Skip to contentSkip to conversation

kbuild: wrong version_autogenerated.h

U-Boot Andreas Bießmann 2 participants 2 messages Mar 8, 2014 – Mar 10, 2014

lore
Share & tools
lore
#0 lore raw

Dear Masahiro Yamada,

I noticed a wrongly generated version_autogenerated.h with my default workflow:

---8<---
andreas at andreas-pc % PATH=$AVR32_PATH:$PATH BUILD_NCPUS=2 BUILD_NBUILDS=6 CROSS_COMPILE=avr32-linux- MAKEALL_LOGDIR=/tmp/makeall_logs BUILD_DIR=/tmp/makeall_buildavr32 ./MAKEALL grasshopper
Configuring for grasshopper board...
text data bss dec hex filename
105427 9518 21388 136333 2148d
/tmp/makeall_buildavr32/grasshopper/u-boot

--------------------- SUMMARY ---------------------------- Boards compiled: 0
----------------------------------------------------------
PATH=$AVR32_PATH:$PATH BUILD_NCPUS=2 BUILD_NBUILDS=6 CROSS_COMPILE= = =

    10,69s user 2,68s system 198% cpu 6,740 total

andreas at andreas-pc % cat /tmp/makeall_buildavr32/grasshopper/include/generated/version_autogenerated.h #define PLAIN_VERSION ""
#define U_BOOT_VERSION "U-Boot " PLAIN_VERSION
#define CC_VERSION_STRING "avr32-linux-gcc (OSELAS.Toolchain-2011.11.0) 4.4.7"
#define LD_VERSION_STRING "GNU ld (GNU Binutils) 2.20.1.20100303" andreas@andreas-pc %
--->8---

However using make directly is working correctly:

---8<---
andreas at andreas-pc % PATH=$AVR32_PATH:$PATH CROSS_COMPILE=avr32-linux- make -s O=/tmp/build_grasshopper grasshopper_config all Configuring for grasshopper board...
PATH=$AVR32_PATH:$PATH CROSS_COMPILE=avr32-linux- make -s grasshopper_config 9,84s user 2,66s system 81% cpu 15,406 total andreas at andreas-pc % cat /tmp/build_grasshopper/include/generated/version_autogenerated.h #define PLAIN_VERSION "2014.04-rc1-00277-g180e065"
#define U_BOOT_VERSION "U-Boot " PLAIN_VERSION
#define CC_VERSION_STRING "avr32-linux-gcc (OSELAS.Toolchain-2011.11.0) 4.4.7"
#define LD_VERSION_STRING "GNU ld (GNU Binutils) 2.20.1.20100303" andreas@andreas-pc %
--->8---

I haven't seen anything about that on the list, is it a known bug? Is MAKEALL still a tool to use or is it outdated?
At the moment I have not the time to dive into that problem, maybe I find some minutes next week.

Best regards

Andreas Bie?mann