: Please pull u-boot-imx

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 00b132bf34c5be86a108ac7fe8231ad9e97f6de4:

config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to 0x43e00000
(2014-04-02 21:00:04 +0900)

are available in the git repository at:

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1a9df13d5bc0b68c9dcae88d244c995c9351db67:

arm: mxs: Add support for generating signed BootStream (2014-04-04
11:44:59 +0200)

----------------------------------------------------------------
Eric Nelson (1):
ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x

Fabio Estevam (1):
woodburn_sd: Remove CONFIG_BOOT_INTERNAL

Marek Vasut (12):
arm: mxs: Adjust the load address of U-Boot and SPL for HAB
arm: mxs: Add support for generating signed BootStream
ARM: mxs: Add OCOTP driver
pci: mx6: Implement power callback
ARM: mx6: Add PCIe on SabreSDP
arm: mx5: Fix memory slowness on MX53QSB
arm: mx5: Avoid hardcoding memory sizes on MX53QSB
arm: mx5: Fix memory slowness on M53EVK
arm: mx5: Avoid hardcoding memory sizes on M53EVK
arm: mxs: Properly set GD pointer in SPL
arm: mxs: Add serial console support into SPL
arm: mxs: Add support for generating signed BootStream

Stefano Babic (5):
mxs: fix warning in SPL with console support
imx: add rules for U-Boot DTB support
mx6: add example DTB for mx6qsabreauto
Revert "arm: mxs: Add support for generating signed BootStream" Merge branch 'master' of git://git.denx.de/u-boot-arm into master

 Makefile                                       |    8 +-
 arch/arm/config.mk                             |    4 +
 arch/arm/cpu/arm926ejs/mxs/Makefile            |   60 +++++
 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
 arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
 arch/arm/dts/Makefile                          |    1 +
 arch/arm/dts/imx6q-sabreauto.dts               |   13 +
 arch/arm/imx-common/Makefile                   |    8 +
 board/denx/m53evk/m53evk.c                     |   31 ++-
 board/freescale/mx53loco/mx53loco.c            |   31 ++-
 board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
 drivers/misc/Makefile                          |    1 +
 drivers/misc/mxs_ocotp.c                       |  311
++++++++++++++++++++++++
 drivers/pci/pcie_imx.c                         |   13 +-
 include/configs/m53evk.h                       |    8 +-
 include/configs/mx53loco.h                     |   10 +-
 include/configs/mx6qsabreauto.h                |    3 +
 include/configs/mx6sabresd.h                   |   10 +
 include/configs/mxs.h                          |   15 +-
 include/configs/nitrogen6x.h                   |    1 -
 include/configs/woodburn_sd.h                  |    2 -
 24 files changed, 564 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 drivers/misc/mxs_ocotp.c

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Hi Stefano,

Applied to u-boot-arm/master, thanks!

Amicalement,

Albert.