construction.
 
 The following hook points are available:
 
+* +LIBFOO_PRE_DOWNLOAD_HOOKS+
 * +LIBFOO_POST_DOWNLOAD_HOOKS+
+
+* +LIBFOO_PRE_EXTRACT_HOOKS+
 * +LIBFOO_POST_EXTRACT_HOOKS+
+
+* +LIBFOO_PRE_RSYNC_HOOKS+
 * +LIBFOO_POST_RSYNC_HOOKS+
+
 * +LIBFOO_PRE_PATCH_HOOKS+
 * +LIBFOO_POST_PATCH_HOOKS+
+
 * +LIBFOO_PRE_CONFIGURE_HOOKS+
 * +LIBFOO_POST_CONFIGURE_HOOKS+
+
+* +LIBFOO_PRE_BUILD_HOOKS+
 * +LIBFOO_POST_BUILD_HOOKS+
+
+* +LIBFOO_PRE_INSTALL_HOOKS+ (for host packages only)
 * +LIBFOO_POST_INSTALL_HOOKS+ (for host packages only)
+
+* +LIBFOO_PRE_INSTALL_STAGING_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_STAGING_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_INSTALL_TARGET_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_TARGET_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_LEGAL_INFO_HOOKS+
 * +LIBFOO_POST_LEGAL_INFO_HOOKS+
 
 These variables are 'lists' of variable names containing actions to be
package/pkg-generic.mk +20 -2
index 555c3c2..b6016d9 100644
@@ -70,6 +70,7 @@ endif
 
 # Retrieve the archive
 $(BUILD_DIR)/%/.stamp_downloaded:
+	$(foreach hook,$($(PKG)_PRE_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
 ifeq ($(DL_MODE),DOWNLOAD)
 # Only show the download message if it isn't already downloaded
 	$(Q)if test ! -e $(DL_DIR)/$($(PKG)_SOURCE); then \
@@ -100,6 +101,7 @@ endif
 # Unpack the archive
 $(BUILD_DIR)/%/.stamp_extracted:
 	@$(call step_start,extract)
+	$(foreach hook,$($(PKG)_PRE_EXTRACT_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Extracting")
 	$(Q)mkdir -p $(@D)
 	$($(PKG)_EXTRACT_CMDS)
@@ -112,6 +114,7 @@ $(BUILD_DIR)/%/.stamp_extracted:
 # Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
 # used.
 $(BUILD_DIR)/%/.stamp_rsynced:
+	$(foreach hook,$($(PKG)_PRE_RSYNC_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
 	@test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
 	rsync -au $(RSYNC_VCS_EXCLUSIONS) $(SRCDIR)/ $(@D)
@@ -141,8 +144,8 @@ $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS =  $(PKGDIR)
 $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS += $(addsuffix /$(RAWNAME),$(call qstrip,$(BR2_GLOBAL_PATCH_DIR)))
 $(BUILD_DIR)/%/.stamp_patched:
 	@$(call step_start,patch)
-	@$(call MESSAGE,"Patching")
 	$(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
+	@$(call MESSAGE,"Patching")
 	$(foreach p,$($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $(notdir $(p))$(sep))
 	$(Q)( \
 	for D in $(PATCH_BASE_DIRS); do \
@@ -172,6 +175,7 @@ $(BUILD_DIR)/%/.stamp_configured:
 # Build
 $(BUILD_DIR)/%/.stamp_built::
 	@$(call step_start,build)
+	$(foreach hook,$($(PKG)_PRE_BUILD_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Building")
 	$($(PKG)_BUILD_CMDS)
 	$(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
@@ -181,6 +185,7 @@ $(BUILD_DIR)/%/.stamp_built::
 # Install to host dir
 $(BUILD_DIR)/%/.stamp_host_installed:
 	@$(call step_start,install-host)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to host directory")
 	$($(PKG)_INSTALL_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
@@ -190,6 +195,7 @@ $(BUILD_DIR)/%/.stamp_host_installed:
 # Install to staging dir
 $(BUILD_DIR)/%/.stamp_staging_installed:
 	@$(call step_start,install-staging)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to staging directory")
 	$($(PKG)_INSTALL_STAGING_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
@@ -206,6 +212,7 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
 # Install to images dir
 $(BUILD_DIR)/%/.stamp_images_installed:
 	@$(call step_start,install-image)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to images directory")
 	$($(PKG)_INSTALL_IMAGES_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
@@ -215,6 +222,7 @@ $(BUILD_DIR)/%/.stamp_images_installed:
 # Install to target dir
 $(BUILD_DIR)/%/.stamp_target_installed:
 	@$(call step_start,install-target)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to target")
 	$(if $(BR2_INIT_SYSTEMD),\
 		$($(PKG)_INSTALL_INIT_SYSTEMD))
@@ -377,19 +385,28 @@ $(2)_EXTRACT_CMDS ?= \
 	$$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
 	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
-# post-steps hooks
+# pre/post-steps hooks
+$(2)_PRE_DOWNLOAD_HOOKS        ?=
 $(2)_POST_DOWNLOAD_HOOKS        ?=
+$(2)_PRE_EXTRACT_HOOKS         ?=
 $(2)_POST_EXTRACT_HOOKS         ?=
+$(2)_PRE_RSYNC_HOOKS           ?=
 $(2)_POST_RSYNC_HOOKS           ?=
 $(2)_PRE_PATCH_HOOKS            ?=
 $(2)_POST_PATCH_HOOKS           ?=
 $(2)_PRE_CONFIGURE_HOOKS        ?=
 $(2)_POST_CONFIGURE_HOOKS       ?=
+$(2)_PRE_BUILD_HOOKS           ?=
 $(2)_POST_BUILD_HOOKS           ?=
+$(2)_PRE_INSTALL_HOOKS         ?=
 $(2)_POST_INSTALL_HOOKS         ?=
+$(2)_PRE_INSTALL_STAGING_HOOKS ?=
 $(2)_POST_INSTALL_STAGING_HOOKS ?=
+$(2)_PRE_INSTALL_TARGET_HOOKS  ?=
 $(2)_POST_INSTALL_TARGET_HOOKS  ?=
+$(2)_PRE_INSTALL_IMAGES_HOOKS  ?=
 $(2)_POST_INSTALL_IMAGES_HOOKS  ?=
+$(2)_PRE_LEGAL_INFO_HOOKS      ?=
 $(2)_POST_LEGAL_INFO_HOOKS      ?=
 
