Skip to contentSkip to conversation

ocfs2: dlm: fix recovery hung

PATCH New Junxiao Bi 2 participants 4 messages Feb 19, 2014 – Feb 20, 2014 OCFS2

lore
Share & tools
lore

Junxiao Bi

author
#0 lore raw

PATCH 1/1 ocfs2: dlm: fix recovery hung

Hi Wengang,

I thought about this changes before, it seemed may cause a deadlock. When the new recovery master is sending the RECO_BEGIN message, another node x may be trying to become the recovery master in dlm_pick_recovery_master(), at there, DLM_RECO_STATE_ACTIVE had been set before in dlm_do_recovery(), so the RECO_BEGIN message handler dlm_pick_recovery_master() can not be executed, then dlm->reco.new_master will not be set, so node x will loop in dlm_pick_recovery_master() forever.

Thanks,
Junxiao.

----- Original Message -----
From: [email protected]
To: junxiao.bi at oracle.com, ocfs2-devel at oss.oracle.com
Cc: mfasheh at suse.de, joe.jin at oracle.com
Sent: Wednesday, February 19, 2014 6:10:43 PM GMT +08:00 Beijing / Chongqing / Hong Kong / Urumqi
Subject: Re: [Ocfs2-devel] [PATCH] ocfs2: dlm: fix recovery hung

Seems DLM_RECO_STATE_FINALIZE is used to track the situation that the recovery master(node 0) dead (just) after it had finished the dlm recovery. So that the original dead node(node 1) needed not be recovered again. This flag is set only on non recovery master nodes.
In this case, things looks like the recovery master reset "recover_master" and "dead node" after another node(node 2) had started to recover another dead node(node 3). This would happen only on the "old" recovery master(node 0). Note this flag DLM_RECO_STATE_ACTIVE, it's set only on master when it begins to recover and cleared when recovery finished. For an "old" master, checking DLM_RECO_STATE_ACTIVE makes sense. I'd like to suggest:

fs/ocfs2/dlm/dlmrecovery.c +1 -1
@@ -2704,7 +2704,7 @@ int dlm_begin_reco_handler(struct o2net_msg *msg, u32 len, void *data,
                 return 0;
  
         spin_lock(&dlm->spinlock);
-       if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
+       if (dlm->reco.state & (DLM_RECO_STATE_FINALIZE | DLM_RECO_STATE_ACTIVE)) {
                 mlog(0, "%s: node %u wants to recover node %u (%u:%u) "
                      "but this node is in finalize state, waiting on finalize2\n",
                      dlm->name, br->node_idx, br->dead_node,

thanks
wengang

? 2014?02?19? 16:30, Junxiao Bi ??:

Quoted 82 lines

There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery.

old recovery master: new recovery master:
dlm_remaster_locks()
become recovery master for another dead node. dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{

  if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
   return -EAGAIN;

}
dlm_set_reco_master(dlm, br->node_idx);
dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
will hung in dlm_remaster_locks() for request dlm locks info

Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it.

---
  fs/ocfs2/dlm/dlmrecovery.c |   11 +++++++++--
  1 file changed, 9 insertions(+), 2 deletions(-)
fs/ocfs2/dlm/dlmrecovery.c +9 -2
index 7035af0..fe58e8b 100644
@@ -537,7 +537,10 @@ master_here:
  		/* success!  see if any other nodes need recovery */
  		mlog(0, "DONE mastering recovery of %s:%u here(this=%u)!\n",
  		     dlm->name, dlm->reco.dead_node, dlm->node_num);
-		dlm_reset_recovery(dlm);
+		spin_lock(&dlm->spinlock);
+		__dlm_reset_recovery(dlm);
+		dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+		spin_unlock(&dlm->spinlock);
  	}
  	dlm_end_recovery(dlm);
 
@@ -695,6 +698,10 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node)
  		if (all_nodes_done) {
  			int ret;
 
+			spin_lock(&dlm->spinlock);
+			dlm->reco.state |= DLM_RECO_STATE_FINALIZE;
+			spin_unlock(&dlm->spinlock);
+
  			/* all nodes are now in DLM_RECO_NODE_DATA_DONE state
  	 		 * just send a finalize message to everyone and
  	 		 * clean up */
@@ -2882,8 +2889,8 @@ int dlm_finalize_reco_handler(struct o2net_msg *msg, u32 len, void *data,
  				BUG();
  			}
  			dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+			__dlm_reset_recovery(dlm);
  			spin_unlock(&dlm->spinlock);
-			dlm_reset_recovery(dlm);
  			dlm_kick_recovery_thread(dlm);
  			break;
  		default:
#1 lore raw

