exynos4412-odroidx.dts doesn't boot

doesn't show anything past Starting Linux... even with earlyprintk and debug_ll enabled (and S3C_UART1)

It also seems to be missing the secure firmware bit (doesn't boot with it).

kernel command line was as follows

setenv bootargs "console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait ro mem=1023M verbose earlyprintk=serial,ttySAC1,115200n8"

tar'd up the boot dir for you as well.
http://dev.gentoo.org/~prometheanfire/dist/kernels/odroidx-boot.tar

What is missing from mainline to get this to work and why isn't it in?

-- Matthew Thode