 # human-friendly targets and target sequencing
@@ -545,6 +562,7 @@ $(1)-legal-info:
 # Packages without a source are assumed to be part of Buildroot, skip them.
 ifneq ($(call qstrip,$$($(2)_SOURCE)),)
 
+	$(foreach hook,$($(2)_PRE_LEGAL_INFO_HOOKS),$(call $(hook))$(sep))
 ifeq ($$($(2)_SITE_METHOD),local)
 # Packages without a tarball: don't save and warn
 	@$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)
Signature · 1 line
1.8.5.3
#1 lore raw

PATCH 1/2 infra: Add PRE_*_HOOKS for every step

Quoted 58 lines · Maxime Hadjinlian

Add PRE_*_HOOKS to all the different steps through which a package may go.

This will help avoid using POST_*_HOOKS to do tasks that should be done in the PRE_*_HOOKS of the next step.
Otherwise, when the user would do a make foo-re<step>, this would not do what was really intented, the POST_*_HOOK of the preceding step not being executed.

---
 docs/manual/adding-packages-hooks.txt | 17 +++++++++++++++++
 package/pkg-generic.mk                | 22 ++++++++++++++++++++--
 2 files changed, 37 insertions(+), 2 deletions(-)
docs/manual/adding-packages-hooks.txt +17 -0
index d96c991..38d3e4a 100644
@@ -14,17 +14,34 @@ of the package construction.
 