PATCH 1/1 ocfs2: dlm: fix recovery hung

Yes. Checking DLM_RECO_STATE_ACTIVE would introduce the dead lock you described. I don't see the need we have to set this flag before picking up the recovery master(till now the remaster locks not started yet). We may think of setting this flag only when the node become the really recovery master. While this may be a separate change.
For your change, seems you changed the use of xxx_FINALIZE(making it also can set on recovery master). you'd better add some comment for that.

? 2014?02?19? 21:44, Junxiao Bi ??:

Quoted 115 lines

Hi Wengang,

I thought about this changes before, it seemed may cause a deadlock. When the new recovery master is sending the RECO_BEGIN message, another node x may be trying to become the recovery master in dlm_pick_recovery_master(), at there, DLM_RECO_STATE_ACTIVE had been set before in dlm_do_recovery(), so the RECO_BEGIN message handler dlm_pick_recovery_master() can not be executed, then dlm->reco.new_master will not be set, so node x will loop in dlm_pick_recovery_master() forever.

Thanks,
Junxiao.

----- Original Message -----
From: wen.gang.wang at oracle.com
To: junxiao.bi at oracle.com, ocfs2-devel at oss.oracle.com
Cc: mfasheh at suse.de, joe.jin at oracle.com
Sent: Wednesday, February 19, 2014 6:10:43 PM GMT +08:00 Beijing / Chongqing / Hong Kong / Urumqi
Subject: Re: [Ocfs2-devel] [PATCH] ocfs2: dlm: fix recovery hung

Seems DLM_RECO_STATE_FINALIZE is used to track the situation that the recovery master(node 0) dead (just) after it had finished the dlm recovery. So that the original dead node(node 1) needed not be recovered again. This flag is set only on non recovery master nodes.
In this case, things looks like the recovery master reset "recover_master" and "dead node" after another node(node 2) had started to recover another dead node(node 3). This would happen only on the "old" recovery master(node 0). Note this flag DLM_RECO_STATE_ACTIVE, it's set only on master when it begins to recover and cleared when recovery finished. For an "old" master, checking DLM_RECO_STATE_ACTIVE makes sense. I'd like to suggest:

fs/ocfs2/dlm/dlmrecovery.c +1 -1
@@ -2704,7 +2704,7 @@ int dlm_begin_reco_handler(struct o2net_msg *msg, u32 len, void *data,
                  return 0;
 
          spin_lock(&dlm->spinlock);
-       if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
+       if (dlm->reco.state & (DLM_RECO_STATE_FINALIZE | DLM_RECO_STATE_ACTIVE)) {
                  mlog(0, "%s: node %u wants to recover node %u (%u:%u) "
                       "but this node is in finalize state, waiting on finalize2\n",
                       dlm->name, br->node_idx, br->dead_node,

thanks
wengang

? 2014?02?19? 16:30, Junxiao Bi ??:

Quoted 82 lines

There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery.

old recovery master: new recovery master:
dlm_remaster_locks()
become recovery master for another dead node. dlm_send_begin_reco_message()
dlm_begin_reco_handler()

{
   if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
    return -EAGAIN;
   }
   dlm_set_reco_master(dlm, br->node_idx);
   dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
   dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
   dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}

will hung in dlm_remaster_locks() for request dlm locks info

Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it.

---
   fs/ocfs2/dlm/dlmrecovery.c |   11 +++++++++--
   1 file changed, 9 insertions(+), 2 deletions(-)
fs/ocfs2/dlm/dlmrecovery.c +9 -2
index 7035af0..fe58e8b 100644
@@ -537,7 +537,10 @@ master_here:
   		/* success!  see if any other nodes need recovery */
   		mlog(0, "DONE mastering recovery of %s:%u here(this=%u)!\n",
   		     dlm->name, dlm->reco.dead_node, dlm->node_num);
-		dlm_reset_recovery(dlm);
+		spin_lock(&dlm->spinlock);
+		__dlm_reset_recovery(dlm);
+		dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+		spin_unlock(&dlm->spinlock);
   	}
   	dlm_end_recovery(dlm);
 
