Skip to contentSkip to conversation

clk: sunxi: Change compatibles pattern

PATCH New Maxime Ripard 3 participants 6 messages Feb 6, 2014 – Feb 19, 2014

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover clk: sunxi: Change compatibles pattern

Hi,

This is the second version of the clock compatible changes. The only difference with the v1 being that we're now droping the old compatibles, instead of keeping them, since the DT maintainers said it was fine.

Thanks,
Maxime

Maxime Ripard (2):
clk: sunxi: Add new clock compatibles
ARM: sunxi: dt: Convert to the new clock compatibles

 Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++-------
 arch/arm/boot/dts/sun4i-a10.dtsi                  | 60 +++++++++++------------
 arch/arm/boot/dts/sun5i-a10s.dtsi                 | 48 +++++++++---------
 arch/arm/boot/dts/sun5i-a13.dtsi                  | 48 +++++++++---------
 arch/arm/boot/dts/sun6i-a31.dtsi                  | 10 ++--
 arch/arm/boot/dts/sun7i-a20.dtsi                  | 54 ++++++++++----------
 drivers/clk/sunxi/clk-sunxi.c                     | 30 ++++++------
 7 files changed, 143 insertions(+), 143 deletions(-)
Signature · 1 line
1.8.4.2
#1 lore raw

PATCH v2 1/2 clk: sunxi: Add new clock compatibles

The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the clock driver for consistency, and keep the older one for backward compatibility.

---
 Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++++++------------
 drivers/clk/sunxi/clk-sunxi.c                     | 30 +++++++++----------
 2 files changed, 33 insertions(+), 33 deletions(-)
Documentation/devicetree/bindings/clock/sunxi.txt +18 -18
index c2cb762..887649a 100644
@@ -6,36 +6,36 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be one of the following:
-	"allwinner,sun4i-osc-clk" - for a gatable oscillator
-	"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
+	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
-	"allwinner,sun4i-pll5-clk" - for the PLL5 clock
-	"allwinner,sun4i-pll6-clk" - for the PLL6 clock
-	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
-	"allwinner,sun4i-axi-clk" - for the AXI clock
-	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
-	"allwinner,sun4i-ahb-clk" - for the AHB clock
-	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
+	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
+	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
+	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
-	"allwinner,sun4i-apb0-clk" - for the APB0 clock
-	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
+	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
-	"allwinner,sun4i-apb1-clk" - for the APB1 clock
-	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
-	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
+	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
+	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
-	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 
 Required properties for all clocks:
@@ -58,21 +58,21 @@ For example:
 
 osc24M: osc24M at 01c20050 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-osc-clk";
+	compatible = "allwinner,sun4i-a10-osc-clk";
 	reg = <0x01c20050 0x4>;
 	clocks = <&osc24M_fixed>;
 };
 
 pll1: pll1 at 01c20000 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-pll1-clk";
+	compatible = "allwinner,sun4i-a10-pll1-clk";
 	reg = <0x01c20000 0x4>;
 	clocks = <&osc24M>;
 };
 
 cpu: cpu at 01c20054 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-cpu-clk";
+	compatible = "allwinner,sun4i-a10-cpu-clk";
 	reg = <0x01c20054 0x4>;
 	clocks = <&osc32k>, <&osc24M>, <&pll1>;
 };
drivers/clk/sunxi/clk-sunxi.c +15 -15
index abb6c5a..370db0d 100644
@@ -77,7 +77,7 @@ err_free_gate:
 err_free_fixed:
 	kfree(fixed);
 }
-CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-osc-clk", sun4i_osc_clk_setup);
+CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup);
 
 
 
@@ -970,51 +970,51 @@ free_clkdata:
 
 /* Matches for factors clocks */
 static const struct of_device_id clk_factors_match[] __initconst = {
-	{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
+	{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
 	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
-	{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
-	{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
+	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
+	{.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,},
 	{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
 	{}
 };
 