 The following hook points are available:
 
+* +LIBFOO_PRE_DOWNLOAD_HOOKS+
 * +LIBFOO_POST_DOWNLOAD_HOOKS+
+
+* +LIBFOO_PRE_EXTRACT_HOOKS+
 * +LIBFOO_POST_EXTRACT_HOOKS+
+
+* +LIBFOO_PRE_RSYNC_HOOKS+
 * +LIBFOO_POST_RSYNC_HOOKS+
+
 * +LIBFOO_PRE_PATCH_HOOKS+
 * +LIBFOO_POST_PATCH_HOOKS+
+
 * +LIBFOO_PRE_CONFIGURE_HOOKS+
 * +LIBFOO_POST_CONFIGURE_HOOKS+
+
+* +LIBFOO_PRE_BUILD_HOOKS+
 * +LIBFOO_POST_BUILD_HOOKS+
+
+* +LIBFOO_PRE_INSTALL_HOOKS+ (for host packages only)
 * +LIBFOO_POST_INSTALL_HOOKS+ (for host packages only)
+
+* +LIBFOO_PRE_INSTALL_STAGING_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_STAGING_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_INSTALL_TARGET_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_TARGET_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_LEGAL_INFO_HOOKS+
 * +LIBFOO_POST_LEGAL_INFO_HOOKS+
 
 These variables are 'lists' of variable names containing actions to be
package/pkg-generic.mk +0 -0
index 555c3c2..b6016d9 100644

package/pkg-generic.mk endif · line 74

Quoted 5 lines
package/pkg-generic.mk +1 -0
@@ -70,6 +70,7 @@ endif
 
 # Retrieve the archive
 $(BUILD_DIR)/%/.stamp_downloaded:
+	$(foreach hook,$($(PKG)_PRE_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
 ifeq ($(DL_MODE),DOWNLOAD)

Actually, I think it's more appropriate that the message is printed
before the hooks, like in the patch step, and not after the hooks.

Note that that also means that the MESSAGE call should be removed from
AUTORECONF_HOOK - which is not ideal either... So I'm not 100% certain about this.

Quoted 99 lines
package/pkg-generic.mk +18 -2
 # Only show the download message if it isn't already downloaded
 	$(Q)if test ! -e $(DL_DIR)/$($(PKG)_SOURCE); then \
@@ -100,6 +101,7 @@ endif
 # Unpack the archive
 $(BUILD_DIR)/%/.stamp_extracted:
 	@$(call step_start,extract)
+	$(foreach hook,$($(PKG)_PRE_EXTRACT_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Extracting")
 	$(Q)mkdir -p $(@D)
 	$($(PKG)_EXTRACT_CMDS)
@@ -112,6 +114,7 @@ $(BUILD_DIR)/%/.stamp_extracted:
 # Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
 # used.
 $(BUILD_DIR)/%/.stamp_rsynced:
+	$(foreach hook,$($(PKG)_PRE_RSYNC_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
 	@test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
 	rsync -au $(RSYNC_VCS_EXCLUSIONS) $(SRCDIR)/ $(@D)
@@ -141,8 +144,8 @@ $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS =  $(PKGDIR)
 $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS += $(addsuffix /$(RAWNAME),$(call qstrip,$(BR2_GLOBAL_PATCH_DIR)))
 $(BUILD_DIR)/%/.stamp_patched:
 	@$(call step_start,patch)
-	@$(call MESSAGE,"Patching")
 	$(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
+	@$(call MESSAGE,"Patching")
 	$(foreach p,$($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $(notdir $(p))$(sep))
 	$(Q)( \
 	for D in $(PATCH_BASE_DIRS); do \
@@ -172,6 +175,7 @@ $(BUILD_DIR)/%/.stamp_configured:
 # Build
 $(BUILD_DIR)/%/.stamp_built::
 	@$(call step_start,build)
+	$(foreach hook,$($(PKG)_PRE_BUILD_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Building")
 	$($(PKG)_BUILD_CMDS)
 	$(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
@@ -181,6 +185,7 @@ $(BUILD_DIR)/%/.stamp_built::
 # Install to host dir
 $(BUILD_DIR)/%/.stamp_host_installed:
 	@$(call step_start,install-host)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to host directory")
 	$($(PKG)_INSTALL_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
@@ -190,6 +195,7 @@ $(BUILD_DIR)/%/.stamp_host_installed:
 # Install to staging dir
 $(BUILD_DIR)/%/.stamp_staging_installed:
 	@$(call step_start,install-staging)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to staging directory")
 	$($(PKG)_INSTALL_STAGING_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
@@ -206,6 +212,7 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
 # Install to images dir
 $(BUILD_DIR)/%/.stamp_images_installed:
 	@$(call step_start,install-image)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to images directory")
 	$($(PKG)_INSTALL_IMAGES_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
@@ -215,6 +222,7 @@ $(BUILD_DIR)/%/.stamp_images_installed:
 # Install to target dir
 $(BUILD_DIR)/%/.stamp_target_installed:
 	@$(call step_start,install-target)
+	$(foreach hook,$($(PKG)_PRE_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
 	@$(call MESSAGE,"Installing to target")
 	$(if $(BR2_INIT_SYSTEMD),\
 		$($(PKG)_INSTALL_INIT_SYSTEMD))
@@ -377,19 +385,28 @@ $(2)_EXTRACT_CMDS ?= \
 	$$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
 	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
-# post-steps hooks
+# pre/post-steps hooks
+$(2)_PRE_DOWNLOAD_HOOKS        ?=
 $(2)_POST_DOWNLOAD_HOOKS        ?=
+$(2)_PRE_EXTRACT_HOOKS         ?=
 $(2)_POST_EXTRACT_HOOKS         ?=
+$(2)_PRE_RSYNC_HOOKS           ?=
 $(2)_POST_RSYNC_HOOKS           ?=
 $(2)_PRE_PATCH_HOOKS            ?=
 $(2)_POST_PATCH_HOOKS           ?=
 $(2)_PRE_CONFIGURE_HOOKS        ?=
 $(2)_POST_CONFIGURE_HOOKS       ?=
+$(2)_PRE_BUILD_HOOKS           ?=
 $(2)_POST_BUILD_HOOKS           ?=
+$(2)_PRE_INSTALL_HOOKS         ?=
 $(2)_POST_INSTALL_HOOKS         ?=
+$(2)_PRE_INSTALL_STAGING_HOOKS ?=
 $(2)_POST_INSTALL_STAGING_HOOKS ?=
+$(2)_PRE_INSTALL_TARGET_HOOKS  ?=
 $(2)_POST_INSTALL_TARGET_HOOKS  ?=
+$(2)_PRE_INSTALL_IMAGES_HOOKS  ?=
 $(2)_POST_INSTALL_IMAGES_HOOKS  ?=
+$(2)_PRE_LEGAL_INFO_HOOKS      ?=
 $(2)_POST_LEGAL_INFO_HOOKS      ?=
 
