ARM: tegra: add SPI flash to Venice2 DT
Subsystems (2)
PATCH 1/1 ARM: tegra: add SPI flash to Venice2 DT
From: Stephen Warren <[email protected]>
Venice2 contains an SPI Flash chip, which contains the bootloader. Add this to the DT, so the kernel can access it.
Signed-off-by Stephen Warren <[email protected]>
--- arch/arm/boot/dts/tegra124-venice2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/tegra124-venice2.dts +10 -0
@@ -914,6 +914,16 @@ }; }; + spi at 7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash at 0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + pmc at 7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>;
Signature · 1 line
1.8.1.5
Stephen Warren
AppliedPATCH 1/1 ARM: tegra: add SPI flash to Venice2 DT
Quoted 2 lines · Stephen Warren
Venice2 contains an SPI Flash chip, which contains the bootloader. Add this to the DT, so the kernel can access it.
I've applied this to Tegra's for-3.15/dt branch.