 /* Matches for divider clocks */
 static const struct of_device_id clk_div_match[] __initconst = {
-	{.compatible = "allwinner,sun4i-axi-clk", .data = &sun4i_axi_data,},
-	{.compatible = "allwinner,sun4i-ahb-clk", .data = &sun4i_ahb_data,},
-	{.compatible = "allwinner,sun4i-apb0-clk", .data = &sun4i_apb0_data,},
+	{.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,},
+	{.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,},
+	{.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,},
 	{.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,},
 	{}
 };
 
 /* Matches for divided outputs */
 static const struct of_device_id clk_divs_match[] __initconst = {
-	{.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,},
-	{.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,},
+	{.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,},
+	{.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,},
 	{}
 };
 
 /* Matches for mux clocks */
 static const struct of_device_id clk_mux_match[] __initconst = {
-	{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
-	{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
+	{.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
+	{.compatible = "allwinner,sun4i-a10-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
 	{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
 	{}
 };
 
 /* Matches for gate clocks */
 static const struct of_device_id clk_gates_match[] __initconst = {
-	{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
-	{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
+	{.compatible = "allwinner,sun4i-a10-axi-gates-clk", .data = &sun4i_axi_gates_data,},
+	{.compatible = "allwinner,sun4i-a10-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
 	{.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,},
-	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
+	{.compatible = "allwinner,sun4i-a10-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
 	{.compatible = "allwinner,sun7i-a20-apb0-gates-clk", .data = &sun7i_a20_apb0_gates_data,},
-	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
+	{.compatible = "allwinner,sun4i-a10-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
Signature · 1 line
1.8.4.2
maintainer
#2 lore raw

PATCH v2 1/2 clk: sunxi: Add new clock compatibles

Hi Maxime,

El 06/02/14 05:55, Maxime Ripard escribi?:

Quoted 6 lines

The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the clock driver for consistency, and keep the older one for backward compatibility.

I have taken this patch on sunxi-clk-for-mike. Please note that there were some conflicts which I had to fix, so I'd appreciate it if you could check I didn't miss anything.

Thanks!

Emilio

#3 lore raw

PATCH v2 2/2 ARM: sunxi: dt: Convert to the new clock compatibles

In reply to Maxime Ripard

Switch the device tree to the new compatibles introduced in the clock drivers to have a common pattern accross all Allwinner SoCs.

---
 arch/arm/boot/dts/sun4i-a10.dtsi  | 60 +++++++++++++++++++--------------------
 arch/arm/boot/dts/sun5i-a10s.dtsi | 48 +++++++++++++++----------------
 arch/arm/boot/dts/sun5i-a13.dtsi  | 48 +++++++++++++++----------------
 arch/arm/boot/dts/sun6i-a31.dtsi  | 10 +++----
 arch/arm/boot/dts/sun7i-a20.dtsi  | 54 +++++++++++++++++------------------
 5 files changed, 110 insertions(+), 110 deletions(-)
arch/arm/boot/dts/sun4i-a10.dtsi +30 -30
index 28273f9..c3fa0da 100644
@@ -60,7 +60,7 @@
 
 		osc24M: osc24M at 01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
 		};
@@ -73,21 +73,21 @@
 
 		pll1: pll1 at 01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
 		};
 
 		pll4: pll4 at 01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
 		};
 
 		pll5: pll5 at 01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
@@ -95,7 +95,7 @@
 
 		pll6: pll6 at 01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -104,21 +104,21 @@
 		/* dummy is 200M */
 		cpu: cpu at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
 		};
 
 		axi: axi at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
 		};
 
 		axi_gates: axi_gates at 01c2005c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-axi-gates-clk";
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
 			clock-output-names = "axi_dram";
@@ -126,14 +126,14 @@
 
 		ahb: ahb at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
 		};
 
 		ahb_gates: ahb_gates at 01c20060 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-ahb-gates-clk";
+			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
@@ -151,14 +151,14 @@
 
 		apb0: apb0 at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
 		};
 
 		apb0_gates: apb0_gates at 01c20068 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb0-gates-clk";
+			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
@@ -168,21 +168,21 @@
 
 		apb1_mux: apb1_mux at 01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
 		};
 
 		apb1: apb1 at 01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
 		};
 