 # human-friendly targets and target sequencing

package/pkg-generic.mk $(1)-legal-info: · line 565

Quoted 4 lines
package/pkg-generic.mk +1 -0
@@ -545,6 +562,7 @@ $(1)-legal-info:
 # Packages without a source are assumed to be part of Buildroot, skip them.
 ifneq ($(call qstrip,$$($(2)_SOURCE)),)
 
+	$(foreach hook,$($(2)_PRE_LEGAL_INFO_HOOKS),$(call $(hook))$(sep))

The POST_LEGAL_INFO_HOOKS are executed even if the condition is not
true, so the same should be done for the PRE_ hooks.

Regards,
Arnout

Quoted 4 lines
package/pkg-generic.mk +0 -0
 ifeq ($$($(2)_SITE_METHOD),local)
 # Packages without a tarball: don't save and warn
 	@$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#2 lore raw

PATCH 1/2 infra: Add PRE_*_HOOKS for every step

Hi Arnout, all

Quoted 60 lines · Arnout Vandecappelle
Quoted 59 lines · Maxime Hadjinlian

Add PRE_*_HOOKS to all the different steps through which a package may go.

This will help avoid using POST_*_HOOKS to do tasks that should be done in the PRE_*_HOOKS of the next step.
Otherwise, when the user would do a make foo-re<step>, this would not do what was really intented, the POST_*_HOOK of the preceding step not being executed.

---
 docs/manual/adding-packages-hooks.txt | 17 +++++++++++++++++
 package/pkg-generic.mk                | 22 ++++++++++++++++++++--
 2 files changed, 37 insertions(+), 2 deletions(-)
docs/manual/adding-packages-hooks.txt +17 -0
index d96c991..38d3e4a 100644
@@ -14,17 +14,34 @@ of the package construction.
 
