bd_info: remove bi_barudrate member from struct bd_info

index cb81232..43cc494 100644
@@ -27,7 +27,6 @@
 
 #ifndef __ASSEMBLY__
 typedef struct bd_info {
-	unsigned int	bi_baudrate;	/* serial console baudrate */
     ulong	        bi_arch_number;	/* unique id for this board */
     ulong	        bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_arm_freq; /* arm frequency */

index 92e85c4..9b473b5 100644
@@ -445,7 +445,6 @@ void board_init_f(ulong bootflag)
 	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
-	gd->bd->bi_baudrate = gd->baudrate;
 	/* Ram ist board specific, so move it to board code ... */
 	dram_init_banksize();
 	display_dram_config();	/* and display it */

index bff17d5..6aef808 100644
@@ -7,7 +7,6 @@
 #define __ASM_U_BOOT_H__ 1
 
 typedef struct bd_info {
-	unsigned int		bi_baudrate;
 	unsigned char		bi_phy_id[4];
 	unsigned long		bi_board_number;
 	void			*bi_boot_params;

index 28c2ec0..7680102 100644
@@ -220,7 +220,6 @@ void board_init_f(ulong board_type)
 	 */
 	bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 	bd->bi_dram[0].size = sdram_size;
-	bd->bi_baudrate = gd->baudrate;
 
 	memcpy(new_gd, gd, sizeof(gd_t));
 

index fc36ced..acaeee9 100644
@@ -13,7 +13,6 @@
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-	unsigned int bi_baudrate;	/* serial console baudrate */
 	unsigned long bi_boot_params;	/* where this board expects params */
 	unsigned long bi_memstart;	/* start of DRAM memory */
 	phys_size_t bi_memsize;		/* size  of DRAM memory in bytes */

index 6234201..8784255 100644
@@ -69,7 +69,6 @@ static int display_banner(void)
 static int init_baudrate(void)
 {
 	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
-	gd->bd->bi_baudrate = gd->baudrate;
 	return 0;
 }
 

@@ -92,7 +91,6 @@ static void display_global_data(void)
 	printf(" |-env_valid: %lx\n", gd->env_valid);
 	printf(" |-jt(%p): %p\n", gd->jt, *(gd->jt));
 	printf(" \\-bd: %p\n", gd->bd);
-	printf("   |-bi_baudrate: %x\n", bd->bi_baudrate);
 	printf("   |-bi_boot_params: %lx\n", bd->bi_boot_params);
 	printf("   |-bi_memstart: %lx\n", bd->bi_memstart);
 	printf("   |-bi_memsize: %lx\n", bd->bi_memsize);

index 99de31a..983cb2d 100644
@@ -44,7 +44,6 @@ typedef struct bd_info {
 	unsigned long bi_vcofreq;	/* vco Freq in MHz */
 	unsigned long bi_flbfreq;	/* Flexbus Freq in MHz */
 #endif
-	unsigned int bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 #endif				/* __ASSEMBLY__ */

index e75b6a9..318ca01 100644
@@ -342,7 +342,6 @@ board_init_f (ulong bootflag)
 	bd->bi_vcofreq = gd->arch.vco_clk;		/* vco Freq in Hz */
 	bd->bi_flbfreq = gd->arch.flb_clk;		/* flexbus Freq in Hz */
 #endif
-	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
 #ifdef CONFIG_SYS_EXTBDINFO
 	strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));

index ab3f232..54d415e 100644
@@ -24,7 +24,6 @@ typedef struct bd_info {
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned int	bi_baudrate;	/* Console Baudrate */
 	ulong		bi_boot_params; /* where this board expects params */
 } bd_t;
 

index fafeeae..600c80a 100644
@@ -78,7 +78,6 @@ void board_init_f(ulong not_used)
 	memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
 	gd->bd = bd;
 	gd->baudrate = CONFIG_BAUDRATE;
-	bd->bi_baudrate = CONFIG_BAUDRATE;
 	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
 	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
 	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */

index 985d7d8..564e3d9 100644
@@ -16,7 +16,6 @@
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */

index 9e6ba15..5a77b06 100644
@@ -213,7 +213,6 @@ void board_init_f(ulong bootflag)
 	 */
 	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;	/* start of DRAM */
 	bd->bi_memsize	= gd->ram_size;		/* size of DRAM in bytes */
-	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
 
 	memcpy(id, (void *)gd, sizeof(gd_t));
 

index 8170d28..44e72d4 100644
@@ -23,7 +23,6 @@
 #include <environment.h>
 
 typedef struct bd_info {
-	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */

index 2d4c623..4c06a48 100644
@@ -255,7 +255,6 @@ void board_init_f(ulong bootflag)
 	addr_sp &= ~0x07;
 	debug("New Stack Pointer is: %08lx\n", addr_sp);
 