 		apb1_gates: apb1_gates at 01c2006c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb1-gates-clk";
+			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
@@ -195,7 +195,7 @@
 
 		nand_clk: clk at 01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -203,7 +203,7 @@
 
 		ms_clk: clk at 01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -211,7 +211,7 @@
 
 		mmc0_clk: clk at 01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -219,7 +219,7 @@
 
 		mmc1_clk: clk at 01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -227,7 +227,7 @@
 
 		mmc2_clk: clk at 01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -235,7 +235,7 @@
 
 		mmc3_clk: clk at 01c20094 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc3";
@@ -243,7 +243,7 @@
 
 		ts_clk: clk at 01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -251,7 +251,7 @@
 
 		ss_clk: clk at 01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -259,7 +259,7 @@
 
 		spi0_clk: clk at 01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -267,7 +267,7 @@
 
 		spi1_clk: clk at 01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -275,7 +275,7 @@
 
 		spi2_clk: clk at 01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -283,7 +283,7 @@
 
 		pata_clk: clk at 01c200ac {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200ac 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "pata";
@@ -291,7 +291,7 @@
 
 		ir0_clk: clk at 01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
@@ -299,7 +299,7 @@
 
 		ir1_clk: clk at 01c200b4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir1";
@@ -307,7 +307,7 @@
 
 		spi3_clk: clk at 01c200d4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200d4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
arch/arm/boot/dts/sun5i-a10s.dtsi +24 -24

192 lines not on this page · raw message

arch/arm/boot/dts/sun5i-a13.dtsi +24 -24

192 lines not on this page · raw message

arch/arm/boot/dts/sun6i-a31.dtsi +5 -5
index 092bf97..eb97ce4 100644
@@ -97,7 +97,7 @@
 
 		cpu: cpu at 01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20050 0x4>;
 
 			/*
@@ -111,7 +111,7 @@
 
 		axi: axi at 01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20050 0x4>;
 			clocks = <&cpu>;
 		};
@@ -125,7 +125,7 @@
 
 		ahb1: ahb1 at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb1_mux>;
 		};
@@ -153,7 +153,7 @@
 
 		apb1: apb1 at 01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb1>;
 		};
@@ -170,7 +170,7 @@
 
 		apb2_mux: apb2_mux at 01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
 		};
arch/arm/boot/dts/sun7i-a20.dtsi +27 -27

216 lines not on this page · raw message

Signature · 1 line
1.8.4.2
#4 lore raw

PATCH v2 2/2 ARM: sunxi: dt: Convert to the new clock compatibles

Quoted 4 lines · Maxime Ripard

Switch the device tree to the new compatibles introduced in the clock drivers to have a common pattern accross all Allwinner SoCs.

Just applied it.

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140218/2a166fe9/attachment.sig>
#5 lore raw

v2 cover clk: sunxi: Change compatibles pattern

In reply to Maxime Ripard

Quoting Maxime Ripard (2014-02-06 00:55:56)

Quoted 6 lines

Hi,

This is the second version of the clock compatible changes. The only difference with the v1 being that we're now droping the old compatibles, instead of keeping them, since the DT maintainers said it was fine.

Both look good to me.

Regards,
Mike

Quoted 20 lines

Thanks,
Maxime

Maxime Ripard (2):
clk: sunxi: Add new clock compatibles
ARM: sunxi: dt: Convert to the new clock compatibles

 Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++-------
 arch/arm/boot/dts/sun4i-a10.dtsi                  | 60 +++++++++++------------
 arch/arm/boot/dts/sun5i-a10s.dtsi                 | 48 +++++++++---------
 arch/arm/boot/dts/sun5i-a13.dtsi                  | 48 +++++++++---------
 arch/arm/boot/dts/sun6i-a31.dtsi                  | 10 ++--
 arch/arm/boot/dts/sun7i-a20.dtsi                  | 54 ++++++++++----------
 drivers/clk/sunxi/clk-sunxi.c                     | 30 ++++++------
 7 files changed, 143 insertions(+), 143 deletions(-)
Signature · 1 line
1.8.4.2