 The following hook points are available:
 
+* +LIBFOO_PRE_DOWNLOAD_HOOKS+
 * +LIBFOO_POST_DOWNLOAD_HOOKS+
+
+* +LIBFOO_PRE_EXTRACT_HOOKS+
 * +LIBFOO_POST_EXTRACT_HOOKS+
+
+* +LIBFOO_PRE_RSYNC_HOOKS+
 * +LIBFOO_POST_RSYNC_HOOKS+
+
 * +LIBFOO_PRE_PATCH_HOOKS+
 * +LIBFOO_POST_PATCH_HOOKS+
+
 * +LIBFOO_PRE_CONFIGURE_HOOKS+
 * +LIBFOO_POST_CONFIGURE_HOOKS+
+
+* +LIBFOO_PRE_BUILD_HOOKS+
 * +LIBFOO_POST_BUILD_HOOKS+
+
+* +LIBFOO_PRE_INSTALL_HOOKS+ (for host packages only)
 * +LIBFOO_POST_INSTALL_HOOKS+ (for host packages only)
+
+* +LIBFOO_PRE_INSTALL_STAGING_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_STAGING_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_INSTALL_TARGET_HOOKS+ (for target packages only)
 * +LIBFOO_POST_INSTALL_TARGET_HOOKS+ (for target packages only)
+
+* +LIBFOO_PRE_LEGAL_INFO_HOOKS+
 * +LIBFOO_POST_LEGAL_INFO_HOOKS+
 
 These variables are 'lists' of variable names containing actions to be
package/pkg-generic.mk +0 -0
index 555c3c2..b6016d9 100644
@@ -70,6 +70,7 @@ endif
 
Quoted 7 lines

package/pkg-generic.mk endif · line 74

Quoted 4 lines
package/pkg-generic.mk +1 -0
 # Retrieve the archive
 $(BUILD_DIR)/%/.stamp_downloaded:
+     $(foreach hook,$($(PKG)_PRE_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
 ifeq ($(DL_MODE),DOWNLOAD)

Actually, I think it's more appropriate that the message is printed
before the hooks, like in the patch step, and not after the hooks.

Agreed, at least the users knows in which steps he is.

Quoted 4 lines

Note that that also means that the MESSAGE call should be removed from
AUTORECONF_HOOK - which is not ideal either... So I'm not 100% certain about this.

Maybe we don't have to make a rule about that and simply do, what seems to be best ?