@@ -695,6 +698,10 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node)
   		if (all_nodes_done) {
   			int ret;
 
+			spin_lock(&dlm->spinlock);
+			dlm->reco.state |= DLM_RECO_STATE_FINALIZE;
+			spin_unlock(&dlm->spinlock);
+
   			/* all nodes are now in DLM_RECO_NODE_DATA_DONE state
   	 		 * just send a finalize message to everyone and
   	 		 * clean up */
@@ -2882,8 +2889,8 @@ int dlm_finalize_reco_handler(struct o2net_msg *msg, u32 len, void *data,
   				BUG();
   			}
   			dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+			__dlm_reset_recovery(dlm);
   			spin_unlock(&dlm->spinlock);
-			dlm_reset_recovery(dlm);
   			dlm_kick_recovery_thread(dlm);
   			break;
   		default:
author
#2 lore raw

PATCH 1/1 ocfs2: dlm: fix recovery hung

Hi Wengang,

Quoted 7 lines · Wengang

Yes. Checking DLM_RECO_STATE_ACTIVE would introduce the dead lock you described. I don't see the need we have to set this flag before picking up the recovery master(till now the remaster locks not started yet). We may think of setting this flag only when the node become the really recovery master. While this may be a separate change. For your change, seems you changed the use of xxx_FINALIZE(making it also can set on recovery master). you'd better add some comment for that.

Thank you for reviewing it. I will add some comments for it.

Quoted 2 lines

Do you mean Reviewed-by: Wengang Wang<[email protected]> ?

Thanks,
Junxiao.

Quoted 158 lines

? 2014?02?19? 21:44, Junxiao Bi ??:

Quoted 154 lines

Hi Wengang,

I thought about this changes before, it seemed may cause a deadlock. When the new recovery master is sending the RECO_BEGIN message, another node x may be trying to become the recovery master in dlm_pick_recovery_master(), at there, DLM_RECO_STATE_ACTIVE had been set before in dlm_do_recovery(), so the RECO_BEGIN message handler dlm_pick_recovery_master() can not be executed, then dlm->reco.new_master will not be set, so node x will loop in dlm_pick_recovery_master() forever.

Thanks,
Junxiao.

----- Original Message -----
From: wen.gang.wang at oracle.com
To: junxiao.bi at oracle.com, ocfs2-devel at oss.oracle.com
Cc: mfasheh at suse.de, joe.jin at oracle.com
Sent: Wednesday, February 19, 2014 6:10:43 PM GMT +08:00 Beijing / Chongqing / Hong Kong / Urumqi
Subject: Re: [Ocfs2-devel] [PATCH] ocfs2: dlm: fix recovery hung

Seems DLM_RECO_STATE_FINALIZE is used to track the situation that the recovery master(node 0) dead (just) after it had finished the dlm recovery. So that the original dead node(node 1) needed not be recovered again. This flag is set only on non recovery master nodes. In this case, things looks like the recovery master reset "recover_master" and "dead node" after another node(node 2) had started to recover another dead node(node 3). This would happen only on the "old" recovery master(node 0). Note this flag DLM_RECO_STATE_ACTIVE, it's set only on master when it begins to recover and cleared when recovery finished. For an "old" master, checking DLM_RECO_STATE_ACTIVE makes sense. I'd like to suggest:

fs/ocfs2/dlm/dlmrecovery.c +1 -1
@@ -2704,7 +2704,7 @@ int dlm_begin_reco_handler(struct o2net_msg
 *msg, u32 len, void *data,
                  return 0;
             spin_lock(&dlm->spinlock);
-       if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
+       if (dlm->reco.state & (DLM_RECO_STATE_FINALIZE |
 DLM_RECO_STATE_ACTIVE)) {
                  mlog(0, "%s: node %u wants to recover node %u

(%u:%u) "
"but this node is in finalize state, waiting
on finalize2\n",

                       dlm->name, br->node_idx, br->dead_node,

thanks
wengang

? 2014?02?19? 16:30, Junxiao Bi ??:

Quoted 101 lines

There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the recovery
process for a dead node. After the master sends FINALIZE_RECO message in
dlm_remaster_locks(), another node may become the recovery master for another
dead node, and then send the BEGIN_RECO message to all the nodes included the
old master, in the handler of this message dlm_begin_reco_handler() of old master,
dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead
node and the new master, then in dlm_reset_recovery(), these two variables
will be reset to default value. This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for recovery.

