Unsupported Anysee version

DISCUSSION Antti Palosaari 1 participant 1 message Feb 26, 2014 1 message not in the archive Media (V4L/DVB)

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Antti Palosaari

author

2014-02-26 14:08 UTC #1 lore raw

Moikka Paavo

Quoted 9 lines · Paavo Leinonen

Hi,
I plugged in an old Anysee DVB-C and got “Unsupported Anysee version” error.
The box is Fedora 15 running 3.11.10-100.fc18.x86_64 kernel.
Can I do something to get it working or help you to support it?
Note: I’m not 100% sure the Anysee HW is working, but I assume so.

I think that is some old DVB-C only Anysee E30C model, having black case? It should be working ages, unless there is no new hardware revisions.

* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev0.4)
* parts: TDA10023, DTOS403IH102B TM, TDA8024
* OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
* IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
* IOD[5] TDA10023 1=enabled
* IOE[0] tuner 1=enabled

regards
Antti

Quoted 48 lines

-Paavo

[75103.843017] usb 2-3: new high-speed USB device number 5 using ehci-pci

[75104.593493] usb 2-3: device descriptor read/all, error -71

[75105.085016] usb 2-3: new high-speed USB device number 7 using ehci-pci

[75106.542413] usb 2-3: config 1 interface 0 altsetting 0 bulk endpoint

0x1 has invalid maxpacket 64

[75106.542426] usb 2-3: config 1 interface 0 altsetting 0 bulk endpoint

0x81 has invalid maxpacket 64

[75106.542435] usb 2-3: config 1 interface 0 altsetting 1 bulk endpoint

0x1 has invalid maxpacket 64

[75106.542445] usb 2-3: config 1 interface 0 altsetting 1 bulk endpoint

0x81 has invalid maxpacket 64

[75106.542786] usb 2-3: New USB device found, idVendor=1c73, idProduct=861f

[75106.542797] usb 2-3: New USB device strings: Mfr=1, Product=2,

SerialNumber=0

[75106.542805] usb 2-3: Product: anysee-FA(LP)

[75106.542811] usb 2-3: Manufacturer: AMT.CO.KR

[75106.543148] usb 2-3: dvb_usb_v2: found a 'Anysee' in warm state

[75106.544411] usb 2-3: dvb_usb_anysee: firmware version 1.2 hardware id 15

[75106.544460] usb 2-3: dvb_usb_v2: will pass the complete MPEG2

transport stream to the software demuxer

[75106.544496] DVB: registering new adapter (Anysee)

[75106.553168] usb 2-3: dvb_usb_anysee: Unsupported Anysee version.

Please report to <[email protected]>.

[75106.553187] usb 2-3: dvb_usb_v2: 'Anysee' error while loading driver

(-19)

[75106.554204] usb 2-3: dvb_usb_v2: 'Anysee' successfully deinitialized

and disconnected

Signature · 1 line

http://palosaari.fi/