-	gd->bd->bi_baudrate = gd->baudrate;
 	/* Ram isn't board specific, so move it to board code ... */
 	dram_init_banksize();
 	display_dram_config();	/* and display it */

index 6849b4a..51f6c30 100644
@@ -23,7 +23,6 @@ typedef struct bd_info {
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned int	bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 /* For image.h:image_check_target_arch() */

index bb1a8a7..f24218f 100644
@@ -92,7 +92,6 @@ void board_init(void)
 	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
 	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
 #endif
-	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
 		WATCHDOG_RESET();

index 5c288a8..cdb8ff9 100644
@@ -16,7 +16,6 @@
 #define _U_BOOT_H_
 
 typedef struct bd_info {
-	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */

index 391d1e1..2346685 100644
@@ -84,7 +84,6 @@ void board_init(void)
 	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
 	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
 #endif
-	bd->bi_baudrate = CONFIG_BAUDRATE;
 
 	for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
 		WATCHDOG_RESET();

index 33bc900..6f01d5e 100644
@@ -643,7 +643,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_CPM2
 	do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
-		"current-speed", bd->bi_baudrate, 1);
+		"current-speed", gd->baudrate, 1);
 
 	do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
 		"clock-frequency", bd->bi_brgfreq, 1);

index f4d4a6b..e1b566f 100644
@@ -64,7 +64,6 @@ typedef struct bd_info {
 	unsigned long	bi_ipbfreq;	/* IPB Bus Freq, in MHz */
 	unsigned long	bi_pcifreq;	/* PCI Bus Freq, in MHz */
 #endif
-	unsigned int	bi_baudrate;	/* Console Baudrate */
 #if defined(CONFIG_405)   || \
     defined(CONFIG_405GP) || \
     defined(CONFIG_405EP) || \

index f86c6f3..bae23a1 100644
@@ -531,7 +531,6 @@ void board_init_f(ulong bootflag)
 	bd->bi_ipbfreq = gd->arch.ipb_clk;
 	bd->bi_pcifreq = gd->pci_clk;
 #endif /* CONFIG_MPC5xxx */
-	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
 #ifdef CONFIG_SYS_EXTBDINFO
 	strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));

index 81d5161..ea37c24 100644
@@ -20,7 +20,6 @@ typedef struct bd_info {
 	unsigned long   bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long   bi_sramstart;   /* start of SRAM memory */
 	unsigned long   bi_sramsize;    /* size  of SRAM memory */
-	unsigned int    bi_baudrate;    /* Console Baudrate */
 	unsigned long	bi_boot_params; /* where this board expects params */
 } bd_t;
 

index 8498153..1eb7afb 100644
@@ -155,7 +155,6 @@ void sh_generic_init(void)
 	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
 	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
 #endif
-	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
 		WATCHDOG_RESET();

index 66cf4b0..5f12e58 100644
@@ -40,7 +40,6 @@ typedef struct bd_info {
 	unsigned short bi_ethspeed;	/* Ethernet speed in Mbps */
 	unsigned long bi_intfreq;	/* Internal Freq, in MHz */
 	unsigned long bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 #endif				/* __ASSEMBLY__ */

index c778ba2..b311a94 100644
@@ -173,7 +173,6 @@ void board_init_f(ulong bootflag)
 	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
 	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
 #endif
-	bd->bi_baudrate = CONFIG_BAUDRATE;
 	bd->bi_bootflags = bootflag;	/* boot / reboot flag (for LynxOS)    */
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */

index 42b0a03..08eb5e8 100644
@@ -286,6 +286,8 @@ int board_early_init_r (void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * update "memory" property in the blob
  */

@@ -314,7 +316,7 @@ void ft_blob_update (void *blob, bd_t *bd)
 	/* baudrate */
 	nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
 	if (nodeoffset >= 0) {
-		speed = cpu_to_be32 (bd->bi_baudrate);
+		speed = cpu_to_be32 (gd->baudrate);
 		ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
 					sizeof (unsigned long));
 	if (ret < 0)

index 69abb06..63503e8 100644
@@ -58,7 +58,6 @@ int checkboard (void)
 	u32 BoardType = get_BoardType ();
 	char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" };
 	char *p;
-	bd_t *bd = gd->bd;
 
 	hw_watchdog_reset ();
 