old recovery master: new recovery
master:
dlm_remaster_locks()
become recovery
master for
another dead node.

dlm_send_begin_reco_message()
dlm_begin_reco_handler()

{
   if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
    return -EAGAIN;
   }
   dlm_set_reco_master(dlm, br->node_idx);
   dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
   dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
   dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}

will hung in
dlm_remaster_locks() for
request dlm
locks info

Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE
for itself and clear it after the recovery done, this can break the race windows as
the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is
cleared.

A similar race may happen between new recovery master and normal node which is in
dlm_finalize_reco_handler(), also fix it.

---
   fs/ocfs2/dlm/dlmrecovery.c |   11 +++++++++--
   1 file changed, 9 insertions(+), 2 deletions(-)
fs/ocfs2/dlm/dlmrecovery.c +4 -1
index 7035af0..fe58e8b 100644
@@ -537,7 +537,10 @@ master_here:
           /* success!  see if any other nodes need recovery */
           mlog(0, "DONE mastering recovery of %s:%u here(this=%u)!\n",
                dlm->name, dlm->reco.dead_node, dlm->node_num);
-        dlm_reset_recovery(dlm);
+        spin_lock(&dlm->spinlock);
+        __dlm_reset_recovery(dlm);
+        dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+        spin_unlock(&dlm->spinlock);
       }
       dlm_end_recovery(dlm);
   @@ -695,6 +698,10 @@ static int dlm_remaster_locks(struct

dlm_ctxt *dlm, u8 dead_node)

           if (all_nodes_done) {
               int ret;

+ spin_lock(&dlm->spinlock);

fs/ocfs2/dlm/dlmrecovery.c +4 -1
+            dlm->reco.state |= DLM_RECO_STATE_FINALIZE;
+            spin_unlock(&dlm->spinlock);
+
               /* all nodes are now in DLM_RECO_NODE_DATA_DONE state
                 * just send a finalize message to everyone and
                 * clean up */
@@ -2882,8 +2889,8 @@ int dlm_finalize_reco_handler(struct o2net_msg
 *msg, u32 len, void *data,
                   BUG();
               }
               dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+            __dlm_reset_recovery(dlm);
               spin_unlock(&dlm->spinlock);
-            dlm_reset_recovery(dlm);
               dlm_kick_recovery_thread(dlm);
               break;

default:

#3 lore raw

PATCH 1/1 ocfs2: dlm: fix recovery hung

Yes.

thanks
wengang

? 2014?02?20? 13:51, Junxiao Bi ??:

Quoted 172 lines

Hi Wengang,

Quoted 7 lines · Wengang

Yes. Checking DLM_RECO_STATE_ACTIVE would introduce the dead lock you described. I don't see the need we have to set this flag before picking up the recovery master(till now the remaster locks not started yet). We may think of setting this flag only when the node become the really recovery master. While this may be a separate change. For your change, seems you changed the use of xxx_FINALIZE(making it also can set on recovery master). you'd better add some comment for that.

Thank you for reviewing it. I will add some comments for it.

Quoted 1 line

Do you mean Reviewed-by: Wengang Wang<[email protected]> ?

Thanks,
Junxiao.

Quoted 156 lines

? 2014?02?19? 21:44, Junxiao Bi ??:

Quoted 154 lines

Hi Wengang,

I thought about this changes before, it seemed may cause a deadlock. When the new recovery master is sending the RECO_BEGIN message, another node x may be trying to become the recovery master in dlm_pick_recovery_master(), at there, DLM_RECO_STATE_ACTIVE had been set before in dlm_do_recovery(), so the RECO_BEGIN message handler dlm_pick_recovery_master() can not be executed, then dlm->reco.new_master will not be set, so node x will loop in dlm_pick_recovery_master() forever.

Thanks,
Junxiao.