Quoted 103 lines
Quoted 103 lines
package/pkg-generic.mk +18 -2
 # Only show the download message if it isn't already downloaded
      $(Q)if test ! -e $(DL_DIR)/$($(PKG)_SOURCE); then \
@@ -100,6 +101,7 @@ endif
 # Unpack the archive
 $(BUILD_DIR)/%/.stamp_extracted:
      @$(call step_start,extract)
+     $(foreach hook,$($(PKG)_PRE_EXTRACT_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Extracting")
      $(Q)mkdir -p $(@D)
      $($(PKG)_EXTRACT_CMDS)
@@ -112,6 +114,7 @@ $(BUILD_DIR)/%/.stamp_extracted:
 # Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
 # used.
 $(BUILD_DIR)/%/.stamp_rsynced:
+     $(foreach hook,$($(PKG)_PRE_RSYNC_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
      @test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
      rsync -au $(RSYNC_VCS_EXCLUSIONS) $(SRCDIR)/ $(@D)
@@ -141,8 +144,8 @@ $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS =  $(PKGDIR)
 $(BUILD_DIR)/%/.stamp_patched: PATCH_BASE_DIRS += $(addsuffix /$(RAWNAME),$(call qstrip,$(BR2_GLOBAL_PATCH_DIR)))
 $(BUILD_DIR)/%/.stamp_patched:
      @$(call step_start,patch)
-     @$(call MESSAGE,"Patching")
      $(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
+     @$(call MESSAGE,"Patching")
      $(foreach p,$($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $(notdir $(p))$(sep))
      $(Q)( \
      for D in $(PATCH_BASE_DIRS); do \
@@ -172,6 +175,7 @@ $(BUILD_DIR)/%/.stamp_configured:
 # Build
 $(BUILD_DIR)/%/.stamp_built::
      @$(call step_start,build)
+     $(foreach hook,$($(PKG)_PRE_BUILD_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Building")
      $($(PKG)_BUILD_CMDS)
      $(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
@@ -181,6 +185,7 @@ $(BUILD_DIR)/%/.stamp_built::
 # Install to host dir
 $(BUILD_DIR)/%/.stamp_host_installed:
      @$(call step_start,install-host)
+     $(foreach hook,$($(PKG)_PRE_INSTALL_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Installing to host directory")
      $($(PKG)_INSTALL_CMDS)
      $(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
@@ -190,6 +195,7 @@ $(BUILD_DIR)/%/.stamp_host_installed:
 # Install to staging dir
 $(BUILD_DIR)/%/.stamp_staging_installed:
      @$(call step_start,install-staging)
+     $(foreach hook,$($(PKG)_PRE_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Installing to staging directory")
      $($(PKG)_INSTALL_STAGING_CMDS)
      $(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
@@ -206,6 +212,7 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
 # Install to images dir
 $(BUILD_DIR)/%/.stamp_images_installed:
      @$(call step_start,install-image)
+     $(foreach hook,$($(PKG)_PRE_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Installing to images directory")
      $($(PKG)_INSTALL_IMAGES_CMDS)
      $(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
@@ -215,6 +222,7 @@ $(BUILD_DIR)/%/.stamp_images_installed:
 # Install to target dir
 $(BUILD_DIR)/%/.stamp_target_installed:
      @$(call step_start,install-target)
+     $(foreach hook,$($(PKG)_PRE_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
      @$(call MESSAGE,"Installing to target")
      $(if $(BR2_INIT_SYSTEMD),\
              $($(PKG)_INSTALL_INIT_SYSTEMD))
@@ -377,19 +385,28 @@ $(2)_EXTRACT_CMDS ?= \
      $$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
      $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
-# post-steps hooks
+# pre/post-steps hooks
+$(2)_PRE_DOWNLOAD_HOOKS        ?=
 $(2)_POST_DOWNLOAD_HOOKS        ?=
+$(2)_PRE_EXTRACT_HOOKS         ?=
 $(2)_POST_EXTRACT_HOOKS         ?=
+$(2)_PRE_RSYNC_HOOKS           ?=
 $(2)_POST_RSYNC_HOOKS           ?=
 $(2)_PRE_PATCH_HOOKS            ?=
 $(2)_POST_PATCH_HOOKS           ?=
 $(2)_PRE_CONFIGURE_HOOKS        ?=
 $(2)_POST_CONFIGURE_HOOKS       ?=
+$(2)_PRE_BUILD_HOOKS           ?=
 $(2)_POST_BUILD_HOOKS           ?=
+$(2)_PRE_INSTALL_HOOKS         ?=
 $(2)_POST_INSTALL_HOOKS         ?=
+$(2)_PRE_INSTALL_STAGING_HOOKS ?=
 $(2)_POST_INSTALL_STAGING_HOOKS ?=
+$(2)_PRE_INSTALL_TARGET_HOOKS  ?=
 $(2)_POST_INSTALL_TARGET_HOOKS  ?=
+$(2)_PRE_INSTALL_IMAGES_HOOKS  ?=
 $(2)_POST_INSTALL_IMAGES_HOOKS  ?=
+$(2)_PRE_LEGAL_INFO_HOOKS      ?=
 $(2)_POST_LEGAL_INFO_HOOKS      ?=
 
 # human-friendly targets and target sequencing
@@ -545,6 +562,7 @@ $(1)-legal-info:
 # Packages without a source are assumed to be part of Buildroot, skip them.
 ifneq ($(call qstrip,$$($(2)_SOURCE)),)
 
Quoted 4 lines

package/pkg-generic.mk $(1)-legal-info: · line 565

Quoted 1 line
package/pkg-generic.mk +1 -0
+     $(foreach hook,$($(2)_PRE_LEGAL_INFO_HOOKS),$(call $(hook))$(sep))

The POST_LEGAL_INFO_HOOKS are executed even if the condition is not
true, so the same should be done for the PRE_ hooks.

Right ! Thanks, I will fix this.

Quoted 17 lines

Regards,
Arnout

package/pkg-generic.mk $(1)-legal-info: · line 568

Quoted 4 lines
package/pkg-generic.mk +0 -0
 ifeq ($$($(2)_SITE_METHOD),local)
 # Packages without a tarball: don't save and warn
      @$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)

--

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F