@@ -71,8 +70,8 @@ int checkboard (void)
 	if ((p = getenv ("console_nr")) != NULL) {
 		unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
 
-		bd->bi_baudrate &= ~3;
-		bd->bi_baudrate |= con_nr & 3;
+		gd->baudrate &= ~3;
+		gd->baudrate |= con_nr & 3;
 	}
 	return 0;
 }

index f285bad..067fceb 100644
@@ -708,14 +708,6 @@ static int init_post(void)
 }
 #endif
 
-static int setup_baud_rate(void)
-{
-	/* Ick, can we get rid of this line? */
-	gd->bd->bi_baudrate = gd->baudrate;
-
-	return 0;
-}
-
 static int setup_dram_config(void)
 {
 	/* Ram is board specific, so move it to board code ... */

@@ -954,7 +946,6 @@ static init_fnc_t init_sequence_f[] = {
 	INIT_FUNC_WATCHDOG_RESET
 	setup_board_part2,
 #endif
-	setup_baud_rate,
 	display_new_sp,
 #ifdef CONFIG_SYS_EXTBDINFO
 	setup_board_extra,

index 238cadb..f283a16 100644
@@ -148,7 +148,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_mhz("ethspeed",		bd->bi_ethspeed);
 #endif
 	printf("IP addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %6u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %6u bps\n", gd->baudrate);
 	print_num("relocaddr", gd->relocaddr);
 	board_detail();
 	return 0;

@@ -176,7 +176,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
 
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -198,7 +198,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #if defined(CONFIG_CMD_NET)
 	print_eths();
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 	return 0;
 }
 

@@ -231,7 +231,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate               = %6u bps\n", bd->bi_baudrate);
+	printf("baudrate               = %6u bps\n", gd->baudrate);
 	return 0;
 }
 

@@ -277,7 +277,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -304,7 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -324,7 +324,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -344,7 +344,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -368,7 +368,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #if defined(CONFIG_CMD_NET)
 	print_eths();
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 	print_num("TLB addr", gd->arch.tlb_addr);
 #endif

@@ -406,7 +406,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 	return 0;
 }
 

@@ -440,7 +440,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 	print_mhz("ethspeed",	    bd->bi_ethspeed);
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -490,7 +490,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -512,7 +512,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
 
-	printf("baudrate    = %u bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", gd->baudrate);
 
 	return 0;
 }

@@ -530,7 +530,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %d bps\n", gd->baudrate);
 
 	return 0;
 }

index df05bde..831b618 100644
@@ -74,9 +74,6 @@ static int on_baudrate(const char *name, const char *value, enum env_op op,
 		}
 
 		gd->baudrate = baudrate;
-#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
-		gd->bd->bi_baudrate = baudrate;
-#endif
 
 		serial_setbrg();
 

@@ -502,12 +499,11 @@ int uart_post_test(int flags)
 	unsigned char c;
 	int ret, saved_baud, b;
 	struct serial_device *saved_dev, *s;
-	bd_t *bd = gd->bd;
 
 	/* Save current serial state */
 	ret = 0;
 	saved_dev = serial_current;
-	saved_baud = bd->bi_baudrate;
+	saved_baud = gd->baudrate;
 
 	for (s = serial_devices; s; s = s->next) {
 		/* If this driver doesn't support loop back, skip it */

@@ -530,7 +526,7 @@ int uart_post_test(int flags)
 
 		/* Test every available baud rate */
 		for (b = 0; b < ARRAY_SIZE(bauds); ++b) {
-			bd->bi_baudrate = bauds[b];
+			gd->baudrate = bauds[b];
 			serial_setbrg();
 
 			/*

@@ -572,7 +568,7 @@ int uart_post_test(int flags)
  done:
 	/* Restore previous serial state */
 	serial_current = saved_dev;
-	bd->bi_baudrate = saved_baud;
+	gd->baudrate = saved_baud;
 	serial_reinit_all();
 	serial_setbrg();
 

index c18e4ca..62cb1ea 100644
@@ -66,7 +66,6 @@ typedef struct bd_info {
 	unsigned long	bi_ipbfreq;	/* IPB Bus Freq, in MHz */
 	unsigned long	bi_pcifreq;	/* PCI Bus Freq, in MHz */
 #endif
-	unsigned int	bi_baudrate;	/* Console Baudrate */
 #if defined(CONFIG_405)   || \
 		defined(CONFIG_405GP) || \
 		defined(CONFIG_405EP) || \