----- Original Message -----
From: wen.gang.wang at oracle.com
To: junxiao.bi at oracle.com, ocfs2-devel at oss.oracle.com
Cc: mfasheh at suse.de, joe.jin at oracle.com
Sent: Wednesday, February 19, 2014 6:10:43 PM GMT +08:00 Beijing / Chongqing / Hong Kong / Urumqi
Subject: Re: [Ocfs2-devel] [PATCH] ocfs2: dlm: fix recovery hung

Seems DLM_RECO_STATE_FINALIZE is used to track the situation that the recovery master(node 0) dead (just) after it had finished the dlm recovery. So that the original dead node(node 1) needed not be recovered again. This flag is set only on non recovery master nodes. In this case, things looks like the recovery master reset "recover_master" and "dead node" after another node(node 2) had started to recover another dead node(node 3). This would happen only on the "old" recovery master(node 0). Note this flag DLM_RECO_STATE_ACTIVE, it's set only on master when it begins to recover and cleared when recovery finished. For an "old" master, checking DLM_RECO_STATE_ACTIVE makes sense. I'd like to suggest:

fs/ocfs2/dlm/dlmrecovery.c +1 -1
@@ -2704,7 +2704,7 @@ int dlm_begin_reco_handler(struct o2net_msg
 *msg, u32 len, void *data,
                   return 0;
              spin_lock(&dlm->spinlock);
-       if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
+       if (dlm->reco.state & (DLM_RECO_STATE_FINALIZE |
 DLM_RECO_STATE_ACTIVE)) {
                   mlog(0, "%s: node %u wants to recover node %u

(%u:%u) "
"but this node is in finalize state, waiting
on finalize2\n",

                        dlm->name, br->node_idx, br->dead_node,

thanks
wengang

? 2014?02?19? 16:30, Junxiao Bi ??:

Quoted 101 lines

There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the recovery
process for a dead node. After the master sends FINALIZE_RECO message in
dlm_remaster_locks(), another node may become the recovery master for another
dead node, and then send the BEGIN_RECO message to all the nodes included the
old master, in the handler of this message dlm_begin_reco_handler() of old master,
dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead
node and the new master, then in dlm_reset_recovery(), these two variables
will be reset to default value. This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for recovery.

old recovery master: new recovery
master:
dlm_remaster_locks()
become recovery
master for
another dead node.

dlm_send_begin_reco_message()
dlm_begin_reco_handler()

{
    if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
     return -EAGAIN;
    }
    dlm_set_reco_master(dlm, br->node_idx);
    dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
    dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
    dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}

will hung in
dlm_remaster_locks() for
request dlm
locks info

Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE
for itself and clear it after the recovery done, this can break the race windows as
the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is
cleared.

A similar race may happen between new recovery master and normal node which is in
dlm_finalize_reco_handler(), also fix it.

---
    fs/ocfs2/dlm/dlmrecovery.c |   11 +++++++++--
    1 file changed, 9 insertions(+), 2 deletions(-)
fs/ocfs2/dlm/dlmrecovery.c +4 -1
index 7035af0..fe58e8b 100644
@@ -537,7 +537,10 @@ master_here:
            /* success!  see if any other nodes need recovery */
            mlog(0, "DONE mastering recovery of %s:%u here(this=%u)!\n",
                 dlm->name, dlm->reco.dead_node, dlm->node_num);
-        dlm_reset_recovery(dlm);
+        spin_lock(&dlm->spinlock);
+        __dlm_reset_recovery(dlm);
+        dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+        spin_unlock(&dlm->spinlock);
        }
        dlm_end_recovery(dlm);
    @@ -695,6 +698,10 @@ static int dlm_remaster_locks(struct

dlm_ctxt *dlm, u8 dead_node)

            if (all_nodes_done) {
                int ret;
    +            spin_lock(&dlm->spinlock);
fs/ocfs2/dlm/dlmrecovery.c +4 -1
+            dlm->reco.state |= DLM_RECO_STATE_FINALIZE;
+            spin_unlock(&dlm->spinlock);
+
                /* all nodes are now in DLM_RECO_NODE_DATA_DONE state
                  * just send a finalize message to everyone and
                  * clean up */
@@ -2882,8 +2889,8 @@ int dlm_finalize_reco_handler(struct o2net_msg
 *msg, u32 len, void *data,
                    BUG();
                }
                dlm->reco.state &= ~DLM_RECO_STATE_FINALIZE;
+            __dlm_reset_recovery(dlm);
                spin_unlock(&dlm->spinlock);
-            dlm_reset_recovery(dlm);
                dlm_kick_recovery_thread(dlm);
                break;

default: